Name: Metal Pu Fitting Elbow 12mm 1/4" M
Brand: AIRCRAFT
SKU: SG MPL12-02
Price: 129.95 ZAR
Availability: InStock

AirCraft Metal PU Fitting Elbow 12mm x 1/4" Male (SG MPL12-02)

At a Glance; Compact 90° elbow with 12mm push-in tube connection and 1/4" male thread.

The AirCraft SG MPL12-02 Metal PU Fitting Elbow is a tidy, workshop-ready connector for turning a 12mm pneumatic line into a common 1/4" threaded port—without bulky bends or messy routing. It connects 12mm pneumatic/PU tubing to a 1/4" male threaded outlet, giving you a clean 90° turn where space is tight and a neat installation matters. Ideal for compressed-air systems on regulators, manifolds, valves, cylinders and general pneumatic equipment, this metal elbow helps keep air lines secure, organised and leak-resistant.

Reliable 90° AirCraft metal push-in elbow fitting for 12mm tube

Designed for compact pneumatic layouts, this elbow connector keeps routing clean while providing a strong threaded connection to your air system components.

Extra Information

Use clean, round 12mm pneumatic/PU tubing and ensure the cut is square before inserting.
Apply suitable thread sealant/PTFE tape to the male thread if required by your application and port type.
After inserting the tube fully, do a gentle pull-back test, then pressurise and check for leaks with soapy water.

Pro Tip

If you’re running longer 12mm lines, use tube clips/supports—reducing vibration and movement helps prevent slow leaks.

AirCraft Metal PU Fitting Elbow 12mm x 1/4" Male (SG MPL12-02)

At a Glance; Compact 90° elbow with 12mm push-in tube connection and 1/4" male thread.

The AirCraft SG MPL12-02 Metal PU Fitting Elbow is a tidy, workshop-ready connector for turning a 12mm pneumatic line into a common 1/4" threaded port—without bulky bends or messy routing. It connects 12mm pneumatic/PU tubing to a 1/4" male threaded outlet, giving you a clean 90° turn where space is tight and a neat installation matters. Ideal for compressed-air systems on regulators, manifolds, valves, cylinders and general pneumatic equipment, this metal elbow helps keep air lines secure, organised and leak-resistant.

Reliable 90° AirCraft metal push-in elbow fitting for 12mm tube

Designed for compact pneumatic layouts, this elbow connector keeps routing clean while providing a strong threaded connection to your air system components.

Safety

Always depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not exceed your system’s rated pressure and inspect tubing regularly for damage or wear.
Pressurise slowly after installation and check for leaks using soapy water (never use open flames).

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG MPL12-02
Product Type	Metal PU/Pneumatic Push-In Elbow Fitting
Tube Size	12mm
Thread Type	Male
Thread Size	1/4"
Angle	90° Elbow
Material	Metal