Pu Hose Fitting Tee 8mm X 8mm X 1/2"m

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG APD08-04
Weight: 0.04kg
Pack Dim: 59.00mm x 12.00mm x 12.00mm
UPC: 6009515848750

Price:

R 61.18

Ex VAT: R 53.20

Available Options

Stockist

AirCraft PU Hose Fitting Tee 8mm x 8mm x 1/2" BSP (SG APD08-04)

At a Glance; 8 mm tube tee with 1/2" BSP male thread for robust air line branching

The AirCraft SG APD08-04 PU Hose Fitting Tee 8mm x 8mm x 1/2" BSP is a heavy-duty hybrid connector for compressed-air systems where you need to branch an 8 mm tube line and connect into a larger threaded port in one neat fitting. With two 8 mm push-in tube ports and a 1/2" BSP male thread, it’s ideal for larger manifolds, distribution blocks, valves and workshop air accessories—keeping your pneumatic layout compact, reliable and easy to service.

Hybrid tee: push-in tubing plus 1/2" BSP thread

This fitting helps avoid stacked adaptors by combining tube-to-tube branching with a threaded connection point in one compact body. Fewer joins means fewer potential leak points, while the push-in ports make tubing changes quick during maintenance.

Extra Information

For use with 8 mm outside diameter pneumatic tubing (commonly PU/nylon).
The threaded end is 1/2" BSP male, commonly used on larger manifolds, valves and air accessories.
For best sealing, cut tubing square and clean, and seal threaded joints as required for your application.

Pro Tip

Support the fitting body while tightening the threaded end to avoid twisting the tube lines, then leak-test with soapy water after pressurising.

Features

Dual 8 mm push-in ports Quick-connect branching for 8 mm pneumatic tubing.
1/2" BSP male thread Screws into compatible ports on larger air components and manifolds.
Compact tee body Keeps routing neat in panels, benches and machine frames.
Service-friendly design Simplifies upgrades, re-routing and routine maintenance.

Benefits

Cleaner air plumbing: Branch your 8 mm line and connect to a larger threaded port in one fitting.
More robust threaded interface: 1/2" thread suits higher-capacity manifolds and distribution points.
Reduced leak risk: Fewer adaptors and unnecessary joins means fewer places for air loss.

Safety

Wear eye protection when working with pressurised air lines.
Depressurise the system before installing or removing pneumatic fittings.
Route tubing to avoid kinks, abrasion and snag points that can cause leaks or failure.
Do not exceed the rated limits of your compressor, regulator, hoses and fittings.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG APD08-04
Product Type	PU Hose Fitting Tee (Tube Tee with BSP Thread)
Tube Size	8 mm x 8 mm (OD)
Thread Size	1/2" BSP Male
Connection Type	Push-In Tube Ports + Threaded Port
Suitable Tubing	PU / Nylon Pneumatic Tube
Application	Compressed Air Line Branching & Equipment Connection