Aircraft Air Tools

Air Nailer 18g 10-32mm Brad Nail 100pc Cap. (f32)

Stock: In Stock Model: AT0001 UPC: 6009515812669

Air Nailer 18g 10-32mm Brad Nail 100pc Cap. (f32)

Pneumatic nail gun 18 Gauge The nail gun makes use of 18 Gauge thickness brad nails and it is mostly used in the cabinet making & trim carpentry industries to resemble panel pins. The nail gun is light in weight, with an ergonomically shaped handle that is easy to grip. A rubber bumper is fitted to protect the wood surface. The nail gun has added safety where it it will only drive-in a nail when the bumper is depressed against the wooden surface. Max length of nail: 32....

R 1,039.66

Ex VAT:R 904.05

Contact us

Stockist

Stock: In Stock Model: AT0001-SK01 UPC: 6009515851439

Air Stapler Service Kit Cyl. Cap & Exhaust Cover Kit (1-5) For At0001

AirCraft Air Stapler Service Kit – Cylinder Cap & Exhaust Cover Kit (For AT0001) (AT0001-SK01) At a Glance: Top-end service kit including cylinder cap and exhaust cover components to refresh sealing and exhaust function on AT0001 pneumatic staplers/nailers. If your pneumatic stapler starts leaking from the top, losing punch, or sounding “off” under load, the top-end components are often the culprits. The AirCraft AT0001-SK01 service kit is a practical cylinder cap and exhaust cover refresh....

R 151.23

Ex VAT:R 131.50

Contact us

Stockist

Stock: In Stock Model: AT0001-SK02 UPC: 6009515851446

Air Stapler Service Kit Gasket Piston & O-ring Kit (6-10/17/23) For At

AirCraft Air Stapler / Nailer Service Kit – Gaskets, Piston & O-Rings (18 Gauge) (AT0001-SK02) At a Glance: Complete seal and gasket service kit for AirCraft 18 gauge pneumatic nailers—restores sealing, power, and reliability. Air leaks and weak firing usually don’t mean your nail gun is finished—they often mean the seals are. The AirCraft AT0001-SK02 service kit is designed to refresh your pneumatic nailer’s internals with the key wear parts: gaskets, piston sealing components, and O-ring....

R 200.27

Ex VAT:R 174.15

Contact us

Stockist

Stock: In Stock Model: AT0001-SK03 UPC: 6009515851453

Air Stapler Service Kit Main Body (21/22) For At0001

AirCraft Air Stapler Service Kit – Main Body Components (For AT0001) (AT0001-SK03) At a Glance: Main body service kit for the AirCraft AT0001 pneumatic stapler/nailer—designed to restore internal function and reliability. When a pneumatic stapler starts losing efficiency, leaking air, or cycling inconsistently, the problem isn’t always just seals—sometimes the main body components need attention. The AirCraft AT0001-SK03 service kit is intended for main body servicing on the AT0001 tool platfo..

R 122.82

Ex VAT:R 106.80

Contact us

Stockist

Stock: In Stock Model: AT0001-SK04 UPC: 6009515851460

Air Stapler Service Kit Driver Collar Kit (11-16) For At0001

AirCraft Air Stapler Service Kit – Driver Collar Kit (For AT0001) (AT0001-SK04) At a Glance: Driver collar service kit for the AirCraft AT0001—helps restore driver guidance, alignment, and reliable fastening performance. When your pneumatic stapler starts misfiring, driving inconsistently, or showing signs of sloppy alignment, the driver collar area is often where the trouble begins. The AirCraft AT0001-SK04 driver collar kit is designed to service the driver collar components on the AT0001 to..

R 639.57

Ex VAT:R 556.15

Contact us

Stockist

Stock: In Stock Model: AT0001-SK05 UPC: 6009515851477

Air Stapler Service Kit Compl. Trigger Kit (24-34) For At0001

AirCraft Air Stapler Service Kit – Complete Trigger Kit (For AT0001) (AT0001-SK05) At a Glance: Complete trigger service kit for the AirCraft AT0001—refreshes trigger components for smoother actuation and more reliable firing. When a pneumatic stapler starts acting unpredictable—sticking, leaking around the trigger, or firing inconsistently—the trigger assembly is usually telling you it’s time for maintenance. The AirCraft AT0001-SK05 Complete Trigger Kit is designed for servicing the trigger ..

R 90.68

Ex VAT:R 78.85

Contact us

Stockist

Stock: In Stock Model: AT0001-SK06 UPC: 6009515851484

Air Stapler Service Kit Safety Tip Kit (35-39) For At0001

AirCraft Air Stapler Service Kit – Safety Tip Kit (For AT0001) (AT0001-SK06) At a Glance: Replacement contact safety (safety tip) components for the AirCraft AT0001—helps restore safe, correct tool activation. The contact safety tip is one of the most important parts of any pneumatic stapler/nailer—it’s what helps prevent the tool from firing unless it’s correctly pressed against the workpiece. If the safety tip becomes sticky, worn, bent, or unreliable, the tool can misfire, refuse to fire, o..

R 148.58

Ex VAT:R 129.20

Contact us

Stockist

Stock: In Stock Model: AT0001-SK07 UPC: 6009515851491

Air Stapler Service Kit Compl. Magazine Kit (42/45-52/55) For At0001

AirCraft Air Stapler Service Kit – Complete Magazine Kit (For AT0001) (AT0001-SK07) At a Glance: Complete magazine service kit to refresh the AT0001 feed system—ideal for fixing poor feeding, sticking followers, and frequent jams. When a pneumatic stapler/nailer starts jamming, double-feeding, or refusing to feed smoothly, the magazine assembly is often where the trouble lives. The AirCraft AT0001-SK07 Complete Magazine Kit is designed to service the AT0001 tool platform by replacing key magaz..

R 177.62

Ex VAT:R 154.45

Contact us

Stockist

Stock: In Stock Model: AT0001-SK08 UPC: 6009515851507

Air Stapler Service Kit Driver Guide & Spacer (53/54/56-60) For At0001

AirCraft Air Stapler Service Kit – Driver Guide & Spacer Kit (For AT0001) (AT0001-SK08) At a Glance: Driver guide and spacer kit for AT0001—helps keep the driver aligned to reduce misfires, bending fasteners, and jamming. A pneumatic stapler/nailer depends on one thing for consistent results: the driver must stay aligned, cycle smoothly, and strike cleanly every time. If the tool starts jamming, bending fasteners, or driving unevenly, worn driver guides and spacers are a common culprit. Th....

R 248.34

Ex VAT:R 215.95

Contact us

Stockist

Stock: In Stock Model: AT0001-SK09 UPC: 6009515851514

Air Stapler Service Kit Click Fixer (1/27/39-44) For At0001

AirCraft Air Stapler Service Kit – Click Fixer Kit (For AT0001) (AT0001-SK09) At a Glance: Click fixer (latch/catch) service kit for the AirCraft AT0001—designed to restore reliable locking, releasing, and smooth tool handling. On a pneumatic stapler/nailer, the small “click” parts do a big job—keeping components locked where they should be and releasing them when you need to reload or service the tool. If your AT0001 starts slipping, not latching properly, or the release action feels sticky o..

R 226.15

Ex VAT:R 196.65

Contact us

Stockist

Air Stapler Service Kit End Cap & Fitting (20-22) For At0001

Out Of Stock

Stock: Out Of Stock Model: AT0001-SK10 UPC: 6009515907198

Air Stapler Service Kit End Cap & Fitting (20-22) For At0001

AirCraft Air Stapler Service Kit – End Cap & Air Fitting Kit (For AT0001) (AT0001-SK10) At a Glance: Replacement end cap and air fitting components to restore rear sealing and a secure air connection on the AT0001. If your AT0001 stapler/nailer is leaking air from the rear, or the air inlet connection is starting to feel loose or unreliable, it’s time to service the end cap area. The AirCraft AT0001-SK10 End Cap & Fitting Kit is designed for the AT0001 tool platform and includes the ke....

R 226.15

Ex VAT:R 196.65

Contact us

Stockist

Stock: In Stock Model: AT0002 UPC: 6009515812676

Air Nailer 16g 15-50mm Brad Nail T50

Pneumatic nail gun 16 Gauge The nail gun makes use of 16 Gauge thickness brad nails and it is mostly used in the cabinet making & trim carpentry industries to resemble panel pins. The nail gun is light in weight, with an ergonomically shaped handle that is easy to grip. A rubber bumper is fitted to protect the wood surface. The nail gun has added safety where it it will only drive-in a nail when the bumper is depressed against the wooden surface. Max length of nail: 50....

R 2,088.57

Ex VAT:R 1,816.15

Contact us

Stockist

Stock: In Stock Model: AT0002-SK01 UPC: 6009515851521

Air Stapler Service Kit Cyl. Cap & Exhaust Cover Kit (1-5) For At0002

AirCraft Air Stapler Service Kit – Cyl. Cap & Exhaust Cover Kit (1–5) for AT0002 (AT0002-SK01) At a Glance: Genuine-fit cylinder cap & exhaust cover replacement kit for the AirCraft AT0002 air stapler, including fastening hardware. Bring your AT0002 back to crisp, reliable operation with the AirCraft AT0002-SK01 service kit. This kit replaces the cylinder cap and exhaust cover components that help the stapler seal properly and vent exhaust efficiently. Ideal for preventative maintena....

R 136.79

Ex VAT:R 118.95

Contact us

Stockist

Stock: In Stock Model: AT0002-SK02 UPC: 6009515851538

Air Stapler Service Kit (7-12/19-20) For At0002

AirCraft Air Stapler Service Kit (7–12 / 19–20) for AT0002 (AT0002-SK02) At a Glance: Internal service kit with multiple O-rings/seals and a spring to restore reliable operation on the AirCraft AT0002 air stapler. Keep your AirCraft AT0002 firing cleanly and consistently with the AT0002-SK02 service kit. This kit targets the internal wear items that quietly cause big problems over time—tired seals, flattened O-rings, and springs that don’t rebound like they used to. Replacing these component..

R 284.34

Ex VAT:R 247.25

Contact us

Stockist

Stock: In Stock Model: AT0002-SK03 UPC: 6009515851545

Air Stapler Service Kit Main Body (21-22) For At0002

AirCraft Air Stapler Service Kit – Main Body (21–22) for AT0002 (AT0002-SK03) At a Glance: Main body service kit for the AirCraft AT0002 air stapler (parts reference 21–22) to restore secure fitment and dependable performance. When a stapler starts losing its “tight and true” feel, the problem often lives in the main body area—wear, impact damage, or fatigue can cause misalignment, inconsistent cycling, or air loss around mating surfaces. The AirCraft AT0002-SK03 service kit is a direct-fit ..

R 680.97

Ex VAT:R 592.15

Contact us

Stockist

Stock: In Stock Model: AT0002-SK04 UPC: 6009515851552

Air Stapler Service Kit (13-17) For At0002

AirCraft Air Stapler Service Kit (13–17) for AT0002 (AT0002-SK04) At a Glance: Piston/driver and cylinder service components for the AirCraft AT0002—ideal for restoring consistent drive and smooth tool cycling. The heart of any air stapler is its moving “engine”: the piston/driver assembly working inside the cylinder. When these parts wear, you’ll often feel it immediately—sluggish cycling, inconsistent driving, or air not behaving the way it should. The AirCraft AT0002-SK04 service kit cove..

R 994.92

Ex VAT:R 865.15

Contact us

Stockist

Stock: In Stock Model: AT0002-SK05 UPC: 6009515851569

Air Stapler Service Kit Compl. Trigger Kit (24-34) For At0002

AirCraft Air Stapler Service Kit – Complete Trigger Kit (24–34) for AT0002 (AT0002-SK05) At a Glance: Complete trigger/valve service kit for the AirCraft AT0002, including trigger body components, pin, spring and seals for crisp, reliable firing. When an air stapler starts acting “temperamental” — delayed firing, inconsistent trigger response, or a small air hiss around the trigger area — the trigger valve assembly is usually the culprit. The AirCraft AT0002-SK05 complete trigger kit replace..

R 99.53

Ex VAT:R 86.55

Contact us

Stockist

Stock: In Stock Model: AT0002-SK06 UPC: 6009515851576

Air Stapler Service Kit (35-39) For At0002

AirCraft Air Stapler Service Kit (35–39) for AT0002 (AT0002-SK06) At a Glance: Magazine/feeder service components for the AirCraft AT0002, including bracket/hardware and spring parts to keep staples advancing smoothly. A stapler can have plenty of air power and still let you down if the magazine doesn’t feed properly. The AirCraft AT0002-SK06 service kit focuses on parts 35–39 for the AT0002—those practical, hard-working magazine and feeder components that guide, tension and advance staples ..

R 129.38

Ex VAT:R 112.50

Contact us

Stockist

Stock: In Stock Model: AT0002-SK07 UPC: 6009515851583

Air Stapler Service Kit Comp. Magazine Kit (42/45-52) For At0002

AirCraft Air Stapler Service Kit – Complete Magazine Kit (42 / 45–52) for AT0002 (AT0002-SK07) At a Glance: Complete magazine service kit for the AirCraft AT0002, including magazine body sections, feed springs and essential hardware for reliable staple feeding. If your AT0002 is starting to misfeed, jam, or feel rough when loading staples, the magazine assembly is the first place to look. The AirCraft AT0002-SK07 complete magazine kit replaces the core magazine components (reference 42 and 4..

R 174.17

Ex VAT:R 151.45

Contact us

Stockist

Stock: In Stock Model: AT0002-SK08 UPC: 6009515851590

Air Stapler Service Kit Driver Guide & Spacer (1-2/40-44) For At0002

AirCraft Air Stapler Service Kit – Driver Guide & Spacer (1–2 / 40–44) for AT0002 (AT0002-SK08) At a Glance: Driver guide and spacer service kit for the AirCraft AT0002, including guide plates, spacer and fasteners to keep the driver aligned. When a stapler starts bending staples, misdriving, or jamming more often than it should, the driver guide area is a prime suspect. The AirCraft AT0002-SK08 service kit replaces the driver guide and spacer components (reference 1–2 and 40–44) that ke....

R 503.93

Ex VAT:R 438.20

Contact us

Stockist

Stock: In Stock Model: AT0002-SK09 UPC: 6009515851606

Air Stapler Service Kit Click Fixer (27/53-58) For At0002

AirCraft Air Stapler Service Kit – Click Fixer (27 / 53–58) for AT0002 (AT0002-SK09) At a Glance: Click fixer and related hardware kit for the AirCraft AT0002, including bracket, lever piece, spring and fasteners for secure, reliable action. The “click fixer” components are the small parts that make a stapler feel solid and predictable—locking, returning and locating parts in the right position through repeated use. If your AT0002 has started feeling loose, not clicking/returning properly, o..

R 253.92

Ex VAT:R 220.80

Contact us

Stockist

Stock: In Stock Model: AT0003 UPC: 6009515812683

Air Impact Wrench 1/2" Single Hammer

Impact wrench 1/2" Drive The impact wrench is used to deliver high torque to either loosen or tighten projects in many industries from automotive repair to heavy equipment maintenance. In operation, a single hammer is accelerated by the motor to make contact with the 1/2" output shaft to deliver high impact torque as much as 310 Newton-Meter. A compressor is required with an air flow delivery of at least 228 l/min at 6.3 Bar to make use of the impact wrench. Make sure ..

R 1,162.13

Ex VAT:R 1,010.55

Contact us

Stockist

Stock: In Stock Model: AT0003-SK01 UPC: 6009515852580

Air Imp. Wrench Service Kit Bearings & Washer (4/5/7/10/27/35/42/43) F

AirCraft Air Impact Wrench Service Kit – Bearings & Washer (4, 5, 7, 10, 27, 35, 42, 43) for AT0003 (AT0003-SK01) At a Glance: Service kit with bearings, washers/seals and small hardware to refresh the AT0003’s rotating support .s and reduce wear-related play. When an impact wrench starts feeling rough, noisy, or develops unwanted play, worn bearings and washers are often the silent troublemakers. The AirCraft AT0003-SK01 service kit focuses on the bearing and washer components (parts re....

R 47.84

Ex VAT:R 41.60

Contact us

Stockist

Stock: In Stock Model: AT0003-SK02 UPC: 6009515852597

Air Imp. Wrench Service Kit Air Flow Reg (8/10-12) For At0003

AirCraft Air Impact Wrench Service Kit – Air Flow Regulator (8 / 10–12) for AT0003 (AT0003-SK02) At a Glance: Air flow regulator service kit for the AirCraft AT0003 to restore controllable power output and dependable air control. When an impact wrench loses its “feel” — power that surges, a regulator that won’t hold setting, or air leaking around the control area — the air flow regulator components are usually worn or contaminated. The AirCraft AT0003-SK02 service kit replaces the key air co..

R 15.53

Ex VAT:R 13.50

Contact us

Stockist

Stock: In Stock Model: AT0003-SK03 UPC: 6009515852603

Air Imp. Wrench Service Kit Air Inlet (5-9) For At0003

AirCraft Air Impact Wrench Service Kit – Air Inlet (5–9) for AT0003 (AT0003-SK03) At a Glance: Air inlet service kit for the AirCraft AT0003, including inlet fitting components, spring and ball/valve parts to keep air delivery clean and leak-free. If your impact wrench is struggling for power, hissing at the inlet, or feeling inconsistent under load, the air inlet assembly is a likely culprit. The AirCraft AT0003-SK03 service kit replaces the key inlet components (parts 5–9) that control and..

R 24.67

Ex VAT:R 21.45

Contact us

Stockist

Stock: In Stock Model: AT0003-SK04 UPC: 6009515852610

Air Imp. Wrench Service Kit Valve Kit(2-4/19/20) For At0003

AirCraft Air Impact Wrench Service Kit – Valve Kit (2–4 / 19–20) for AT0003 (AT0003-SK04) At a Glance: Valve service kit for the AirCraft AT0003 including key valve components, seal ring and mounting hardware to restore crisp air control. If your AT0003 has started to feel inconsistent — delayed spool-up, power that comes and goes, or air leaking around the control area — the internal valve assembly is often the root cause. The AirCraft AT0003-SK04 valve kit replaces critical valve component..

R 67.10

Ex VAT:R 58.35

Contact us

Stockist

Stock: In Stock Model: AT0003-SK05 UPC: 6009515852627

Air Imp. Wrench Service Kit Trigger Comp. (13-14) For At0003

AirCraft Air Impact Wrench Service Kit – Trigger Complete (13–14) for AT0003 (AT0003-SK05) At a Glance: Complete trigger replacement kit for the AirCraft AT0003, including trigger lever and pin to restore crisp, dependable control. A trigger that feels sticky, sloppy or inconsistent can make an impact wrench frustrating (and unsafe) to use. The AirCraft AT0003-SK05 trigger complete service kit replaces the key trigger components (parts 13–14) that you rely on every time you squeeze for power..

R 35.08

Ex VAT:R 30.50

Contact us

Stockist

Stock: In Stock Model: AT0003-SK06 UPC: 6009515852634

Air Imp. Wrench Service Kit Oil Inlet (15-18) For At0003

AirCraft Air Impact Wrench Service Kit – Oil Inlet (15–18) for AT0003 (AT0003-SK06) At a Glance: Oil inlet/lubrication service kit for the AirCraft AT0003, including oil plug/inlet components and spring-loaded parts to support proper internal lubrication. Pneumatic impacts work hard, and they rely on one quiet hero to survive the long haul: lubrication. If the oil inlet components are worn, leaking, or not feeding properly, internal parts run drier, hotter and wear faster. The AirCraft AT000..

R 40.71

Ex VAT:R 35.40

Contact us

Stockist

Stock: In Stock Model: AT0003-SK07 UPC: 6009515852641

Air Imp. Wrench Service Kit Rear Cover & Scuff (35-40) For At0003

AirCraft Air Impact Wrench Service Kit – Rear Cover & Scuff (35–40) for AT0003 (AT0003-SK07) At a Glance: Rear cover and protective scuff/bumper service kit for the AirCraft AT0003, including rear cover, gasket/seal and mounting screws for a proper refit. The rear cover does more than close off the back of the tool—it helps protect internal components, supports correct sealing, and keeps dust and workshop grime where it belongs (outside). The AirCraft AT0003-SK07 service kit replaces the....

R 34.44

Ex VAT:R 29.95

Contact us

Stockist

Stock: In Stock Model: AT0003-SK08 UPC: 6009515852658

Air Imp. Wrench Service Kit Rotor Kit (28/29/31-34) For At0003

AirCraft Air Impact Wrench Service Kit – Rotor Kit (28 / 29 / 31–34) for AT0003 (AT0003-SK08) At a Glance: Air motor rotor service kit for the AirCraft AT0003, including rotor assembly components and motor plates/housing parts for a full motor refresh. When an impact wrench starts losing punch, running unevenly, or sounding rough, the air motor is usually telling you it’s tired. The rotor assembly sits at the centre of that motor, and when wear sets in, performance drops fast. The AirCraft A..

R 163.42

Ex VAT:R 142.10

Contact us

Stockist

Stock: In Stock Model: AT0003-SK09 UPC: 6009515852665

Air Imp. Wrench Service Kit Hammer & Anvil (21-26/42) For At0003

AirCraft Air Impact Wrench Service Kit – Hammer & Anvil (21–26 / 42) for AT0003 (AT0003-SK09) At a Glance: Hammer and anvil service kit for the AirCraft AT0003, including the impact mechanism assembly components to restore proper striking action. The hammer and anvil set is where an impact wrench earns its keep. When these parts wear, the tool may still spin, but it won’t hit like it should—resulting in weak breakaway, inconsistent torque, or harsh, uneven impacts. The AirCraft AT0003-SK....

R 226.03

Ex VAT:R 196.55

Contact us

Stockist

Stock: In Stock Model: AT0003-SK10 UPC: 6009515860264

Air Imp. Wrench Service Kit Rotor Blades Set 6pc (30) For At0003

AirCraft Air Impact Wrench Service Kit – Rotor Blades Set (6pc) (30) for AT0003 (AT0003-SK10) At a Glance: 6-piece rotor blade (vane) set for the AirCraft AT0003 air motor to refresh the motor’s sealing surfaces and restore performance. Rotor blades (also called vanes) are the working heart of an air motor. As they wear, the motor loses sealing efficiency—meaning slower spool-up, less power, and a tool that feels “tired” even with good air supply. The AirCraft AT0003-SK10 rotor blade set rep..

R 31.05

Ex VAT:R 27.00

Contact us

Stockist

Stock: In Stock Model: AT0003-SK11 UPC: 6009515860271

Air Imp. Wrench Service Kit Main Housing (1/41) For At0003

AirCraft Air Impact Wrench Service Kit – Main Housing (1 / 41) for AT0003 (AT0003-SK11) At a Glance: Main housing (body) replacement kit for the AirCraft AT0003, supplied with gasket plate to ensure proper sealing and correct assembly. The main housing is the backbone of your impact wrench—holding the air motor, valve system and impact mechanism in correct alignment while also protecting everything from knocks and workshop abuse. If the body is cracked, damaged, or the sealing face has been ..

R 31.05

Ex VAT:R 27.00

Contact us

Stockist

Stock: In Stock Model: AT0004 UPC: 6009515812720

Air Impact Wrench 1/2" Twin Hammer

Impact wrench 1/2" Drive The impact wrench is used to deliver high torque to either loosen or tighten projects in many industries from automotive repair to heavy equipment maintenance. In operation, a twin hammer is accelerated by the motor to make contact with the 1/2" output shaft to deliver high impact torque as much as 567 Newton-Meter. A compressor is required with an air flow delivery of at least 291 l/min at 6.3 Bar to make use of the impact wrench. Make sure that a..

R 2,934.40

Ex VAT:R 2,551.65

Contact us

Stockist

Stock: In Stock Model: AT0004-SK01 UPC: 6009515856113

Air Imp. Wrench Service Kit Hammer Gasket & Washers (4/6/8/9/14/23/)

AirCraft Air Impact Wrench Service Kit – Hammer Gasket & Washers (4 / 6 / 8 / 9 / 14 / 23) for AT0004 (AT0004-SK01) At a Glance: Sealing and spacing service kit for the AirCraft AT0004 impact mechanism, including gaskets, washers and small retaining components for a tight, correct rebuild. Inside every impact wrench, the hammer mechanism needs correct spacing and reliable sealing to deliver consistent power. If gaskets flatten, washers wear, or small retaining parts are missing, the tool....

R 310.21

Ex VAT:R 269.75

Contact us

Stockist

Stock: In Stock Model: AT0004-SK02 UPC: 6009515856120

Air Imp. Wrench Service Kit Hammer Case Comp. (1-3/5/7) For At0004

AirCraft Air Impact Wrench Service Kit – Hammer Case Complete (1–3 / 5 / 7) for AT0004 (AT0004-SK02) At a Glance: Complete hammer case service kit for the AirCraft AT0004 including hammer case/housing, large sealing ring, screws and retaining clips for a solid rebuild. The hammer case is the tough outer shell that holds and protects the impact mechanism—taking the knocks, containing the grease, and keeping everything aligned so the hammer can strike properly. If the case is cracked, worn, or..

R 490.99

Ex VAT:R 426.95

Contact us

Stockist

Stock: In Stock Model: AT0004-SK03 UPC: 6009515856137

Air Imp. Wrench Service Kit Bearings (15/22) For At0004

AirCraft Air Impact Wrench Service Kit – Bearings (15 & 22) for AT0004 (AT0004-SK03) At a Glance: Bearing replacement kit for the AirCraft AT0004, supplying the two key bearings (reference 15 and 22) that support smooth, stable rotation. Bearings are the silent workhorses inside an impact wrench. When they start to wear, you’ll often notice extra noise, vibration, rough running or a tool that just doesn’t feel as smooth under load. The AirCraft AT0004-SK03 bearing service kit replaces th....

R 387.67

Ex VAT:R 337.10

Contact us

Stockist

Stock: In Stock Model: AT0004-SK04 UPC: 6009515856144

Air Imp. Wrench Service Kit Hammer Frame & Bushing (10-13) For At000

AirCraft Air Impact Wrench Service Kit – Hammer Frame & Bushing (10–13) for AT0004 (AT0004-SK04) At a Glance: Impact mechanism support kit for the AirCraft AT0004, including hammer frame components, bushing and pins to keep the hammer assembly running true. The hammer frame is the “skeleton” that supports the impact mechanism inside your wrench. It keeps the hammer components aligned, guides movement, and ensures the impact energy transfers cleanly to the drive. When the frame or bushing....

R 1,473.15

Ex VAT:R 1,281.00

Contact us

Stockist

Stock: In Stock Model: AT0004-SK05 UPC: 6009515856151

Air Imp. Wrench Service Kit Rotor & Cyl. (16/17/19-21/24) For At0004

AirCraft Air Impact Wrench Service Kit – Rotor & Cylinder (16 / 17 / 19–21 / 24) for AT0004 (AT0004-SK05) At a Glance: Air motor core rebuild kit for the AirCraft AT0004 including rotor and cylinder components to bring back smooth, efficient power delivery. When an impact wrench feels weak, slow to spool up, or rough under load, the air motor is often the culprit. The rotor and cylinder form the core of that motor—where air pressure is converted into rotation. If these surfaces are worn ....

R 2,183.74

Ex VAT:R 1,898.90

Contact us

Stockist

Stock: In Stock Model: AT0004-SK06 UPC: 6009515856168

Air Imp. Wrench Service Kit Housing & Valve (25-28/37/40) For At0004

AirCraft Air Impact Wrench Service Kit – Housing & Valve (25–28 / 37 / 40) for AT0004 (AT0004-SK06) At a Glance: Main housing and air-control valve service kit for the AirCraft AT0004, designed to restore sealing, fitment and smooth trigger/airflow control. The housing is the backbone of the tool—holding the motor, impact section and handle together—while the valve system controls airflow, direction and trigger response. If the housing is damaged, threads are stripped, or the valve parts....

R 1,808.95

Ex VAT:R 1,573.00

Contact us

Stockist

Stock: In Stock Model: AT0004-SK07 UPC: 6009515856175

Air Imp. Wrench Service Kit Reverse Valve (35/36/38/39) For At0004

AirCraft Air Impact Wrench Service Kit – Reverse Valve (35–36 / 38–39) for AT0004 (AT0004-SK07) At a Glance: Reverse valve service kit for the AirCraft AT0004 with springs and detent components to keep the forward/reverse selector crisp and leak-free. The reverse valve is what lets your impact wrench swap direction—forward to tighten, reverse to loosen—by rerouting airflow inside the motor. When the reverse valve components wear, the tool can feel vague when switching direction, slip out of ..

R 155.08

Ex VAT:R 134.85

Contact us

Stockist

Stock: In Stock Model: AT0004-SK08 UPC: 6009515856182

Air Imp. Wrench Service Kit Throttle & Valve Stem (29-34) For At0004

AirCraft Air Impact Wrench Service Kit – Throttle & Valve Stem (29–34) for AT0004 (AT0004-SK08) At a Glance: Throttle/trigger valve service kit for the AirCraft AT0004 including spring, valve seat/cap and sealing O-ring to restore smooth air control. The throttle valve is the “tap” that controls how much air enters your impact wrench when you pull the trigger. If the valve stem or seat is worn, or the spring and seals are tired, you can get air leaks, a sticky trigger feel, weak power de....

R 271.40

Ex VAT:R 236.00

Contact us

Stockist

Stock: In Stock Model: AT0004-SK09 UPC: 6009515860103

Air Imp. Wrench Service Kit Rotor Blades Only 6pc Set (18) For At0004

AirCraft Air Impact Wrench Service Kit – Rotor Blades Only 6pc Set (18) for AT0004 (AT0004-SK09) At a Glance: 6-piece rotor blade (vane) set for the AirCraft AT0004 air motor—an essential refresh for power, efficiency and smooth rotation. Rotor blades (also called vanes) are the wear items inside the air motor that create sealing and drive rotation as compressed air flows through the motor. Over time they can chip, wear short, or become sticky—leading to slow spin-up, reduced torque and roug..

R 151.92

Ex VAT:R 132.10

Contact us

Stockist

Stock: In Stock Model: AT0005 UPC: 6009515812706

Air Drill 10mm Reversable 1800rpm (3/8")

Reversible pneumatic drill The pneumatic drill is ideal for pilot hole drilling in a production line. The drill has non-variable speed set to 1800 rpm. A compressor is required with an air flow delivery of at least 106 l/min at 6.3 Bar to make use of the drill. Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).....

R 976.35

Ex VAT:R 849.00

Contact us

Stockist

Stock: In Stock Model: AT0005-31

Chuck 10mm 3/8 For Air Drill 10mm Reversable 1800rpm (1/2")

AirCraft Chuck 10mm (3/8") for Air Drill 10mm Reversible 1800rpm (AT0005-31) At a Glance: 10mm (3/8") replacement drill chuck for AirCraft 10mm reversible air drill—restores solid bit grip and smooth drilling control. A worn chuck turns a good air drill into a frustration machine—bits slip, wobble increases and accuracy goes out the window. The AirCraft AT0005-31 10mm (3/8") chuck is a replacement chuck for the AirCraft 10mm reversible 1800rpm air drill, designed to clamp securely and hold y..

R 207.12

Ex VAT:R 180.10

Contact us

Stockist

Stock: In Stock Model: AT0005-SK01 UPC: 6009515857370

Air Drill Service Kit O-rings & Seals (2/3/5/7/16/24) For At0005

AirCraft Air Drill Service Kit O-rings and Seals (2,3,5,7,16,24) for AT0005 (AT0005-SK01) At a Glance: Complete O-ring and seal refresh kit for the AirCraft AT0005 air drill—targets common leak .s and worn seals. When an air drill starts losing power, free-spinning, or hissing like a kettle, the culprit is often tired seals. The AirCraft AT0005-SK01 service kit supplies the O-rings and seals referenced as parts (2,3,5,7,16,24) for the AT0005 air drill, helping you restore proper sealing, con..

R 42.78

Ex VAT:R 37.20

Contact us

Stockist

Stock: In Stock Model: AT0005-SK02 UPC: 6009515857387

Air Drill Service Kit Bearings (17/29) For At0005

AirCraft Air Drill Service Kit Bearings (17,29) for AT0005 (AT0005-SK02) At a Glance: Bearing replacement kit for the AirCraft AT0005 air drill—helps eliminate rough running, excessive noise and vibration caused by worn bearings. Bearings are the quiet workhorses inside your air drill—until they wear, then everything gets louder, rougher and less precise. The AirCraft AT0005-SK02 service kit supplies the replacement bearings referenced as parts (17,29) for the AirCraft AT0005 air drill. Idea..

R 147.37

Ex VAT:R 128.15

Contact us

Stockist

Stock: In Stock Model: AT0005-SK03 UPC: 6009515857394

Air Drill Service Kit Trigger Comp. (4/6/8/9/10-12) For At0005

AirCraft Air Drill Service Kit Trigger Comp. (4,6,8,9,10-12) for AT0005 (AT0005-SK03) At a Glance: Trigger component service kit for the AirCraft AT0005 air drill—ideal for fixing sticky triggers, inconsistent throttle response or air leakage around the trigger/valve area. When an air drill starts acting moody—sticky trigger, uneven speed control, or a little hiss where it shouldn’t—there’s a good chance the trigger/valve parts are worn, dirty or damaged. The AirCraft AT0005-SK03 service kit..

R 63.37

Ex VAT:R 55.10

Contact us

Stockist

Stock: In Stock Model: AT0005-SK04 UPC: 6009515857400

Air Drill Service Kit Main Body Comp. (1/13-15/35) For At0005

AirCraft Air Drill Service Kit – Main Body Comp. (1/13-15/35) For AT0005 (AT0005-SK04) At a Glance: Main body component service kit for AirCraft AT0005 – refreshes housing/control-related parts referenced as 1/13-15/35. If your AirCraft AT0005 air drill has taken a few knocks, feels loose in the hand, or the controls and body parts are starting to look (and feel) tired, the AT0005-SK04 service kit is the smart fix. This Main Body Components kit targets the external and control-side parts of th..

R 295.32

Ex VAT:R 256.80

Contact us

Stockist

Stock: In Stock Model: AT0005-SK05 UPC: 6009515857417

Air Drill Service Kit Rotor & Cyl. (18/19/21-23) For At0005

AirCraft Air Drill Service Kit – Rotor & Cyl. (18/19/21-23) For AT0005 (AT0005-SK05) At a Glance: Rotor and cylinder service kit for AirCraft AT0005 – replaces parts 18/19/21-23 to restore smooth, consistent drill performance. When a pneumatic drill starts losing punch, running rough, or struggling to maintain speed, the usual suspects live in the motor group. The AirCraft AT0005-SK05 service kit is a targeted rotor & cylinder refresh designed for the AirCraft AT0005 air drill, covering co....

R 217.12

Ex VAT:R 188.80

Contact us

Stockist

South Africa's #1 Supplier of Power Tools Accessories

Inside Vermont Sales

Corporate Information

Legal Information

Store Display Concepts

Warranties offered

Filter

Our Catalogue

Air tools