Valve Needle Assembley For Sg H2000 Sprat Gun

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG H2000-34
Pack Dim: 173.00mm x 80.00mm x 40.00mm

Price:

R 22.89

Ex VAT: R 19.90

Available Options

Stockist

AirCraft Valve Needle Assembly SG H2000-34 For SG H2000 Spray Gun

At a Glance: Replacement valve/needle assembly for the SG H2000—restores proper sealing and smooth, controllable spray output.

The AirCraft SG H2000-34 Valve Needle Assembly is a key service spare for the AirCraft SG H2000 spray gun. The needle is the precision part that controls fluid flow: as you operate the trigger, the needle moves to open or close the fluid passage, regulating how much coating is delivered. If the needle is bent, worn, scratched, or the assembly is damaged, you’ll quickly notice problems—dripping, poor shut-off, inconsistent flow, and spray patterns that just won’t behave. Replacing the valve needle assembly brings back crisp control and proper sealing, helping your SG H2000 spray cleanly and predictably again.

Clean Shut-Off and Better Control: the SG H2000-34 Needle Assembly

A good needle-to-nozzle seal is what prevents dripping and keeps atomisation consistent. Fit a fresh assembly and you restore the “fine control” feel that makes spraying enjoyable instead of a battle. Match the Cat No. SG H2000-34 to ensure correct fitment for the SG H2000.

Extra Information

Compatibility: Spare part for AirCraft SG H2000 spray gun.
Common symptoms of wear: Dripping at rest, inconsistent flow, poor shut-off, or uneven spray pattern.
Check nozzle condition: A worn nozzle can also cause poor sealing—inspect or replace as needed.
Clean handling: Keep the needle tip protected—scratches or knocks can affect sealing and spray quality.

Pro Tip

When installing a new needle assembly, flush the gun with the correct cleaner first and ensure the nozzle is clean. A tiny bit of dried material can stop a new needle from sealing properly.

Features

Precision valve needle assembly Controls coating flow through the SG H2000 spray gun.
Designed for proper sealing Helps the needle seat correctly to prevent unwanted dripping.
Restores smooth trigger response Correct needle movement supports predictable control.
Model-specific spare Part-number referenced for the AirCraft SG H2000.

Benefits

Reduces dripping and leaking: Fresh needle/seal contact improves shut-off performance.
Improves spray consistency: Stable flow helps maintain an even pattern and atomisation.
Better control: More predictable trigger response helps avoid heavy spots and runs.
Cost-effective repair: Replace the core wear component instead of the whole spray gun.

Safety

Disconnect the air supply and release pressure before servicing the spray gun.
Wear eye protection and gloves when handling paint and cleaning solvents.
Work in a well-ventilated area—solvent fumes can be harmful.
Keep the needle tip protected—avoid bending or scratching during installation.
After reassembly, test flow and shut-off using cleaner or water (where appropriate) before spraying paint.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG H2000-34
Product Type	Valve Needle Assembly (Spray Gun Spare Part)
Compatible With	AirCraft SG H2000 spray gun
Function	Controls fluid flow and provides shut-off sealing
Operation	Moves with trigger to regulate coating delivery
Material	Metal precision component (typical)
Replacement Use	Direct replacement by part number