Tork Craft CKP1205 Corner Round Router Bit 1/2 Inch with 1/4 Inch Shank

Name: Tork Craft CKP1205 Corner Round Router Bit 1/2 Inch with 1/4 Inch Shank
Brand: TORK CRAFT
SKU: CKP1205
Price: 227.13 ZAR
Availability: InStock

Tork Craft CKP1205 Corner Round Router Bit 1/2 Inch with 1/4 Inch Shank

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: CKP1205
Weight: 0.11kg
Pack Dim: 40.00mm x 48.00mm x 98.00mm
UPC: 6009675085620

TORK CRAFT

Price:

R 227.13

Ex VAT: R 197.50

Available Options

Stockist

Tork Craft CKP1205 Corner Round Router Bit 1/2 Inch 1/4 Inch Shank

At a Glance: 1/2 inch corner round router bit with 1/4 inch shank, tungsten carbide cutting edge and 1/2 inch bearing for smooth rounded woodworking edges.

The Tork Craft CKP1205 Corner Round Router Bit is designed for creating larger, smooth and professional rounded edges on timber and suitable woodworking materials. It is ideal for softening sharp corners on furniture parts, shelves, cabinet components, table edges, frames and general woodworking projects where a bold rounded edge profile is required.

The bit features a tungsten carbide cutting edge for clean and accurate cutting, while the 1/4 inch shank fits compatible router collets. The bearing-guided design helps the bit follow the edge of the workpiece, making it easier to achieve a consistent profile. This is a handy finishing bit for carpenters, craftsmen, hobbyists, DIY users and woodworking workshops.

Standard Yellow corner round router bit for bold edge profiling

The CKP1205 forms part of the Tork Craft corner round bit range and is specifically engineered to provide smooth and accurate cutting. It is a practical choice for projects that need a larger rounded profile for a softer, more refined and professional finish.

Product highlights

1/2 inch corner round profile Designed for producing a larger rounded edge on suitable timber and woodworking materials.
1/4 inch shank Designed for use with routers fitted with a compatible 1/4 inch collet.
Tungsten carbide cutting edge Provides clean cutting performance and good wear resistance.
Bearing guided The 1/2 inch bearing helps the router bit follow the workpiece edge.
Professional edge finish Ideal for furniture, shelving, frames, cabinets, moulding and trim work.
Smooth and accurate cutting Specifically engineered to help deliver controlled woodworking results.

Definition: The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.

Extra Information

The CKP1205 is a corner round router bit with a 1/4 inch shank.
The listed radius for this bit is 7/16 inch.
Use only in a compatible router collet and with a router machine.
Ensure that at least 3/4 of the shank length is inserted into the router collet.
Do not bottom-out the bit in the collet. Leave approximately 1/8 inch clearance from the bottom of the collet.
When removing larger amounts of stock, route in two or more passes for better control and finish.
For outside edges, feed the router anti-clockwise. For inside edges or frames, feed clockwise when using a portable router.
Suggested maximum router speed for a 1.5 inch diameter bit is typically reduced compared with smaller bits. Always follow the router manufacturer’s speed guidance.

Pro Tips

Test the profile on a scrap piece of the same material before routing the final workpiece.
Use shallow passes rather than removing too much material in one cut, especially with larger round-over profiles.
Keep the router base flat and steady against the workpiece to avoid uneven edges.
Make sure the bearing is clean and spins freely before use.
Use a router table and fence whenever possible for better control and repeatable results.

How to Use

Make sure the router is switched off and unplugged before fitting the bit.
Insert at least 3/4 of the shank length into the router collet, leaving about 1/8 inch clearance from the bottom.
Tighten the collet securely according to the router manufacturer’s instructions.
Set the cutting depth to achieve the required corner round profile.
Secure the workpiece firmly before routing.
Start the router and allow it to reach full speed before contacting the workpiece.
Feed the router steadily in the correct direction and avoid forcing the bit.
Switch off the router and wait for the bit to stop completely before removing it from the workpiece.

Features

Corner round profile Designed to round over sharp edges for a smoother and more decorative finish.
Tungsten carbide cutting edge Helps deliver clean, accurate cuts in suitable woodworking materials.
HSS body and shank Strong body and shank construction for dependable router bit performance.
1/2 inch bearing Allows controlled edge-following when routing along a workpiece edge.
Larger profile size Suitable for projects where a more visible and comfortable rounded edge is required.

Benefits

Improves appearance: Creates a smooth rounded edge that gives woodworking projects a more complete and professional look.
Softens sharp corners: Helps remove harsh edges from boards, shelves, frames, tabletops and cabinet parts.
Consistent results: The bearing helps guide the bit for a more even profile along the edge.
Comfortable edge finish: A rounded edge feels better to handle and can improve the final feel of the project.
Great finishing bit: A useful router accessory for carpentry, furniture making, trim work and DIY woodworking.

Application

Rounding over timber edges.
Decorative edge profiling on woodworking projects.
Furniture, shelving, tabletop and cabinet finishing.
Frame, trim and moulding work.
DIY, carpentry, craft and woodworking projects.
Use with router machines only.

Safety

Always use the correct router bit for the job.
Using any tool can be dangerous when incorrect procedures are followed.
Always wear eye and ear protection when using a router.
Wear suitable gloves when handling the bit, as the cutting edges are sharp.
Follow all safety and use instructions supplied with your router.
Never use router bits that are dull, damaged or visibly worn.
The bit can become hot after use; allow it to cool before handling.
Do not force the bit or overload the router.
Use a router table and fence whenever possible, especially with larger diameter bits.
Use reduced speeds for larger diameter bits and always follow the router manufacturer’s speed guidance.
Failure to follow safety instructions and warnings can result in serious bodily injury.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	CKP1205
Barcode	6009675085620
Product Type	Corner Round Router Bit
Product Description	Router Bit Corner Round 1/2 Inch
Product Classification	Standard Yellow
Radius	7/16 inch
A Dimension	1-1/2 inch
B Dimension	3/4 inch
Shank Diameter	1/4 inch
D Dimension	32mm
Bearing	1/2 inch
Cutting Edge Material	Tungsten Carbide
Body & Shank Material	HSS (High Speed Steel)
Packaging Type	Hanging Card / Blister
Sales Unit	Each
Recommended Machine	Router Machine
Warranty	6 Months

In the box / Packaging:

1 x Tork Craft CKP1205 Corner Round Router Bit 1/2 Inch
Supplied in hanging card / blister packaging

Explaining the Specifications:

(d) -> The diameter of the shank or shaft. This size should be the same as the collet size of your router. Example: a small router is mostly supplied with a quarter inch collet that is 6,35 mm inside diameter.
Common collet sizes:
- 1/4" collet = 6,35mm inside diameter
- 8mm collet = 8mm inside diameter
- 12mm collet = 12mm inside diameter
- 1/2" collet = 12,7mm inside diameter
- NOTE that the 12mm and the 12,7mm (1/2") sizing are often misunderstood. 1/4 inch is not 6mm but exactly 6,35mm. A 6mm shank will not fit in a 1/4 in collet. Wrong sizes will either break the collet or the bit will fall out.
TCT = Tungsten Carbide Tipped
Allways stay in the MAX Speed range of router bit