Nozzle/needle Kit 0.5mm For Lm3000m

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: In Stock
Model: SG LM3000M-3
Weight: 0.09kg
Pack Dim: 173.00mm x 80.00mm x 40.00mm
UPC: 6009515809683

Price:

R 546.14

Ex VAT: R 474.90

Available Options

Stockist

AirCraft Nozzle & Needle Kit 0.5mm For LM3000M (SG-LM3000M-3)

At a Glance: 0.5mm nozzle and needle kit for ultra-fine control and crisp atomisation on the LM3000M spray gun

When you need maximum control and the finest possible spray delivery, the nozzle and needle set is where the magic (and the precision) lives. The AirCraft SG-LM3000M-3 Nozzle & Needle Kit (0.5mm) is a matched replacement set for the LM3000M spray gun, designed to restore tight, consistent atomisation and reliable sealing. A 0.5mm setup is ideal for detail work and light coatings where you want less material per pass, cleaner edges, and a smoother finish—especially when worn or damaged parts have started causing spitting, pulsing, poor fan shape, or frustrating leaks.

Matched 0.5mm kit for fine spray performance and precise control

Because the needle and nozzle wear together, replacing them as a matched kit helps restore proper alignment and sealing. It’s the practical fix when cleaning doesn’t solve the issue, or when the needle tip has been bent and the gun can’t produce a clean, predictable pattern anymore.

Extra Information

Always strain paint before spraying—0.5mm setups are more sensitive to tiny particles and dried paint.
Follow coating manufacturer thinning guidelines to achieve proper atomisation and avoid clogging.
Clean the gun immediately after use; dried paint around the needle/nozzle is the quickest way to ruin spray quality.
After installation, test-spray on cardboard to confirm pattern and flow before spraying the final surface.

Pro Tip

If you’re doing fine work, keep a small in-line filter at the gun and strain every mix—most “mystery splatter” problems are just tiny bits of contamination meeting a small nozzle.

Features

Matched Nozzle & Needle Kit Replaces both key wear components for correct fit and sealing.
0.5mm Size Supports ultra-fine atomisation and very controlled material flow.
LM3000M Compatibility Designed for the AirCraft LM3000M spray gun.
Restores Spray Pattern Helps correct spitting, pulsing, uneven fan patterns, and poor control caused by wear.

Benefits

High-Precision Finishing: Improves control for fine work where consistent output matters.
Less Overspray and Waste: Lower flow helps reduce material build-up and improves accuracy.
Reduced Leakage Risk: Matched parts help improve sealing compared to replacing components individually.
Cost-Effective Maintenance: Extends the usable life of your spray gun without replacing the whole tool.

Safety

Wear eye protection and a respirator suitable for paint fumes, especially with solvent-based coatings.
Work in a well-ventilated area and keep ignition sources away from paint and thinners.
Shut off the air supply and depressurise the spray gun before disassembly or fitting parts.
Handle the needle carefully—its tip is precision-ground and can be damaged by knocks or bending.
Wear chemical-resistant gloves when cleaning with thinners and wash hands after use.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG-LM3000M-3
Product Type	Nozzle & Needle Kit
Nozzle Size	0.5mm
Compatible Model	LM3000M Spray Gun
Typical Use	Spray gun maintenance / fine nozzle and needle replacement