Driver Bumper Collar Kit (13-16/18/19/24) For At0019

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: AT0019-SK06
Weight: 0.38kg
Pack Dim: 60.00mm x 25.00mm x 25.00mm
UPC: 6009515852733

Price:

R 261.34

Ex VAT: R 227.25

Available Options

Stockist

AirCraft Driver, Bumper & Collar Kit (13-16,18,19,24) For AT0019 (AT0019-SK06)

At a Glance: Driver and impact-control service kit (Parts 13–16, 18, 19 & 24) that brings back crisp driving action while cushioning impact and reducing wear inside the AirCraft AT0019.

When an air stapler starts “tapping” instead of driving, or the staples sit proud no matter what you do, the wear is often happening where the hard work happens: the driver system and the bumper/collar components that control the stroke. The driver delivers the impact, and the bumper absorbs it—over time those parts take a beating. The AirCraft AT0019-SK06 Driver, Bumper & Collar Kit covers parts 13–16, 18, 19 and 24 from the AT0019 spares diagram. It’s designed to restore strong, consistent staple driving and help protect internal components by properly cushioning the piston/driver return and maintaining correct internal spacing. Perfect for rebuilds, repairs, and preventative servicing on AT0019 staplers used daily in workshops, factories and installation work.

Heavy-duty driver section refresh for the AirCraft AT0019

This kit focuses on the driver and the parts that guide and cushion its movement—critical for consistent drive depth, reduced internal shock, and long-term reliability.

Extra Information

Compatible with: AirCraft AT0019 Air Stapler (21 Gauge, 12.7mm crown, 4–16mm staples).
Common symptoms this kit helps address: weak drive, inconsistent depth, rough cycling, and excessive internal knocking.
For best results, inspect the magazine/nose area for debris and check for bent staples—feed issues can mimic driver wear.

Pro Tip

After fitting the driver components, test-drive a few staples on scrap material and adjust regulator pressure gradually—run the lowest pressure that still sets staples cleanly to reduce wear and extend service life.

Features

Parts 13–16, 18, 19 & 24 coverage Service kit aligned to the AT0019 spares diagram for the driver/bumper/collar section.
Driver performance components Restores the driving mechanism responsible for staple setting power and consistency.
Impact cushioning parts included Helps absorb shock and reduce harsh internal impact during cycling.
Correct-fit AirCraft spare kit Designed specifically for the AirCraft AT0019 for proper fitment and smooth operation.

Benefits

Cleaner staple setting: Helps restore consistent drive depth and reduces “half-driven” staples.
Reduced internal wear: Fresh bumper/collar parts help cushion impact and protect internal assemblies.
Smoother cycling: Correct spacing and guidance can improve overall firing feel and reset behaviour.
Cost-effective rebuild: A practical way to refresh the working end of your AT0019 without replacing the whole tool.

Safety

Disconnect the air supply and fully depressurise the stapler before servicing the driver assembly.
Wear eye protection—components can be under tension and may shift during disassembly.
Test the tool with no staples loaded first, then test on scrap material before returning to full work.
Keep hands clear of the nose and firing area at all times and ensure all fasteners are secure before pressurising.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	AT0019-SK06
Product Type	Air Stapler Spare Part / Driver Service Kit
Part Reference	Driver, Bumper & Collar Kit (13–16, 18, 19, 24)
Compatible Model	AT0019