Elbow W/o-ring 6mm-1/8 M Pu Hose Fitting

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SPL06-G01
Weight: 0.02kg
Pack Dim: 25.00mm x 13.00mm x 13.00mm
UPC: 6009515829599

Price:

R 18.75

Ex VAT: R 16.30

Available Options

Stockist

AirCraft Elbow With O-ring 6mm-1/8" M BSP PU Hose Fitting

At a Glance: 6mm push-in tube connection to 1/8" Male BSP thread with an O-ring seal in a compact 90° elbow.

Small fitting, big difference in tight pneumatic layouts. The AirCraft Elbow With O-ring 6mm-1/8" M BSP PU Hose Fitting is a push-in elbow connector that lets you route 6mm tubing neatly around a corner while threading into a 1/8" BSP female port. The integrated O-ring helps improve sealing at the threaded connection (especially on suitable ports), making it a smart choice for compact air circuits on compressors, regulators, FRLs, manifolds and pneumatic tools where you want a cleaner, more reliable 90° connection.

Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings with O-Ring Seal

Fast push-in tube connection paired with an O-ring at the thread to support a leak-resistant, professional finish in compact pneumatic installations.

Extra Information

Use with 6mm OD PU or nylon pneumatic tubing. For best sealing, cut the tube square and keep it clean.
Thread check: This fitting is 1/8" Male BSP. Confirm your port is BSP (not NPT) before fitting.
O-ring sealing works best on compatible ports. Depending on your equipment and sealing surface, a suitable thread sealant may still be required.

Pro Tip

Before tightening, make sure the O-ring is seated properly and the port face is clean—tighten firmly but don’t overdo it, then leak-test with soapy water.

Features

Push-in 6mm tube connection Quick, tool-free tubing fitment for fast installs and maintenance.
1/8" Male BSP thread Fits common BSP threaded ports on pneumatic valves, regulators and manifolds.
O-ring sealed thread Helps enhance sealing at the port face on compatible connections.
90° elbow design Routes tubing neatly in tight spaces and reduces tube stress and kinking.

Benefits

Cleaner routing: Turns the line neatly at the port to keep installations tidy and compact.
Reduced leak risk: O-ring support plus correct tube insertion helps improve sealing confidence.
Less downtime: Push-in connection makes tube changes faster during servicing.

Safety

Isolate and depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not over-tighten—excess force can damage threads, crush the O-ring or distort sealing surfaces.
After installation, leak-test the joint before returning equipment to service.
Use only within the rated limits of your pneumatic system and with compatible tubing/materials.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SPL06-G01
Product Type	Push-In Pneumatic Elbow Fitting (O-Ring Seal)
Tube Size	6mm (OD)
Thread Type	BSP
Thread Size	1/8" Male
Seal Type	O-Ring
Connection Angle	90° Elbow
Typical Use	Compressed air / pneumatic tubing lines (PU/Nylon)