Taper Adaptor Mt2 - Jt6 Cmmt Morse Taper

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 70
Model: CMJT6-1
Weight: 0.18kg
Pack Dim: 120.00mm x 20.00mm x 20.00mm
UPC: 6009515887841

Price:

R 126.56

Ex VAT: R 110.05

Available Options

Stockist

Tork Craft Taper Adaptor — MT2 → JT6

This is a MT2 male to JT6 male taper adaptor for mounting JT6-type chucks onto machines or arbors with an MT2 spindle. The hardened, precision-ground Morse and Jacobs tapers ensure accurate seating and concentricity.

Extra Information

Clean and degrease both tapers before assembly to maximize grip.
Seat the adaptor firmly without heavy impact — avoid striking on the chuck body.
Remove using the machine’s taper ejection system or the proper wedge/drift tool.

Pro Tip

Mark the orientation of the adaptor and chuck with a witness line — reassembling to the same orientation can help retain ideal alignment.
If the adaptor feels slightly “sticky,” carefully deburr any minor raised spots with a fine stone rather than coarse filing.

Features

MT2 (Morse #2) male taper — for machine spindle/arbors.
JT6 (Jacobs Taper #6) male taper — for JT6-bore chucks or tooling.
Hardened, precision-ground steel construction for durability and accuracy.
Smooth bearing surfaces to promote clean seating and withdrawal.
Industry standard taper geometry for compatibility with tooling.

Benefits

Versatility: allows use of JT6 chucks on MT2 machines without replacing the entire arbor.
Accurate running: low run-out and tight fit for precision drilling.
Ease of use: press-fit design—no complex setup needed.

Safety

Always interrupt power or lock out machine before installing or removing the adaptor.
Ensure tapers are fully seated and aligned — side loads must be avoided.
Use in **rotary only mode** — avoid hammer or impact use with taper-mounted chucks.
Wear eye protection; secure the workpiece before drilling.

Specifications

Description	Spec
Brand	Tork Craft
Model / Cat No.	CMJT6-1
Adaptor Type	Taper adaptor (MT2 → JT6)
Machine Side Taper	MT2 (Morse Taper #2), male
Chuck Side Taper	JT6 (Jacobs Taper #6), male
Material / Finish	Hardened, precision-ground steel
Typical Uses	Fitting JT6 chucks to MT2 machines such as drill presses, lathes, mills (in drill mode)