Rotor Blade For Air Ratchet Wrench

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: AT0016-14
Weight: 0.00kg
Pack Dim: 130.00mm x 80.00mm x 1.00mm

Price:

R 11.62

Ex VAT: R 10.10

Available Options

Stockist

AirCraft AT0016-14 Rotor Blade For Air Ratchet Wrench

At a Glance: Replacement rotor blade (vane) for the AirCraft AT0016 air ratchet—helps the motor seal correctly for stronger, smoother performance.

Rotor blades—also called vanes—are the parts that make a pneumatic motor “bite” into the air and turn it into rotation. The AirCraft AT0016-14 Rotor Blade is a replacement vane for the AirCraft Air Ratchet Wrench (AT0016 series). As vanes wear, chip, swell from moisture, or lose their crisp edges, the motor starts leaking internally, which shows up as power loss, uneven speed, or rough running. Replacing worn blades during a service or rebuild restores proper sealing against the cylinder wall so the tool runs smoother, responds faster and holds performance under load.

AirCraft motor vane replacement for efficient sealing and consistent power

Rotor blades slide in and out of the rotor slots as the motor spins, creating sealed chambers that drive rotation. Fresh blades improve efficiency and reduce friction—especially when paired with good lubrication and clean air supply.

Extra Information

Intended as a spare part for AirCraft Air Ratchet Wrench motor assemblies (AT0016 series).
Replace rotor blades if they are chipped, rounded, cracked, swollen, or if the tool has noticeable power loss.
Best practice: replace blades as a set where applicable and inspect the rotor and cylinder for scoring.
Keep blades clean and lightly oiled during installation to prevent sticking on first start-up.

Pro Tip

Before first run after replacing vanes, add a few drops of pneumatic tool oil into the air inlet and run the tool briefly at low pressure. It helps the blades seat properly and prevents dry start-up wear.

Features

AT0016-series compatibility Designed as a replacement rotor blade for the AirCraft Air Ratchet Wrench range.
Precision vane profile Helps maintain correct contact and sealing inside the motor cylinder.
Wear component for servicing Ideal for rebuilds and preventative maintenance.
Consistent sliding action Designed to move freely in rotor slots for stable motor performance.

Benefits

Restores performance: Better internal sealing helps bring back torque and consistent speed.
Smoother running: Fresh vanes reduce roughness and improve motor response.
Extends tool life: Reduces strain on the rotor and cylinder by improving efficiency and lubrication behaviour.

Safety

Disconnect the air supply and bleed remaining pressure before opening the motor housing.
Wear eye protection—small parts can release during disassembly.
Keep the motor internals clean; grit can damage new vanes quickly and reduce sealing efficiency.
Handle rotor blades carefully—chipping an edge during installation can affect performance.
After reassembly, test the tool at low pressure first to confirm smooth running before full operating pressure.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	AT0016-14
Product Type	Spare Part – Rotor Blade / Vane
Compatible Tool	AirCraft Air Ratchet Wrench (AT0016 series)
Function	Motor Sealing / Airflow Chamber Formation
Typical Material	Composite / Fibre Vane Material