Pu Hose Fitting Tee 10mm X 10mm X 1/4"m

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG APD10-02
Weight: 0.04kg
Pack Dim: 65.00mm x 17.00mm x 17.00mm
UPC: 6009515846718

Price:

R 52.44

Ex VAT: R 45.60

Available Options

Stockist

AirCraft PU Hose Fitting Tee 10mm x 10mm x 1/4" BSP (SG APD10-02)

At a Glance; 10 mm tube tee with 1/4" BSP male thread for neat air line branching

The AirCraft SG APD10-02 PU Hose Fitting Tee 10mm x 10mm x 1/4" BSP is a reliable hybrid connector for compressed-air systems where you need to branch a 10 mm tube line and connect into equipment with a threaded port. With two 10 mm push-in tube ports and a 1/4" BSP male thread, it’s ideal for regulators, manifolds, valves and workshop air accessories—keeping your pneumatic layout compact, tidy and easy to service.

Hybrid tee: push-in tubing plus 1/4" BSP thread

This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means fewer potential leak points and a cleaner installation overall.

Extra Information

For use with 10 mm outside diameter pneumatic tubing (commonly PU/nylon).
The threaded end is 1/4" BSP male, a common standard on many workshop air components.
For best sealing, cut tubing square and clean, and seal threaded joints as required for your application.

Pro Tip

Support the fitting body while tightening the threaded end to avoid twisting the tube lines, then leak-test with soapy water after pressurising.

Features

Dual 10 mm push-in ports Quick-connect branching for 10 mm pneumatic tubing.
1/4" BSP male thread Screws into compatible ports on regulators, manifolds and air accessories.
Compact tee body Neat routing in panels, benches and machine frames.
Service-friendly design Makes upgrades and maintenance quicker with less clutter.

Benefits

Cleaner air plumbing: Branch your 10 mm line and connect to a threaded port in one fitting.
Faster installs: Push-in tube connections reduce assembly time and downtime.
Reduced leak risk: Fewer adaptors and unnecessary joins means fewer places for air loss.

Safety

Wear eye protection when working with pressurised air lines.
Depressurise the system before installing or removing pneumatic fittings.
Route tubing to avoid kinks, abrasion and snag points that can cause leaks or failure.
Do not exceed the rated limits of your compressor, regulator, hoses and fittings.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG APD10-02
Product Type	PU Hose Fitting Tee (Tube Tee with BSP Thread)
Tube Size	10 mm x 10 mm (OD)
Thread Size	1/4" BSP Male
Connection Type	Push-In Tube Ports + Threaded Port
Suitable Tubing	PU / Nylon Pneumatic Tube
Application	Compressed Air Line Branching & Equipment Connection