Pu Hose Fitting Tee 12mm X 12mm X 1/8"m

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG APD12-01
Weight: 0.04kg
Pack Dim: 65.00mm x 20.00mm x 20.00mm
UPC: 6009515846749

Price:

R 78.43

Ex VAT: R 68.20

Available Options

Stockist

AirCraft PU Hose Fitting Tee 12mm x 12mm x 1/8" BSP (SG APD12-01)

At a Glance; 12 mm tube tee with 1/8" BSP male thread for clean, high-capacity air line branching

The AirCraft SG APD12-01 PU Hose Fitting Tee 12mm x 12mm x 1/8" BSP is a tidy hybrid connector for pneumatic systems where you need to branch a 12 mm tube line and connect into a threaded port at the same time. With two 12 mm push-in tube ports and a 1/8" BSP male thread, it’s ideal for integrating larger tubing runs into gauge blocks, compact valves, manifolds and control components—keeping your compressed-air setup neat, reliable and easy to service.

Hybrid tee: push-in tubing plus 1/8" BSP thread

This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means a cleaner installation and fewer potential leak points across your air line.

Extra Information

For use with 12 mm outside diameter pneumatic tubing (commonly PU/nylon).
The threaded end is 1/8" BSP male, commonly used on gauge ports, compact valves and small manifolds.
For best sealing, cut tubing square and clean, and seal threaded joints as required for your application.

Pro Tip

Support the fitting body while tightening the threaded end to avoid twisting the tube lines, then leak-test with soapy water after pressurising.

Features

Dual 12 mm push-in ports Quick-connect branching for 12 mm pneumatic tubing.
1/8" BSP male thread Screws into compatible ports on compact pneumatic components.
Compact tee body Neat routing in panels, benches and machine frames.
Service-friendly design Makes upgrades and maintenance quicker with less clutter.

Benefits

Cleaner air plumbing: Branch your 12 mm line and connect to a threaded port in one fitting.
Faster installs: Push-in tube connections reduce assembly time and downtime.
Reduced leak risk: Fewer adaptors and unnecessary joins means fewer places for air loss.

Safety

Wear eye protection when working with pressurised air lines.
Depressurise the system before installing or removing pneumatic fittings.
Route tubing to avoid kinks, abrasion and snag points that can cause leaks or failure.
Do not exceed the rated limits of your compressor, regulator, hoses and fittings.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG APD12-01
Product Type	PU Hose Fitting Tee (Tube Tee with BSP Thread)
Tube Size	12 mm x 12 mm (OD)
Thread Size	1/8" BSP Male
Connection Type	Push-In Tube Ports + Threaded Port
Suitable Tubing	PU / Nylon Pneumatic Tube
Application	Compressed Air Line Branching & Equipment Connection