Name: Festool WOOD FINE CUT Jigsaw Blades S 75/2,5/25 – 75 mm, 2.5 mm Pitch, 25 Pack
Brand: FESTOOL
SKU: FES204257
Price: 2248.25 ZAR
Availability: InStock

Festool WOOD FINE CUT Jigsaw Blades S 75/2,5/25

At a Glance: 25 fine-cutting HCS jigsaw blades with a 75 mm cutting length, 2.5 mm tooth pitch and universal T-shank fitting. For suitable wooden materials up to 30 mm thick.

Give your woodworking a cleaner finish with Festool WOOD FINE CUT S 75/2,5/25 Jigsaw Blades. Designed for precise cutting in wooden materials, these blades use high-grade HCS tool steel and conically ground cutting geometry to produce fine edges with reduced splintering. Their 2.5 mm tooth pitch makes them a practical choice for work where the quality of the cut matters, including solid wood, plywood and suitable wood-based panels. The universal T-shank fits the specified Festool jigsaws and many other professional machines with a compatible blade holder. Supplied in a 25-piece pack, they provide a useful workshop supply for furniture, joinery, installation and general woodworking tasks within the stated 30 mm maximum material thickness.

WOOD FINE CUT – Designed Around Cut Quality

The Fine Cut geometry is intended to produce accurately cut wooden surfaces with minimal splintering. Match the machine settings, feed rate and workpiece support to the material to obtain the best result.

Product Highlights

Fine cutting geometry: Conically ground blades are designed for clean edges and reduced splintering.
High-grade HCS steel: High-carbon tool steel for cutting suitable wooden materials.
75 mm cutting length: The stated length of the blade's cutting section.
2.5 mm tooth pitch: Fine-cutting tooth spacing for controlled woodworking applications.
30 mm maximum workpiece thickness: Select a longer suitable blade for thicker material.
Universal T-shank: Compatible with the specified Festool jigsaws and other suitable T-shank machines.
25 blades per pack: Provides a practical supply of replacement blades for regular use.

Product Compatibility

Festool PS 300 and PSB 300: Suitable for these jigsaw models.
Festool PS 400 and PSB 400: Suitable for these jigsaw models.
Festool PSC 400 and PSBC 400: Suitable for these cordless jigsaw models.
Festool PS 420 and PSB 420: Suitable for these jigsaw models.
Festool PSC 420 and PSBC 420: Suitable for these cordless jigsaw models.
Other T-shank jigsaws: Check the machine manufacturer's blade requirements before fitting.

Capacity note: The 75 mm cutting length does not indicate a 75 mm cutting capacity. Festool specifies a maximum workpiece thickness of 30 mm for this blade. Check clearance throughout the complete blade stroke before cutting.

Extra Information

Understanding S 75/2,5/25

The designation identifies a 75 mm cutting length, 2.5 mm tooth pitch and 25 blades per pack. Preserve this complete model designation when matching replacement blades.

What Does HCS Mean?

HCS means high-carbon steel. This blade uses high-grade HCS tool steel for wooden material applications. Choose a blade specifically intended for the material being cut when working outside those applications.

Machine Settings Affect the Finish

Feed pressure, stroke speed and pendulum action influence the finished edge. For a fine cut, begin with settings appropriate to the material and check the result on an offcut. Avoid forcing the saw through the workpiece.

Check the Visible Face

Test the surface finish on the face that will remain visible. Use a compatible splinterguard where appropriate, following the jigsaw manufacturer's instructions.

Replace Blades Before Cut Quality Deteriorates

A dull, bent or damaged blade can increase cutting effort and affect accuracy. Inspect the blade when cutting performance changes and replace it when necessary.

Parts Numbers Matter

Important: Please confirm Festool article number 204257, the T-shank fitting and the 25-piece pack before ordering.

Pro Tips

Make a test cut in matching scrap material to establish the best finish and settings.
Support the workpiece securely and provide clearance beneath the cutting line.
Keep the jigsaw base flat against the workpiece throughout the cut.
Use steady feed pressure and let the teeth perform the cutting.
Check blade sharpness if the cut begins to wander or requires noticeably more effort.
Store unused blades where their teeth are protected from damage.

How to Use

Disconnect the jigsaw from its power supply or remove its battery before changing the blade.
Check that the material is suitable and no more than 30 mm thick.
Fit the T-shank securely into the blade holder and adjust any blade guides according to the machine instructions.
Secure the workpiece and check that the blade has unobstructed clearance throughout its stroke.
Select suitable stroke speed and pendulum settings, then make a test cut if the finish is important.
Place the base securely on the workpiece and feed the saw along the marked line without forcing or twisting the blade.
Wait for the blade to stop completely before lifting the saw away or adjusting the workpiece.
Allow the blade to cool before removal and inspect it before reuse.

Features

WOOD FINE CUT classification: A blade type focused on fine results in wooden materials.
Conically ground geometry: Designed to produce clean, low-splinter cuts.
HCS tool steel: High-carbon steel construction for the specified material applications.
T-shank mounting: Fits a compatible jigsaw blade holder.
25-piece pack: Contains 25 blades of the same specification.

Benefits

Neater cut edges: Fine cutting geometry helps limit splintering and subsequent cleanup.
Controlled woodworking: Suitable for components where the finished cut requires care.
Consistent blade selection: Keep the same blade specification available for repeat tasks.
Convenient replacement supply: Replace a dull or damaged blade without interrupting work to obtain another pack.
Broad machine compatibility: The T-shank format suits the listed Festool machines and many other compatible jigsaws.

Applications

Fine cutting in suitable solid wood up to 30 mm thick.
Cutting plywood components.
Cutting suitable chipboard, blockboard and other wooden panel materials.
Preparing furniture and joinery components where edge quality matters.
Workshop and installation cuts within the blade's stated material capacity.

Safety

Follow the jigsaw manufacturer's operating and blade-fitting instructions.
Disconnect the power supply or remove the battery before changing blades or adjusting blade guides.
Check that the blade is correctly seated and securely locked before starting.
Secure the workpiece and keep hands clear of the blade above and below the material.
Check the cutting path for nails, screws and other hidden obstructions.
Wear suitable eye and hearing protection. Use dust extraction and respiratory protection appropriate to the material.
Do not use bent, cracked or damaged blades.
Wait for the blade to stop and allow it to cool before handling.

Festool WOOD FINE CUT Jigsaw Blades S 75/2,5/25 – 75 mm, 2.5 mm Pitch, 25 Pack