Pu Hose Fitting Tee 4mm X 4mm X 1/8"m

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG APD04-01
Weight: 0.02kg
Pack Dim: 44.00mm x 11.00mm x 11.00mm
UPC: 6009515848668

Price:

R 25.42

Ex VAT: R 22.10

Available Options

Stockist

AirCraft PU Hose Fitting Tee 4mm x 4mm x 1/8" BSP (SG APD04-01)

At a Glance; 4 mm tube tee with 1/8" BSP male thread for clean, compact air line branching

The AirCraft SG APD04-01 PU Hose Fitting Tee 4mm x 4mm x 1/8" BSP is a neat solution for building compact pneumatic layouts where you need both tubing and a threaded connection point. With two 4 mm push-in tube ports and a 1/8" BSP male thread, it makes it easy to branch a line and screw directly into compatible regulators, manifolds, valves or gauge blocks—keeping your air system tidy, efficient and easy to service.

Hybrid tee: push-in tubing plus 1/8" BSP thread

Instead of stacking multiple adaptors, this fitting combines tube-to-tube branching with a threaded port in one compact body. Fewer joins means a cleaner installation and fewer potential leak points in your compressed-air setup.

Extra Information

For use with 4 mm outside diameter pneumatic tubing (commonly PU/nylon).
The threaded end is 1/8" BSP male, commonly used on compact pneumatic components.
For best sealing, ensure tubing is cut square and clean, and seal threaded joints as required for your application.

Pro Tip

Support the fitting body while tightening the threaded end to avoid twisting the tube lines, then leak-test with soapy water after pressurising.

Features

Dual 4 mm push-in ports Quick-connect branching for 4 mm pneumatic tubing.
1/8" BSP male thread Screws into compatible ports on air accessories and control components.
Compact tee body Ideal for tight spaces on benches, panels and small pneumatic assemblies.
Service-friendly design Makes re-routing and maintenance simpler with less clutter.

Benefits

Cleaner air plumbing: Branch your 4 mm line and connect to a threaded port in one fitting.
Faster installs: Push-in tube connections reduce assembly time and downtime.
Reduced leak risk: Fewer adaptors and unnecessary joins mean fewer places for air loss.

Safety

Wear eye protection when working with pressurised air lines.
Depressurise the system before installing or removing pneumatic fittings.
Route tubing to avoid kinks, abrasion and snag points that can cause leaks or failure.
Do not exceed the rated limits of your compressor, regulator, hoses and fittings.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG APD04-01
Product Type	PU Hose Fitting Tee (Tube Tee with BSP Thread)
Tube Size	4 mm x 4 mm (OD)
Thread Size	1/8" BSP Male
Connection Type	Push-In Tube Ports + Threaded Port
Suitable Tubing	PU / Nylon Pneumatic Tube
Application	Compressed Air Line Branching & Equipment Connection