Metal Flow Control 6mm X 1/8" M

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG MSC06-01
Weight: 0.03kg
Pack Dim: 35.00mm x 31.00mm x 13.00mm
UPC: 6009515891879

Price:

R 174.51

Ex VAT: R 151.75

Available Options

Stockist

AirCraft Metal Flow Control 6mm x 1/8" Male Thread (SG MSC06-01)

At a Glance: Precision metal flow control valve with 6mm push-in tube port and 1/8" male thread—fine-tune airflow for smoother pneumatic performance.

Pneumatics is basically “air with opinions”—and the AirCraft SG MSC06-01 helps you keep those opinions under control. This metal flow control valve connects a 6mm PU tube to a 1/8" male threaded port, giving you adjustable airflow where it matters most: cylinder speed control, stabilising air circuits, and reducing harsh bursts of air. Compact, durable, and easy to dial in, it’s the difference between a system that lurches and a system that glides.

Standout feature: Fine adjustment for repeatable pneumatic speed control

Make small airflow changes that produce consistent, predictable motion—ideal for tuning actuators and air circuits so they run smoothly and reliably.

Extra Information

Ideal for pneumatic cylinders, air circuits, compact machines, and regulated compressed air lines.
For best sealing, use clean, square-cut 6mm tubing and ensure it is fully seated in the push-in port.
Many flow controls are directional—check any arrow/markings on the body (if present) to confirm recommended flow direction.
Admin info (not for specs table): Product weight ±0.05 kg; Dimensions ±48 x 18 x 18 mm.

Pro Tip

Adjust in small increments under working pressure. A tiny turn can noticeably change cylinder speed—especially on shorter strokes.

Features

Adjustable flow control Enables accurate restriction of airflow to suit your application.
6mm push-in tube connection Quick-fit design for fast installation and easy tube changes.
1/8" male thread Common threaded connection for many pneumatic ports and manifolds.
Metal construction Tough, workshop-ready build for dependable long-term use.
Compact profile Suits tight spaces in panels, machines, and control circuits.

Benefits

Smoother actuator movement: Helps reduce jerky starts/stops and improves repeatability.
Less noise and air waste: Use only the airflow you need instead of “maximum drama”.
Quicker setup and tuning: Simple adjustment makes optimisation easy during install and maintenance.

Safety

Always depressurise the air system before installing, removing, or adjusting pneumatic fittings.
Wear eye protection when working with compressed air lines and push-in fittings.
Do not over-tighten threaded connections—tighten securely and use an appropriate thread seal (if required).
After installation, perform a leak test and confirm stable operation before returning equipment to service.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG MSC06-01
Product Type	Metal Flow Control Valve
Tube Size	6mm
Thread Size	1/8"
Thread Type	Male
Typical Use	Pneumatic Flow / Speed Control (Compressed Air)
Body Material	Metal