Menu
Your Cart

Festool KL-KS 120 Workpiece Hold-Down Clamp for KAPEX KS 120 and KS 88

Festool KL-KS 120 Workpiece Hold-Down Clamp for KAPEX KS 120 and KS 88
Festool KL-KS 120 Workpiece Hold-Down Clamp for KAPEX KS 120 and KS 88
  • Brand: FESTOOL
  • Model: FES494391
  • Weight: 0.84kg
  • Dim: 325 mm x 140 mm x 60 mm
  • UPC: 4014549079096
Price:
R 2,260.33
Ex VAT: R 1,965.50

Available Options

Festool KL-KS 120 KAPEX Workpiece Hold-Down Clamp

At a Glance: Quick-action workpiece clamp for Festool KAPEX KS 120 and KS 88 mitre saws. Fits on either side of the blade and accommodates workpieces up to 120 mm high.

Keep your workpiece firmly positioned for accurate cross-cutting with the Festool KL-KS 120 Hold-Down Clamp. Designed specifically for KAPEX KS 120 and KS 88 mitre saws, this clamp secures the material against the saw table to help prevent movement during cutting. Its quick-action cam mechanism makes clamping and release convenient, while the protective plastic pressure foot helps preserve the workpiece surface. The octagonal foot is shaped to allow positioning close to the fence, and the clamp can be mounted on either the left or right side to suit the cutting setup. Whether replacing a missing or worn original clamp or maintaining your KAPEX accessories, the KL-KS 120 provides a practical way to keep suitable workpieces stable throughout the cut.

Stable Workpieces Support Precise Results

A correctly positioned clamp holds the material against the table while the fence provides its reference position. This helps maintain the intended alignment as the saw enters and passes through the workpiece.

Product Highlights

  • Dedicated KAPEX compatibility: Designed for Festool KS 120 and KS 88 mitre saws.
  • Left or right mounting: Position the clamp on the side that best suits the workpiece and cutting arrangement.
  • Quick-action cam mechanism: Enables convenient clamping and release between cuts.
  • Protective plastic foot: Helps avoid marking the material when the contact surfaces are clean.
  • Octagonal pressure foot: Allows practical placement close to the saw fence.
  • 120 mm maximum workpiece height: Accommodates a range of suitable workpiece sizes within the saw's operating limits.
  • Original equipment replacement: This clamp is included in the standard contents of the KS 120 and KS 88.

Product Compatibility

  • Festool KAPEX KS 120: Suitable for the KS 120 family, including KS 120 REB models.
  • Festool KAPEX KS 88: Suitable for the KS 88 family, including KS 88 RE models.
  • Mounting position: Uses the designated clamp mounting point on either side of the saw.

Compatibility note: The 120 mm specification is the clamp's maximum workpiece height. It does not increase the saw's cutting capacity. Check the machine's permitted cutting dimensions and clamp clearance for the selected mitre and bevel angles.

Features

  • Workpiece hold-down design: Secures suitable material against the KAPEX saw table.
  • Cam-operated clamping: Provides a quick-action locking and release mechanism.
  • Plastic contact foot: Helps protect the workpiece surface.
  • Octagonal foot shape: Supports positioning adjacent to the fence.
  • Flexible mounting: Can be fitted to the left or right side of the machine.

Benefits

  • More consistent positioning: Helps prevent the workpiece from shifting during the cut.
  • Convenient repeat work: Quick clamping and release simplify handling between successive cuts.
  • Surface protection: The plastic pressure foot reduces direct contact between the clamp mechanism and the material.
  • Adaptable setup: Choose the mounting side to suit workpiece access and blade clearance.
  • Restore the original clamping arrangement: A suitable replacement for a missing or damaged original KAPEX clamp.

Applications

  • Securing suitable timber and trim components during cross-cutting.
  • Holding workpieces for mitre cuts with adequate clamp and blade clearance.
  • Supporting stable positioning during permitted bevel and compound cuts.
  • Clamping furniture, joinery and interior finishing components.
  • Replacing the original workpiece clamp on a compatible KAPEX saw.

Extra Information

Workpiece Clamping and Saw Mounting

The KL-KS 120 holds the material on the saw table. The saw itself must also be securely installed on a suitable bench or stand in accordance with its instructions.

Check Clearance After Angle Changes

Changing the mitre angle, bevel angle or sliding position changes the path of the saw head and blade. With the machine disconnected, check the complete intended movement before making a cut.

Support Long Material Separately

The clamp secures the workpiece at the saw. Long material still needs suitable support so that it remains stable and does not tip or pull against the clamped section.

Protect Finished Surfaces

Keep the pressure foot and workpiece clean. Trapped chips or grit can leave marks even when a protective plastic foot is used. Check pressure carefully on delicate or compressible materials.

Parts Numbers Matter

Important: Please confirm Festool article number 494391 and the KAPEX machine model before ordering to ensure compatibility.

Pro Tips

  • Seat the workpiece firmly against the table and fence before engaging the clamp.
  • Place the pressure foot on a stable contact area clear of the cutting path.
  • Clean chips from the table, fence and pressure foot between cuts.
  • Check clamp clearance whenever the cutting angle or workpiece arrangement changes.
  • Use suitable supports for long stock and ensure that the material remains level.

How to Use

  • Disconnect the saw from its power supply before installing or repositioning the clamp.
  • Fit the clamp into the designated left or right mounting point following the machine instructions.
  • Place the workpiece securely against the saw table and fence.
  • Adjust the clamp to the workpiece height and position the pressure foot on a stable surface.
  • Engage the cam mechanism and confirm that the material is firmly held.
  • With the machine still disconnected, check the saw head's complete cutting movement for clearance.
  • Make the cut according to the saw instructions. Wait until the blade has stopped before releasing the clamp or removing the workpiece.

Safety

  • Follow the KAPEX operating instructions for clamp installation and workpiece positioning.
  • Disconnect the saw before fitting or repositioning the clamp and checking blade clearance.
  • Keep the clamp, its pressure foot and your hands clear of the blade's complete cutting path.
  • Do not cut material that cannot be securely positioned and supported.
  • Avoid excessive clamping pressure that could deform or damage the workpiece.
  • Use suitable eye and hearing protection and effective dust extraction during sawing.
  • Wait for the blade to stop completely before releasing the workpiece.

Specifications

Description Spec
BrandFestool
Product Description:Mitre Saw Workpiece Clamp
Cat No.FES494391
Festool Article Number494391
ModelKL-KS 120
Product TypeWorkpiece hold-down clamp
Compatible MachinesFestool KAPEX KS 120 and KS 88
Maximum Workpiece Height120 mm
Mounting SideLeft or right
Clamping MechanismQuick-action cam
Pressure FootProtective plastic foot with octagonal shape
Primary FunctionSecuring workpieces against the saw table
Quantity in Pack1 clamp

Scope of Delivery:

  • 1 x Festool KL-KS 120 workpiece hold-down clamp, article 494391.

Important note: One clamp can be mounted on either side; this product is not a pair.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy