Air Sander Service Kit Bearing/seat Comp.(42-46) For At0010

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: AT0010-SK04
Weight: 0.06kg
Pack Dim: 82.00mm x 62.00mm x 62.00mm
UPC: 6009515849405

Price:

R 85.33

Ex VAT: R 74.20

Available Options

Stockist

AirCraft AT0010 Air Sander Service Kit Bearing seat Comp. (42-46) For Air Sander Model AT0010

At a Glance: Bearing seat component kit (positions 42–46) including bearing and retaining hardware to restore smooth running on the AirCraft AT0010 air sander.

If your AirCraft AT0010 air sander starts to feel rough, noisy, or develops play in the rotating assembly, the bearing area is a prime suspect. The AT0010-SK04 service kit supplies the bearing seat components referenced as 42 to 46 on the AT0010 parts diagram (as pictured), including the bearing and retaining hardware. It’s a smart, targeted fix that helps bring back smooth rotation, correct alignment and consistent sanding results.

Standout feature: A matched bearing seat component kit for the AT0010—ideal for correcting vibration, play and “gritty” rotation caused by worn bearing parts.

Extra Information

Confirm the part numbers/locations using the AT0010 exploded parts diagram for reference positions 42 to 46.
Inspect the bearing bore and mating surfaces for scoring or dirt; contamination can shorten bearing life dramatically.
When fitting the circlip/retaining ring, ensure it seats fully in its groove—partial seating can cause failure during use.

Pro Tip

Press bearings in square and evenly—never hammer directly on the bearing. If you don’t have a press, use a suitable socket that contacts the correct bearing race.

Features

AT0010-specific fitment Designed for Air Sander Model AT0010 bearing seat assembly positions 42–46.
Bearing and seat hardware included Supplied with the bearing plus associated seat/retaining components shown in the image.
Retaining ring/circlip components Helps secure the bearing correctly for reliable service life.
Service-ready replacement set Ideal during rebuilds, especially when the tool has been exposed to dust and abrasive grit.

Benefits

Smoother operation Fresh bearing components help restore clean, free rotation and stable sanding action.
Reduced vibration and noise Worn bearing seats and retainers can cause chatter—this kit helps bring back a calmer run.
Improved accuracy Correct bearing alignment supports even sanding and better finish consistency.
Longer tool life Replacing worn bearing seat parts helps protect related moving components from damage.

Safety

Wear eye, ear and dust protection when using pneumatic sanders and when servicing rotating assemblies.
Disconnect the air supply and release all pressure before disassembly or bearing work.
Use the correct tools for circlips/retaining rings to prevent slips and injury.
Test-run the sander briefly at low load after assembly to confirm smooth, stable operation before returning to normal use.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	AT0010-SK04
Product Type	Air Sander Service Kit (Bearing Seat Components)
Compatible Model	Air Sander Model AT0010
Reference Positions	42 / 43 / 44 / 45 / 46
Kit Contents	Bearing seat components including bearing and retaining hardware (as pictured)
Application	Bearing area repair/refresh to restore smooth rotation and alignment