Search
Search Criteria
Products meeting the search criteria
Stock: 5
Model: TCMD0035QE-SK015
UPC: 6009515880606
Tork Craft Coolant Bottle With Cap (24/25) Stand Service Kit (TCMD0035QE-SK015)
At a Glance: Replacement coolant bottle and cap for the TCMD0035QE stand—diagram parts (24/25) for dependable coolant supply.
Coolant is the quiet workhorse of core drilling: it helps manage heat, improves cutting behaviour, and flushes slurry away from the cutting edge.
When the coolant bottle is cracked, missing, or the cap won’t seal, you lose flow consistency and end up with mess, heat and frus..
R 225.92
Ex VAT:R 196.45
Stock: 5
Model: TCMD0035QE-SK016
UPC: 6009515880613
Tork Craft Coolant Valve With Pipe & Coupling (26-28) Stand Service Kit (TCMD0035QE-SK016)
At a Glance: Replacement coolant valve assembly with pipe & coupling for the TCMD0035QE stand—diagram parts (26–28) for controlled coolant flow.
Proper coolant flow is what keeps core drilling from turning into a smoky, gritty mess. It helps cool the cutter, flush slurry, and maintain a smoother cut.
The Tork Craft TCMD0035QE-SK016 Coolant Valve With Pipe & Coupling Stand Ser....
R 249.55
Ex VAT:R 217.00
Stock: 5
Model: TCMD0035QE-SK017
UPC: 6009515880620
Tork Craft Coolant Bottle Bracket With Screw (29/30/66) Stand Service Kit (TCMD0035QE-SK017)
At a Glance: Replacement coolant bottle bracket with screw for the TCMD0035QE stand—diagram parts (29/30/66) to keep the reservoir secure and correctly positioned.
A coolant bottle that isn’t mounted properly can cause all sorts of drama—leaks, awkward hose routing, and a coolant feed that keeps letting you down.
The Tork Craft TCMD0035QE-SK017 Coolant Bottle Bracket With Screw Stand S..
R 171.28
Ex VAT:R 148.94
Stock: 5
Model: TCMD0035QE-SK018
UPC: 6009515884123
Tork Craft Replacement Handle (6-9) Stand Service Kit (TCMD0035QE-SK018)
At a Glance: Replacement feed handle kit for the TCMD0035QE stand—diagram parts (6–9) for smooth, controlled drilling feed.
The feed handle is the part you trust with your accuracy. If it’s bent, cracked, loose, or slipping, the whole drilling experience becomes a wrestle.
The Tork Craft TCMD0035QE-SK018 Replacement Handle Stand Service Kit replaces the handle components referenced as parts (6–9),
re..
R 635.67
Ex VAT:R 552.76
Stock: 5
Model: TCMD0035QE-SK019
UPC: 6009515884130
Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit (TCMD0035QE-SK019)
At a Glance: Replacement pinion shaft and key for the TCMD0035QE stand—diagram parts (10–13) to restore solid feed engagement and smooth travel.
The stand feed should feel direct: turn the handle, the head moves—smoothly and without surprises. When the pinion shaft or key wears, slips, or shears,
you can get dead spots, uneven engagement, clicking under load, or sloppy movement that makes accurate d....
R 585.48
Ex VAT:R 509.11
Stock: 5
Model: TCMD0035QE-SK020
UPC: 6009515887278
Tork Craft Top Mandrel Set (1-5) Stand Service Kit (TCMD0035QE-SK020)
At a Glance: Replacement top mandrel set for the TCMD0035QE stand—diagram parts (1–5) to restore alignment and smooth stand operation.
On a mag base core drill stand, alignment is everything. If the upper mandrel area is worn or damaged, you’ll often feel it immediately—rough travel,
inconsistent feed, unwanted play, and a stand that just doesn’t feel “tight” anymore.
The Tork Craft TCMD0035QE-SK020 Top..
R 205.25
Ex VAT:R 178.48
Stock: 5
Model: TCMD0035QE-SK021
UPC: 6009515887285
Tork Craft Gear, Bearing & Housing Set Complete (14-23) Stand Service Kit (TCMD0035QE-SK021)
At a Glance: Complete gear, bearing and housing replacement set for the TCMD0035QE stand—diagram parts (14–23) to restore smooth, stable feed operation.
When a stand feed starts feeling rough, noisy or sloppy, it’s usually not one tiny part—it’s the whole drive group telling you it’s worn.
The Tork Craft TCMD0035QE-SK021 Gear, Bearing & Housing Set Complete Stand Service Kit re....
R 1,175.37
Ex VAT:R 1,022.06
Stock: 2
Model: TCMD0035QE-SK022
UPC: 6009515887292
Tork Craft Auto Feed Motor Complete Set (31-38) Stand Service Kit (TCMD0035QE-SK022)
At a Glance: Replacement auto feed motor complete set for the TCMD0035QE stand—diagram parts (31–38) to restore powered feed performance and reliable drilling control.
Auto feed is all about control: steady pressure, consistent travel, and less operator fatigue—especially on longer drilling runs.
When the auto feed starts slipping, stalling, running intermittently, or making unhappy noises, it..
R 6,214.27
Ex VAT:R 5,403.71
Stock: 5
Model: TCMD0035QE-SK023
UPC: 6009515887308
Tork Craft Circuit Board With Clamp Ring (49/50) Stand Service Kit (TCMD0035QE-SK023)
At a Glance: Replacement circuit board with clamp ring for the TCMD0035QE—diagram parts (49/50) for reliable control and secure electronics mounting.
When a mag base core drill starts behaving unpredictably—cutting out, refusing to start, running inconsistently, or showing odd electrical symptoms—the issue often lives in the control electronics.
The Tork Craft TCMD0035QE-SK023 Circuit Board W..
R 5,512.88
Ex VAT:R 4,793.81
Stock: 6
Model: TCMD0035QE-SK024
UPC: 6009515887315
Tork Craft Replacement Fuse (62) Stand Service Kit (TCMD0035QE-SK024)
At a Glance: Genuine replacement fuse for the TCMD0035QE—diagram part (62) for circuit protection and power restoration.
A fuse is the tool’s “electrical bodyguard”: when something goes wrong, it takes the hit first to protect the rest of the system.
If your Tork Craft TCMD0035QE mag base core drill has lost power or refuses to start, a blown fuse is a common (and thankfully simple) culprit.
The TCMD003..
R 34.70
Ex VAT:R 30.17
Stock: 6
Model: TCMD0035QE-SK025
UPC: 6009515887322
Tork Craft Magnet & Motor Switch Set (61/63) Stand Service Kit (TCMD0035QE-SK025)
At a Glance: Replacement magnet and motor switch set for the TCMD0035QE—diagram parts (61/63) for reliable holding power and dependable start/stop control.
A mag base core drill has two “must-work-every-time” controls: the magnet (for secure holding) and the motor (for predictable drilling power).
If either switch becomes intermittent, sticky, or unreliable, the whole job turns into guesswork....
R 101.89
Ex VAT:R 88.60
Stock: 5
Model: TCMD0035SK06
UPC: 6009515880255
Tork Craft Gear & Shaft for Armature Complete (25-29) Motor Service Kit (TCMD0035SK06)
At a Glance: Replacement armature gear and shaft assembly for the TCMD0035 motor—diagram parts (25–29) to restore smooth drive and reliable drilling power.
When a mag base drill starts sounding gritty, losing torque, or developing nasty vibrations, the trouble often sits right where the power gets transferred:
the armature drive gear and shaft assembly.
The Tork Craft TCMD0035SK06 G....
R 705.81
Ex VAT:R 613.75
Stock: 3
Model: TCMD0035-SK01
UPC: 6009515880200
Tork Craft Gasket & Water Seal Compl. (1-9) Motor Service Kit (TCMD0035-SK01)
At a Glance: Complete gasket and water seal set for motor assembly parts (1-9) on TCMD0035 series mag base drills.
When coolant, swarf, and workshop grime start sneaking into places they shouldn’t, seals are usually the first suspects. The Tork Craft TCMD0035-SK01 Gasket & Water Seal Complete Motor Service Kit replaces the key sealing components referenced as parts (1–9) in the motor assembly—helping you ....
R 259.14
Ex VAT:R 225.34
Stock: 4
Model: TCMD0035-SK02
UPC: 6009515880217
Tork Craft Spindle & Key Set (10,13,16-18) Motor Service Kit (TCMD0035-SK02)
At a Glance: Replacement spindle and key set for motor assembly reference parts (10, 13, 16–18) on TCMD0035 series mag base drills.
The spindle is where the hard work gets handed over—turning motor power into reliable rotation under load. When a spindle or drive key starts wearing, you’ll often feel it as play, rough running, inconsistent drive, or premature wear on neighbouring components. The Tork Craft TCMD....
R 1,565.20
Ex VAT:R 1,361.04
Stock: 1
Model: TCMD0035-SK03
UPC: 6009515880224
Tork Craft Bearing Kit & Oil Ring (11, 14, 21) Motor Service Kit (TCMD0035-SK03)
At a Glance: Bearing kit and oil ring components for motor assembly reference parts (11, 14, 21) on TCMD0035 series mag base drills.
Bearings are the quiet heroes of any power tool—until they aren’t quiet anymore. If your mag base drill starts sounding rough, feeling gritty, or showing extra vibration under load, tired bearings are often the culprit. The Tork Craft TCMD0035-SK03 Bearing Kit & Oil Ring ....
R 267.26
Ex VAT:R 232.40
Stock: 2
Model: TCMD0035-SK04
UPC: 6009515880231
GEARBOX WITH SCREWS (12/24) MOTOR SERVICE KIT....
R 795.89
Ex VAT:R 692.08
Stock: 3
Model: TCMD0035-SK05
UPC: 6009515880248
Tork Craft Gear & Gear Cover (15, 19, 20) Motor Service Kit (TCMD0035-SK05)
At a Glance: Replacement gear and gear cover components for motor assembly reference parts (15, 19, 20) on TCMD0035 series mag base drills.
When your mag base drill starts sounding harsher than usual, or the drive feels inconsistent under load, the gear train is often where the story is written. Worn gear teeth and tired cover components can lead to noisy engagement, uneven power transfer, and accelerated wear.....
R 712.46
Ex VAT:R 619.53
Stock: 4
Model: TCMD0035-SK07
UPC: 6009515880262
Tork Craft Dove Tail Block With Screw (22, 23) Motor Service Kit (TCMD0035-SK07)
At a Glance: Replacement dove tail block and screw for motor assembly reference parts (22, 23) on TCMD0035 series mag base drills.
A mag base drill is only as accurate as the parts that keep everything aligned and locked in place. If the sliding action feels sloppy, the assembly won’t hold adjustment, or you’re fighting unwanted movement under load, the dovetail block area is a likely culprit. The Tork Craft T..
R 122.56
Ex VAT:R 106.57
In Stock Soon
Stock: In Stock Soon
Model: TCMD0035-SK08
UPC: 6009515880279
Tork Craft Bearing Kit For Armature (30, 32) Motor Service Kit (TCMD0035-SK08)
At a Glance: Replacement armature bearing kit for motor assembly reference parts (30, 32) on TCMD0035 series mag base drills.
Armature bearings do more than “just spin” — they keep the motor’s rotating core centred, stable, and efficient. Once they start wearing, you’ll often notice a rough sound, extra vibration, heat build-up, or even brush wear that seems to appear out of nowhere. The Tork Craft TCMD0035-SK08..
R 243.64
Ex VAT:R 211.86
New Expected Date :
- 04/03/2026
Stock: 9
Model: TCMD0035-SK09
UPC: 6009515880286
Tork Craft Armature (31) Motor Service Kit (TCMD0035-SK09)
At a Glance: Replacement armature for motor assembly reference part (31) on TCMD0035 series mag base drills (QE/WO variants as specified).
The armature is the heart of the motor—the spinning core that turns electrical power into real drilling muscle. When an armature is burnt, shorted, scored, or running out of true, the tool can lose power, run rough, spark excessively at the brushes, or trip out under load. The Tork Craft TCMD003..
R 1,760.11
Ex VAT:R 1,530.53
Stock: 4
Model: TCMD0035-SK10
UPC: 6009515880293
Tork Craft Stator With Screws (34-37) Motor Service Kit (TCMD0035-SK10)
At a Glance: Replacement stator with screws for motor assembly reference parts (34–37) on TCMD0035 series mag base drills.
The stator is the motor’s powerhouse—the fixed windings that create the magnetic field the armature spins inside. When a stator is overheated, shorted, or contaminated, the tool can lose torque, run hot, trip out, or develop that unmistakable “electrical” smell. The Tork Craft TCMD0035-SK10 Stator ..
R 1,379.89
Ex VAT:R 1,199.90
Stock: 46
Model: TCMD0035-SK11
UPC: 6009515880309
Tork Craft Replacement Carbon Brush (41) Motor Service Kit (TCMD0035-SK11)
At a Glance: Replacement carbon brush for motor assembly reference part (41) on TCMD0035 series mag base drills.
Carbon brushes are the motor’s contact .—quietly transferring power to the spinning armature while you drill through steel like it owes you money. Over time they wear down, lose spring pressure, and can start causing heavy sparking, erratic speed, or that “weak motor” feeling under load. The Tork Craft TC..
R 110.75
Ex VAT:R 96.30
Stock: 39
Model: TCMD0035-SK12
UPC: 6009515880316
BRUSH HOLDER (40/42-44) MOTOR SERVICE KIT....
R 349.96
Ex VAT:R 304.31
Stock: 2
Model: TCMD0035-SK13
UPC: 6009515880323
Tork Craft Brush Holder (40, 42-44) Motor Service Kit (TCMD0035-SK12)
At a Glance: Replacement brush holder components for motor assembly reference parts (40, 42–44) on TCMD0035 series mag base drills.
Carbon brushes can only do their job properly if they’re held square, guided smoothly, and kept under consistent spring pressure. If the brush holder is cracked, worn, heat-damaged, or contaminated with carbon dust and grime, you can end up with erratic brush contact, heavy sparking, and fru..
R 110.01
Ex VAT:R 95.66
In Stock Soon
Stock: In Stock Soon
Model: TCMD0035-SK14
UPC: 6009515880330
Tork Craft Housing Kit Coml. (33, 38, 39, 45, 46, 48) Motor Service Kit (TCMD0035-SK14)
At a Glance: Complete housing component kit for motor assembly reference parts (33, 38, 39, 45, 46, 48) on TCMD0035 series mag base drills.
The motor housing does more than “hold things together” — it keeps everything aligned, protected, and properly seated so the motor can run smoothly under load. If housings are cracked, stripped, warped, or damaged by impact and heat, you can end up with vibration, p..
R 1,307.53
Ex VAT:R 1,136.98
New Expected Date :
- 04/03/2026
- 15/03/2026
Stock: 257
Model: TCMD1000
UPC: 6009515898434
Tork Craft Repl. Fuse Only 250V For Magbase Drills (TCMD1000)
At a Glance: Replacement fuse only, rated 250V, for Tork Craft mag base drills.
A fuse is the drill’s built-in “safety sacrifice”—it blows to protect the more expensive components when something goes wrong. If your mag base drill suddenly won’t power up after an overload, a jam, or an electrical surge, the fuse is one of the first things to check. The Tork Craft TCMD1000 Replacement Fuse (250V) is a direct replacement fuse only,..
R 5.75
Ex VAT:R 5.00
Showing 1 to 26 of 26 (1 Pages)
Information
No Search criteria specified