Spare Nozzle Kit 1.3mm For Sg H827

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG H827-05
Weight: 0.11kg
Pack Dim: 150.00mm x 90.00mm x 38.00mm
UPC: 6009515806156

Price:

R 249.21

Ex VAT: R 216.70

Available Options

Stockist

AirCraft Spare Nozzle Kit 1.3mm SG-H827-05 For SG-H827

At a Glance: 1.3mm nozzle set to refresh your SG-H827—ideal for dependable flow and consistent spraying when your current set is worn or blocked.

The AirCraft SG-H827-05 Spare Nozzle Kit 1.3mm is a replacement nozzle set for the AirCraft SG-H827 spray gun. The nozzle set is where spray quality is born (or destroyed): the needle, fluid nozzle and air cap work together to meter flow and atomise coating into a controlled pattern. Once these parts wear, get scratched, or pick up stubborn residue, the gun starts acting up—spitting, poor atomisation, uneven fan edges, and dripping from a needle that won’t seal properly. A 1.3mm setup is a popular all-rounder size for many general spraying tasks, giving a solid balance of flow and control. Fit a fresh kit and you’re back to smooth, predictable spraying.

Restore the Spray “Sweet Spot”: the SG-H827-05 1.3mm Nozzle Set

When the needle and nozzle seal correctly, you get clean shut-off and consistent atomisation. This kit replaces the key wear parts so your SG-H827 can spray like it should. Match the Cat No. SG-H827-05 to ensure correct fitment for the SG-H827.

Extra Information

Compatibility: Spare nozzle kit for AirCraft SG-H827 spray gun.
When to replace: Persistent spray issues after cleaning, or visible damage/wear on needle/nozzle.
Paint prep matters: Strain coatings and mix correctly to reduce clogging and improve finish quality.
Careful fitting: Avoid over-tightening the nozzle and protect the needle tip from knocks.

Pro Tip

Test-spray on cardboard after fitting the kit and dial in air pressure gradually. A new nozzle set often needs minor adjustment to hit the cleanest atomisation and fan pattern.

Features

Complete 1.3mm nozzle kit Replaces the main wear components that control flow and spray pattern.
Precision spray components Needle/nozzle fit supports clean sealing and consistent atomisation.
Designed for SG-H827 Model-specific spare nozzle kit for correct compatibility.
Workshop-ready replacement Ideal for servicing, rebuilds, or restoring a gun after damage or heavy use.

Benefits

Improves spray consistency: Helps eliminate spitting, patchy coverage and uneven fan edges.
Better shut-off: Fresh needle/nozzle contact helps reduce dripping and leaking.
Reliable atomisation: Stable air cap/nozzle geometry supports a smoother finish.
Cost-effective maintenance: Replace wear parts instead of replacing the entire spray gun.

Safety

Spray in a well-ventilated area and wear suitable respiratory protection.
Wear eye protection and gloves when handling coatings and cleaning solvents.
Disconnect the air supply and release pressure before changing needle/nozzle/air cap parts.
Keep solvents and coatings away from open flames and heat sources.
Dispose of cleaning waste responsibly according to local regulations.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG-H827-05
Product Type	Spare Nozzle Kit (Needle/Nozzle/Air Cap Set)
Nozzle Size	1.3mm
Compatible With	AirCraft SG-H827 spray gun
Function	Controls coating flow, atomisation and spray pattern
Replacement Use	Direct replacement by part number
Typical Use	General spraying applications (coating dependent)

Spray Gun Hvlp 1.4mm Nozzle 600cc Plastic Cup

AirCraft Spray Gun Hvlp 1.4mm Nozzle 600cc Plastic Cup At a Glance; HVLP gravity feed spray gun with 1.4mm nozzle and 600cc plastic cup for smooth, c..

R 435.85

Ex VAT:R 379.00