Search
Search Criteria
Products meeting the search criteria
Stock: 4
Model: TCDM0035PM-SK22
UPC: 6009515880408
Tork Craft Control Panel & Motor Switch (34/37/38) Stand Service Kit
At a Glance: Replacement control panel and motor switch components (parts 34, 37 and 38) for the Tork Craft TCDM0035PM stand
When a stand’s controls start acting up—intermittent switching, inconsistent starts, or a switch that feels “tired” and unpredictable—your entire setup becomes the weak link. The Tork Craft TCDM0035PM-SK22 Control Panel & Motor Switch service kit replaces the key control and switching compon....
R 679.97
Ex VAT:R 591.28
Stock: 4
Model: TCDM0035PM-SK23
UPC: 6009515880415
Tork Craft Repl. Handle (15-17) Stand Service Kit
At a Glance: Replacement handle components (parts 15–17) for the Tork Craft TCDM0035PM stand
The handle on a drill stand does more than just “move the head up and down” — it’s your control lever for precision, pressure and safety. If the handle is bent, loose, cracked, or missing parts, you lose smooth feed control and accuracy suffers fast. The Tork Craft TCDM0035PM-SK23 Repl. Handle stand service kit replaces the handle components (parts ..
R 511.65
Ex VAT:R 444.91
Stock: 5
Model: TCDM0035PM-SK24
UPC: 6009515880422
Tork Craft Pinion Shaft & Key (13/14) Stand Service Kit
At a Glance: Replacement pinion shaft and key components (parts 13 and 14) for the Tork Craft TCDM0035PM stand
If your stand suddenly feels sloppy, skips under load, or the feed action isn’t lifting and lowering smoothly, the pinion shaft area is a prime suspect. The Tork Craft TCDM0035PM-SK24 Pinion Shaft & Key stand service kit replaces the key drive components (parts 13 and 14) that transfer your handle input into controlle....
R 149.88
Ex VAT:R 130.33
Stock: 5
Model: TCDM0035PM-SK25
UPC: 6009515880439
Tork Craft Bearing & Gear Set (7-12) Stand Service Kit
At a Glance: Bearing and gear set service kit (parts 7–12) for smoother, more accurate movement on the Tork Craft TCDM0035PM stand
A drill stand should feel like a controlled machine, not a shopping trolley with attitude. If the feed action is rough, noisy, or developing side-play, the bearings and gears in the mechanism are often worn or contaminated. The Tork Craft TCDM0035PM-SK25 Bearing & Gear Set stand service kit replaces....
R 259.88
Ex VAT:R 225.98
Stock: 5
Model: TCDM0035PM-SK26
UPC: 6009515880446
Tork Craft Parameter & Control Panel (35/36/42) Stand Service Kit
At a Glance: Replacement parameter and control panel components (parts 35, 36 and 42) for the Tork Craft TCDM0035PM stand
When the control panel is damaged, unresponsive, or your stand’s settings stop behaving consistently, the whole setup becomes frustrating (and in some cases, unsafe). The Tork Craft TCDM0035PM-SK26 Parameter & Control Panel stand service kit replaces the panel-related components (parts 35, 36 and ....
R 307.13
Ex VAT:R 267.07
Stock: 5
Model: TCDM0035PM-SK27
UPC: 6009515880453
Tork Craft Panel & Gasket (32/33) Stand Service Kit
At a Glance: Replacement panel and gasket components (parts 32 and 33) for the Tork Craft TCDM0035PM stand
Dust, vibration and workshop life have a way of turning small gaps into big problems. If your stand’s panel is cracked, missing, or the gasket has flattened and stopped sealing properly, you’re inviting dust and debris into places that really don’t want it—especially around controls and wiring. The Tork Craft TCDM0035PM-SK27 Pane....
R 187.53
Ex VAT:R 163.07
Stock: 5
Model: TCMD0035PM-SK19
UPC: 6009515880378
Tork Craft Coolant Bottle With Cap (18/19) Stand Service Kit (TCMD0035PM-SK19)
At a Glance: Replacement coolant bottle and cap for the TCMD0035PM stand—diagram parts (18/19) for dependable coolant supply.
Coolant is the quiet workhorse of core drilling: it helps keep temperatures down, improves cutting behaviour, and flushes slurry away from the cutting edge.
When the coolant bottle is cracked, missing, or the cap won’t seal properly, you lose flow control and end up with mess..
R 98.93
Ex VAT:R 86.03
Stock: 4
Model: TCMD0035PM-SK20
UPC: 6009515880385
Tork Craft Coolant Valve With Pipe & Coupling (21/23/24) Stand Service Kit (TCMD0035PM-SK20)
At a Glance: Replacement coolant valve assembly with pipe & coupling for the TCMD0035PM stand—diagram parts (21/23/24) for controlled coolant flow.
Proper coolant flow is what keeps core drilling from turning into a smoky, gritty mess. It helps cool the cutter, flush slurry, and maintain a smoother cut.
The Tork Craft TCMD0035PM-SK20 Coolant Valve With Pipe & Coupling Stand....
R 212.64
Ex VAT:R 184.90
Stock: 5
Model: TCMD0035PM-SK21
UPC: 6009515880392
Tork Craft Coolant Bottle Bracket With Screw (20/22) Stand Service Kit (TCMD0035PM-SK21)
At a Glance: Replacement coolant bottle bracket with screw for the TCMD0035PM stand—diagram parts (20/22) to keep the reservoir secure and correctly positioned.
A coolant bottle that wobbles, sags, or can’t mount properly is a recipe for leaks, awkward hose routing, and a coolant feed that keeps letting you down.
The Tork Craft TCMD0035PM-SK21 Coolant Bottle Bracket With Screw Stand Servic..
R 174.24
Ex VAT:R 151.51
Stock: 4
Model: TCMD0035PM-SK22
UPC: 6009515888268
Tork Craft Electric Cord C/w Plugtop & Protector (27/28) Service Kit (TCMD0035PM-SK22)
At a Glance: Replacement electric cord with plugtop and protector for the TCMD0035PM—diagram parts (27/28) for safe, reliable power delivery.
A mag base core drill works hard, often in rough conditions and sometimes around coolant—so the power lead needs to be 100% trustworthy.
If your cord is nicked, crushed, stiff, or causing intermittent cut-outs when it moves, it’s time to replace it....
R 392.66
Ex VAT:R 341.44
Stock: 5
Model: TCMD0035SK06
UPC: 6009515880255
Tork Craft Gear & Shaft for Armature Complete (25-29) Motor Service Kit (TCMD0035SK06)
At a Glance: Replacement armature gear and shaft assembly for the TCMD0035 motor—diagram parts (25–29) to restore smooth drive and reliable drilling power.
When a mag base drill starts sounding gritty, losing torque, or developing nasty vibrations, the trouble often sits right where the power gets transferred:
the armature drive gear and shaft assembly.
The Tork Craft TCMD0035SK06 G....
R 705.81
Ex VAT:R 613.75
Stock: 3
Model: TCMD0035-SK01
UPC: 6009515880200
Tork Craft Gasket & Water Seal Compl. (1-9) Motor Service Kit (TCMD0035-SK01)
At a Glance: Complete gasket and water seal set for motor assembly parts (1-9) on TCMD0035 series mag base drills.
When coolant, swarf, and workshop grime start sneaking into places they shouldn’t, seals are usually the first suspects. The Tork Craft TCMD0035-SK01 Gasket & Water Seal Complete Motor Service Kit replaces the key sealing components referenced as parts (1–9) in the motor assembly—helping you ....
R 259.14
Ex VAT:R 225.34
Stock: 4
Model: TCMD0035-SK02
UPC: 6009515880217
Tork Craft Spindle & Key Set (10,13,16-18) Motor Service Kit (TCMD0035-SK02)
At a Glance: Replacement spindle and key set for motor assembly reference parts (10, 13, 16–18) on TCMD0035 series mag base drills.
The spindle is where the hard work gets handed over—turning motor power into reliable rotation under load. When a spindle or drive key starts wearing, you’ll often feel it as play, rough running, inconsistent drive, or premature wear on neighbouring components. The Tork Craft TCMD....
R 1,565.20
Ex VAT:R 1,361.04
Stock: 1
Model: TCMD0035-SK03
UPC: 6009515880224
Tork Craft Bearing Kit & Oil Ring (11, 14, 21) Motor Service Kit (TCMD0035-SK03)
At a Glance: Bearing kit and oil ring components for motor assembly reference parts (11, 14, 21) on TCMD0035 series mag base drills.
Bearings are the quiet heroes of any power tool—until they aren’t quiet anymore. If your mag base drill starts sounding rough, feeling gritty, or showing extra vibration under load, tired bearings are often the culprit. The Tork Craft TCMD0035-SK03 Bearing Kit & Oil Ring ....
R 267.26
Ex VAT:R 232.40
Stock: 2
Model: TCMD0035-SK04
UPC: 6009515880231
GEARBOX WITH SCREWS (12/24) MOTOR SERVICE KIT....
R 795.89
Ex VAT:R 692.08
Stock: 3
Model: TCMD0035-SK05
UPC: 6009515880248
Tork Craft Gear & Gear Cover (15, 19, 20) Motor Service Kit (TCMD0035-SK05)
At a Glance: Replacement gear and gear cover components for motor assembly reference parts (15, 19, 20) on TCMD0035 series mag base drills.
When your mag base drill starts sounding harsher than usual, or the drive feels inconsistent under load, the gear train is often where the story is written. Worn gear teeth and tired cover components can lead to noisy engagement, uneven power transfer, and accelerated wear.....
R 712.46
Ex VAT:R 619.53
Stock: 4
Model: TCMD0035-SK07
UPC: 6009515880262
Tork Craft Dove Tail Block With Screw (22, 23) Motor Service Kit (TCMD0035-SK07)
At a Glance: Replacement dove tail block and screw for motor assembly reference parts (22, 23) on TCMD0035 series mag base drills.
A mag base drill is only as accurate as the parts that keep everything aligned and locked in place. If the sliding action feels sloppy, the assembly won’t hold adjustment, or you’re fighting unwanted movement under load, the dovetail block area is a likely culprit. The Tork Craft T..
R 122.56
Ex VAT:R 106.57
In Stock Soon
Stock: In Stock Soon
Model: TCMD0035-SK08
UPC: 6009515880279
Tork Craft Bearing Kit For Armature (30, 32) Motor Service Kit (TCMD0035-SK08)
At a Glance: Replacement armature bearing kit for motor assembly reference parts (30, 32) on TCMD0035 series mag base drills.
Armature bearings do more than “just spin” — they keep the motor’s rotating core centred, stable, and efficient. Once they start wearing, you’ll often notice a rough sound, extra vibration, heat build-up, or even brush wear that seems to appear out of nowhere. The Tork Craft TCMD0035-SK08..
R 243.64
Ex VAT:R 211.86
New Expected Date :
- 04/03/2026
Stock: 9
Model: TCMD0035-SK09
UPC: 6009515880286
Tork Craft Armature (31) Motor Service Kit (TCMD0035-SK09)
At a Glance: Replacement armature for motor assembly reference part (31) on TCMD0035 series mag base drills (QE/WO variants as specified).
The armature is the heart of the motor—the spinning core that turns electrical power into real drilling muscle. When an armature is burnt, shorted, scored, or running out of true, the tool can lose power, run rough, spark excessively at the brushes, or trip out under load. The Tork Craft TCMD003..
R 1,760.11
Ex VAT:R 1,530.53
Stock: 4
Model: TCMD0035-SK10
UPC: 6009515880293
Tork Craft Stator With Screws (34-37) Motor Service Kit (TCMD0035-SK10)
At a Glance: Replacement stator with screws for motor assembly reference parts (34–37) on TCMD0035 series mag base drills.
The stator is the motor’s powerhouse—the fixed windings that create the magnetic field the armature spins inside. When a stator is overheated, shorted, or contaminated, the tool can lose torque, run hot, trip out, or develop that unmistakable “electrical” smell. The Tork Craft TCMD0035-SK10 Stator ..
R 1,379.89
Ex VAT:R 1,199.90
Stock: 46
Model: TCMD0035-SK11
UPC: 6009515880309
Tork Craft Replacement Carbon Brush (41) Motor Service Kit (TCMD0035-SK11)
At a Glance: Replacement carbon brush for motor assembly reference part (41) on TCMD0035 series mag base drills.
Carbon brushes are the motor’s contact .—quietly transferring power to the spinning armature while you drill through steel like it owes you money. Over time they wear down, lose spring pressure, and can start causing heavy sparking, erratic speed, or that “weak motor” feeling under load. The Tork Craft TC..
R 110.75
Ex VAT:R 96.30
Stock: 39
Model: TCMD0035-SK12
UPC: 6009515880316
BRUSH HOLDER (40/42-44) MOTOR SERVICE KIT....
R 349.96
Ex VAT:R 304.31
Stock: 2
Model: TCMD0035-SK13
UPC: 6009515880323
Tork Craft Brush Holder (40, 42-44) Motor Service Kit (TCMD0035-SK12)
At a Glance: Replacement brush holder components for motor assembly reference parts (40, 42–44) on TCMD0035 series mag base drills.
Carbon brushes can only do their job properly if they’re held square, guided smoothly, and kept under consistent spring pressure. If the brush holder is cracked, worn, heat-damaged, or contaminated with carbon dust and grime, you can end up with erratic brush contact, heavy sparking, and fru..
R 110.01
Ex VAT:R 95.66
In Stock Soon
Stock: In Stock Soon
Model: TCMD0035-SK14
UPC: 6009515880330
Tork Craft Housing Kit Coml. (33, 38, 39, 45, 46, 48) Motor Service Kit (TCMD0035-SK14)
At a Glance: Complete housing component kit for motor assembly reference parts (33, 38, 39, 45, 46, 48) on TCMD0035 series mag base drills.
The motor housing does more than “hold things together” — it keeps everything aligned, protected, and properly seated so the motor can run smoothly under load. If housings are cracked, stripped, warped, or damaged by impact and heat, you can end up with vibration, p..
R 1,307.53
Ex VAT:R 1,136.98
New Expected Date :
- 15/01/2026
- 04/03/2026
Stock: 4
Model: TCMD0035-SK15
UPC: 6009515880347
Tork Craft Repl. Handle (1-3) Stand Service Kit (TCMD0035-SK15)
At a Glance: Replacement handle set for stand assembly reference parts (1–3) on TCMD0035 series mag base drills.
The feed handle is where precision drilling becomes human-powered—every millimetre of control comes through that grip. If the handle is loose, bent, cracked, or the mounting parts have worn, you’ll feel it immediately as sloppy feeding, reduced accuracy, and unnecessary frustration. The Tork Craft TCMD0035-SK15 Repl..
R 1,677.41
Ex VAT:R 1,458.62
Stock: 5
Model: TCMD0035-SK16
UPC: 6009515880354
Tork Craft Pinion Shaft & Key (4, 5) Stand Service Kit (TCMD0035-SK16)
At a Glance: Replacement pinion shaft and key for stand assembly reference parts (4 and 5) on TCMD0035 series mag base drills.
On a mag base drill stand, the pinion shaft is the mechanical handshake between your feed handle and the drill’s vertical movement. When it wears, slips, or develops play, you’ll feel it as rough feeding, inconsistent engagement, or a “dead spot” when turning the handle. The Tork Craft TCMD0....
R 211.15
Ex VAT:R 183.61
Stock: 5
Model: TCMD0035-SK17
UPC: 6009515880361
Tork Craft Bearing & Gear Set (6-11) Stand Service Kit (TCMD0035-SK17)
At a Glance: Bearing and gear set for stand assembly reference parts (6–11) on TCMD0035 series mag base drills.
A mag base drill stand should feel solid, smooth, and predictable—because accuracy depends on it. If the feed action starts feeling rough, develops play, makes grinding noises, or skips under load, worn gears and tired bearings are often the root cause. The Tork Craft TCMD0035-SK17 Bearing & Gear Set r....
R 3,723.99
Ex VAT:R 3,238.25
Stock: 257
Model: TCMD1000
UPC: 6009515898434
Tork Craft Repl. Fuse Only 250V For Magbase Drills (TCMD1000)
At a Glance: Replacement fuse only, rated 250V, for Tork Craft mag base drills.
A fuse is the drill’s built-in “safety sacrifice”—it blows to protect the more expensive components when something goes wrong. If your mag base drill suddenly won’t power up after an overload, a jam, or an electrical surge, the fuse is one of the first things to check. The Tork Craft TCMD1000 Replacement Fuse (250V) is a direct replacement fuse only,..
R 5.75
Ex VAT:R 5.00
Showing 1 to 28 of 28 (1 Pages)
Information
No Search criteria specified