Elbow 6mm-3/8 M Pu Hose Fitting

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SPL06-03
Weight: 0.02kg
Pack Dim: 25.00mm x 12.00mm x 12.00mm
UPC: 6009515828813

Price:

R 32.20

Ex VAT: R 28.00

Available Options

Stockist

AirCraft Elbow 6mm-3/8" M BSP PU Hose Fitting

At a Glance: 6mm push-in tube connection to 3/8" Male BSP thread in a space-saving 90° elbow.

Tidy routing, fast installation, fewer leaks. The AirCraft Elbow 6mm-3/8" M BSP PU Hose Fitting is a push-in pneumatic connector that lets you run 6mm tubing neatly around corners while threading straight into a 3/8" BSP female port. It’s ideal for compressed-air layouts where space is tight or where straight fittings would kink the tube. Push the tube in, tighten the threaded end, and you’ve got a clean 90° connection for PU/nylon air lines on compressors, regulators, FRLs, manifolds and pneumatic tools.

Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings

Designed for quick, reliable tube connections with a compact elbow body that keeps hose runs neat and reduces stress on tubing at the port.

Extra Information

Designed for typical pneumatic tubing such as PU (polyurethane) and nylon in 6mm OD. Use clean, undamaged tube for best sealing.
BSP thread note: This fitting is 3/8" Male BSP. Confirm your port thread type (BSP vs NPT) before installing.
For threaded sealing, use a suitable thread sealant (e.g., PTFE tape or pneumatic thread sealant) as required by your application.

Pro Tip

Cut the tube perfectly square, push it in fully until it bottoms out, then give it a gentle pull to confirm it’s locked—finish by leak-testing with soapy water.

Features

Push-in 6mm tube connection Quick, tool-free tubing fitment for clean pneumatic plumbing.
3/8" Male BSP thread Fits common BSP threaded ports on air equipment and control components.
90° elbow design Routes tubing around corners to prevent tight bends and kinks.
Compact body Ideal for cramped installations, panels and close-coupled components.

Benefits

Faster installations: Push tube in and connect—perfect for quick maintenance and line changes.
Neater air lines: Improves hose routing, reduces strain on tubing and keeps setups looking professional.
More reliable sealing: A proper push-in grip and correct thread sealing help minimise air leaks.

Safety

Isolate and depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not over-tighten threaded connections—use correct tools and a suitable thread sealant to prevent damage and leaks.
After installation, leak-test the joint before returning equipment to service.
Use only within the rated limits of your pneumatic system and compatible tubing/materials.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SPL06-03
Product Type	Push-In Pneumatic Elbow Fitting
Tube Size	6mm (OD)
Thread Type	BSP
Thread Size	3/8" Male
Connection Angle	90° Elbow
Typical Use	Compressed air / pneumatic tubing lines (PU/Nylon)