Multi-Sharp Replacement 7mm Collet for MS2001 Drill Bit Sharpener

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: MS2021
Weight: 0.04kg
Pack Dim: 105.00mm x 205.00mm x 20.00mm
UPC: 6009515896249

Price:

R 17.94

Ex VAT: R 15.60

Available Options

Stockist

Multi-Sharp Replacement 7mm Collet for MS2001 Drill Bit Sharpener

At a Glance: Replacement 7mm collet spare part for the Multi-Sharp MS2001 Drill Bit Sharpener.

The Multi-Sharp MS2021 Replacement 7mm Collet is a genuine spare part for the Multi-Sharp MS2001 Drill Bit Sharpener. It is designed to replace a worn, damaged or missing 7mm collet component so the MS2001 sharpening system can continue to hold drill bits correctly during sharpening. For users who rely on the MS2001 to sharpen HSS, wood, flat wood, masonry and other compatible drill bits, keeping the correct collet components in good condition helps maintain accurate positioning, controlled sharpening and reliable results.

Replacement 7mm collet for continued MS2001 sharpening performance

This spare collet is intended for maintenance and repair of the Multi-Sharp MS2001 Drill Bit Sharpener. Replacing a worn or damaged collet helps keep the drill bit holding system complete and functional, making it a useful spare for workshops, DIY users, installers and maintenance teams who want to extend the useful life of their drill bit sharpener.

Product highlights

Designed for MS2001: Replacement 7mm collet spare part for the Multi-Sharp MS2001 Drill Bit Sharpener.
7mm collet size: Size-specific replacement component for the compatible MS2001 sharpening system.
Restores usability: Helps replace a worn, damaged or missing collet in the sharpening setup.
Supports accurate positioning: A correctly fitted collet helps hold the drill bit setup securely during sharpening.
Cost-effective maintenance: Replace the spare part instead of replacing the full sharpener where only the collet is required.
Workshop-friendly spare: Useful to keep on hand for regular MS2001 users.

Extra Information

This spare part is designed for the Multi-Sharp MS2001 Drill Bit Sharpener.
Check the existing sharpener carefully before ordering to confirm that the 7mm collet is the part required.
If other MS2001 components are worn or missing, inspect the 13mm collet, collet ring, drill setter, holder and collet nut as well.
Keep spare parts clean and free from grinding dust to help the sharpener operate smoothly.
Use only with the compatible Multi-Sharp MS2001 system.

Pro Tips

Before replacing the collet, clean the sharpener to remove fine metal dust and abrasive particles.
Inspect the collet nut and collet ring at the same time, as worn surrounding parts can also affect sharpening accuracy.
Keep the old part until the replacement has been fitted and tested, so you can compare orientation and placement.
Do not force the replacement collet into position. If it does not fit correctly, re-check the model compatibility and installation alignment.
Store small MS2001 spare parts together in a labelled packet or drawer to avoid losing them in the workshop.

How to Use

Make sure the MS2001 sharpener is not connected to a power drill before replacing any part.
Inspect the sharpener and identify the original 7mm collet that needs to be replaced.
Remove the worn, damaged or missing collet component according to the MS2001 sharpener instructions.
Clean the surrounding area to remove dust, debris and abrasive particles.
Fit the MS2021 replacement 7mm collet into the correct position.
Check that the collet is seated correctly and that the related holding components tighten and release as intended.
Reassemble the sharpener fully before use.
Test the sharpener gently on a suitable drill bit setup, using light pressure and correct operating technique.

Features

Replacement collet: Spare collet component for the compatible Multi-Sharp drill bit sharpener.
7mm size: Size-specific replacement part for the MS2001 sharpening system.
MS2001 compatibility: Designed for use with the Multi-Sharp MS2001 Drill Bit Sharpener.
Sharpening system spare part: Helps maintain the sharpener when the original collet is worn, damaged or misplaced.
Compact replacement item: Easy to store with other MS2001 spare parts and sharpening accessories.

Benefits

Extends sharpener life: Helps keep the MS2001 sharpener in service by replacing only the required collet component.
Maintains setup completeness: Useful when the original 7mm collet has been lost, damaged or has become difficult to use.
Improves sharpening reliability: A proper collet helps support consistent drill bit positioning during sharpening.
Saves money: A spare part replacement can be more economical than replacing the complete sharpening unit.
Convenient repair option: Ideal for users who want to maintain their existing Multi-Sharp sharpening system.

Application

Replacing the 7mm collet on the Multi-Sharp MS2001 Drill Bit Sharpener.
Maintenance of the MS2001 drill bit sharpening system.
Repairing a sharpener with a worn, damaged or missing 7mm collet component.
Workshop, DIY, installation and maintenance sharpening setups.
Keeping compatible Multi-Sharp sharpening accessories complete and ready for use.

Specifications

Description	Spec
Brand	Multi-Sharp
Cat No.	MS2021
UPC	6009515896249
Product Type	Replacement Collet
Product Description	Replacement 7mm Collet For MS2001
Compatible Sharpener	Multi-Sharp MS2001 Drill Bit Sharpener
Collet Size	7mm
Use Type	Replacement Part / Spare Part
Application	MS2001 Drill Bit Sharpener Maintenance And Repair
Suitable For	Replacing A Worn, Damaged Or Missing 7mm Collet Component
Category	Sharpening Accessory Spare Part
Sales Unit	Each