Chuck & Key 13mm 1/2"x 20unf & Sds Adaptor

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Pack Size: 4
Stock: 7572
Model: CM113
Weight: 0.38kg
Pack Dim: 96.00mm x 202.00mm x 12.00mm
UPC: 6009675088065

Price:

R 135.99

Ex VAT: R 118.25

Available Options

Stockist

Tork Craft Chuck & Key — 13 mm, 1/2″ × 20 UNF + SDS Adaptor

Convert your SDS drill for standard round/hex shank bits. This 13 mm keyed chuck with 1/2″ × 20 UNF thread includes an SDS adaptor and matching chuck key—ideal for general drilling in wood, plastics and light metals when hammer action isn’t required.

Extra Information

Use rotary (drill) mode only; do not engage hammer with an add-on chuck.
Ensure the SDS adaptor clicks and locks fully before mounting the chuck.
Periodically clean spindle/adaptor splines and apply a light machine oil.

Pro Tip

Seat the bit fully, then tighten in all three key holes for the most concentric grip—this minimizes run-out on small bits.
Mark the adaptor and chuck with a paint pen so you can realign to the same position after removal for repeatable concentricity.

Features

13 mm capacity — accepts bits from ~1.5 mm up to 13 mm.
Keyed design for high clamping force and secure grip.
1/2″ × 20 UNF female thread (standard drill spindle size).
SDS adaptor to fit SDS/SDS-Plus drill nose for rotary use.
Hardened jaws & metal body for durability and accuracy.
Chuck key included for tightening/loosening.

Benefits

Versatile: run conventional shank bits on an SDS drill in rotary mode.
Strong hold: keyed tightening reduces bit slip on tougher materials.
Quick setup: adaptor installs and removes easily when switching tasks.

Safety

Disconnect power and set drill to rotary (no hammer) before use.
Check that the SDS adaptor is fully latched and the bit is tightly clamped.
Do not exceed the chuck’s rated capacity; avoid heavy percussion loads.
Wear eye protection; secure the workpiece before drilling.

Specifications

Description	Spec
Brand	Tork Craft
Model / Cat No.	CM113
Product Type	Keyed drill chuck with adaptor
Chuck Capacity	1.5–13 mm
Chuck Thread	1/2″ × 20 UNF (female)
Adaptor Interface	SDS / SDS-Plus (to drill nose)
Construction	All-metal body, hardened jaws
Included	Chuck, chuck key, SDS adaptor
Typical Uses	General drilling in wood, plastic, light metal (rotary only)