Search
Search Criteria
Products meeting the search criteria
Model: TCMD0035HD-SK14
UPC: 6009515880132
Tork Craft Coolant Valve With Pipe & Coupling (3/4/5) Stand Service Kit (TCMD0035HD-SK14)
At a Glance: Replacement coolant valve assembly with pipe & coupling for the TCMD0035HD stand—parts (3/4/5) for controlled coolant flow.
Core drilling without proper coolant flow is like sprinting with a plastic bag over your head—things get hot, ugly, and expensive very quickly.
The Tork Craft TCMD0035HD-SK14 Coolant Valve With Pi....
R 260.48
Ex VAT:R 226.50
Model: TCMD0035HD-SK15
UPC: 6009515880149
Tork Craft Bearing & Gear Set (18-23) Stand Service Kit (TCMD0035HD-SK15)
At a Glance: Replacement bearing & gear set for the TCMD0035HD stand (parts 18–23) to restore smooth feed and reliable stand drive performance.
When a mag base core drill stand starts feeling rough, noisy, or “notchy”, it’s often the bearings and gears telling you they’ve done their shift.
The Tork Craft TCMD0035HD-SK15 Bearing & Gear Set Stan....
R 471.50
Ex VAT:R 410.00
Model: TCMD0035HD-SK16
UPC: 6009515880156
Tork Craft Pinion Shaft & Key (24/25) Stand Service Kit (TCMD0035HD-SK16)
At a Glance: Replacement pinion shaft & key for the TCMD0035HD stand (parts 24/25) to restore solid feed engagement and smooth travel.
The feed on a core drill stand should feel confident and predictable—turn the handle, the head moves. No slipping, no “dead spots”, no crunchy surprises.
The Tork Craft TCMD0035HD-SK16 Pinion Shaft & Key Stand ....
R 360.53
Ex VAT:R 313.50
Model: TCMD0035HD-SK17
UPC: 6009515880163
Tork Craft Replacement Handle (26-28) Stand Service Kit (TCMD0035HD-SK17)
At a Glance: Replacement feed handle kit for the TCMD0035HD stand—diagram parts (26–28) for smooth, controlled drilling feed.
The handle is where your control lives. If it’s bent, cracked, slipping, or just plain uncomfortable, your drilling accuracy and safety take a knock.
The Tork Craft TCMD0035HD-SK17 Replacement Handle Stand Service Kit replaces the ..
R 533.60
Ex VAT:R 464.00
Model: TCMD0035HD-SK18
UPC: 6009515880170
Tork Craft Panel Plate With Screws (36/37/39/40/48) Stand Service Kit (TCMD0035HD-SK18)
At a Glance: Replacement panel plate with screws for the TCMD0035HD stand—diagram parts (36/37/39/40/48) for a secure, protected assembly.
A missing panel plate or stripped screws might look like a minor problem… right up until dust, slurry and workshop grit start finding their way into places they shouldn’t.
The Tork Craft TCMD0035HD-SK18 P..
R 721.63
Ex VAT:R 627.50
Model: TCMD0035HD-SK19
UPC: 6009515880187
Tork Craft Speed Control & Motor Switch (38/41-47) Stand Service Kit (TCMD0035HD-SK19)
At a Glance: Replacement speed control and motor switch components for the TCMD0035HD—diagram parts (38 and 41–47) for reliable control and consistent performance.
If your mag base core drill starts acting “possessed”—intermittent power, erratic speed, sticky switching, or sudden cut-outs—there’s a good chance the control components are the cu....
R 1,941.20
Ex VAT:R 1,688.00
Model: TCMD0035HD-SK20
UPC: 6009515880194
Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035HD-SK20)
At a Glance: Genuine replacement fuse for the TCMD0035HD—diagram part (44) for circuit protection and power restoration.
A fuse is a tiny component with one heroic job: sacrifice itself before something expensive does.
If your Tork Craft TCMD0035HD mag base core drill has lost power or keeps cutting out, a blown fuse is a common culprit.
The TCMD0035HD-SK..
R 36.34
Ex VAT:R 31.60
Model: TCMD0035WO-SK22
UPC: 6009515887360
Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035WO-SK22)
At a Glance: Genuine replacement fuse for the TCMD0035WO—diagram part (44) for circuit protection and power restoration.
A fuse is the tool’s built-in “circuit breaker”: when something goes wrong, it pops first to protect the electronics and wiring from more serious damage.
If your Tork Craft TCMD0035WO mag base drill has suddenly lost power or won’t start, a ..
R 36.34
Ex VAT:R 31.60
Model: TCMD0035-50HD-SK13
UPC: 6009515878047
Tork Craft Coolant Bottle With Cap (1/2) Stand Service Kit (TCMD0035-50HD-SK13)
At a Glance:; Replacement coolant bottle with cap for the TCMD0035-50HD—diagram parts (1/2) for cleaner, more reliable wet drilling.
Wet drilling is brilliant… right up until the coolant bottle starts leaking, the cap won’t seal, or the bottle gets damaged and you end up with more mess than cooling.
The Tork Craft TCMD0035-50HD-SK13 Coolant Bottle W..
R 103.27
Ex VAT:R 89.80
Model: TCMD0035-50HD-SK15
UPC: 6009515878061
Tork Craft Bearing & Gear Set (18-23) Stand Service Kit (TCMD0035-50HD-SK15)
At a Glance: Replacement bearing and gear set for the TCMD0035-50HD stand—diagram parts (18–23) to restore smooth feed and reliable engagement.
A mag base drill stand should feel solid and smooth: controlled feed, predictable engagement, and no “crunchy” surprises when you wind the handle.
When bearings wear or gears start to round off, you’ll noti....
R 471.50
Ex VAT:R 410.00
Model: TCMD0035-50HD-SK18
UPC: 6009515878092
Tork Craft Panel Plate With Screws (36/37/39/40/48) Stand Service Kit (TCMD0035-50HD-SK18)
At a Glance: Replacement panel plate with screws for the TCMD0035-50HD stand—diagram parts (36, 37, 39, 40 and 48) for secure mounting and proper protection.
The panel plate does two important jobs: it keeps the control area properly protected and it holds components in the correct position so everything lines up, fits neatly, and stays secure..
R 721.63
Ex VAT:R 627.50
Model: TCMD0035-50HD-SK19
UPC: 6009515878108
Tork Craft Speed Control & Motor Switch (38/41-47) Stand Service Kit (TCMD0035-50HD-SK19)
At a Glance: Replacement speed control and motor switch components for the TCMD0035-50HD—diagram parts (38 and 41–47) for stable control and dependable operation.
When speed control starts hunting, cutting out, or behaving unpredictably, it’s not just frustrating—it can ruin cutters, overload the motor, and make controlled drilling far hard....
R 1,941.20
Ex VAT:R 1,688.00
Model: TCMD0035-50HD-SK20
UPC: 6009515878115
Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035-50HD-SK20)
At a Glance: Genuine replacement fuse for the TCMD0035-50HD—diagram part (44) for circuit protection and power restoration.
A fuse is the tool’s built-in “circuit breaker”: it sacrifices itself to protect wiring and electronics when an overload or fault occurs.
If your Tork Craft TCMD0035-50HD suddenly won’t power up, cuts out unexpectedly, or shows no sign..
R 36.34
Ex VAT:R 31.60
Model: TCMD0035-55QE-SK020
UPC: 6009515878337
Tork Craft Top Mandrel Set (1-5) Stand Service Kit
At a Glance: Top mandrel component set (parts 1–5) for stand service and restoration
When a stand starts feeling “notchy”, develops side-play, or the feed action just doesn’t feel as precise as it used to, the top mandrel area is often where the gremlins live. The Tork Craft Top Mandrel Set (1-5) Stand Service Kit is a purpose-made spare parts set designed to replace the top mandrel components ..
R 214.48
Ex VAT:R 186.50
Model: TCMD0035-55QE-SK021
UPC: 6009515878344
Tork Craft Gear, Bearing & Housing Set Complete (14-23) Stand Service Kit (TCMD0035-55QE-SK021)
At a Glance: Replacement gear, bearing and housing set for the TCMD0035-55QE stand—diagram parts (14–23) to restore smooth feed, correct engagement and solid support.
When a mag base drill stand starts feeling rough, loose or noisy, the problem is often a combination of worn gears, tired bearings and a housing that no longer supports ....
R 1,225.33
Ex VAT:R 1,065.50
Model: TCMD0035-55QE-SK022
UPC: 6009515878351
Tork Craft Auto Feed Motor Complete Set (31-38) Stand Service Kit
At a Glance: Auto feed motor assembly replacement set (parts 31–38) for stand powered-feed servicing
Auto feed is one of those features you only truly appreciate when it stops behaving. If the powered feed becomes weak, erratic, noisy, or stops driving smoothly, the issue is often within the motor assembly and its related components. The Tork Craft Auto Feed Motor Complete Set (3..
R 6,478.53
Ex VAT:R 5,633.50
Model: TCMD0035-55QE-SK023
UPC: 6009515878368
Tork Craft Circuit Board with Clamp Ring (49 50) Stand Service Kit
At a Glance: Replacement circuit board and clamp ring set (parts 49 & 50) for stand electronic control servicing
When an electronic feed system starts acting haunted — cutting in and out, refusing to respond, running inconsistently, or behaving differently each time you power up — the culprit is often the control electronics rather than the mechanical parts. The Tork Craft C....
R 5,747.70
Ex VAT:R 4,998.00
Model: TCMD0035-55QE-SK024
UPC: 6009515878375
Tork Craft Replacement Fuse (62) Stand Service Kit
At a Glance: Replacement fuse (part 62) for stand electrical protection and reliable operation
A fuse is the tiny hero that sacrifices itself so the expensive electronics don’t have to. When the stand’s electrical system suddenly goes dead, won’t power up, or stops responding after a surge or overload, a blown fuse is often the first (and best) thing to check. The Tork Craft Replacement Fuse (6..
R 36.34
Ex VAT:R 31.60
Model: TCMD0035-SK15
UPC: 6009515880347
Tork Craft Repl. Handle (1-3) Stand Service Kit (TCMD0035-SK15)
At a Glance: Replacement handle set for stand assembly reference parts (1–3) on TCMD0035 series mag base drills.
The feed handle is where precision drilling becomes human-powered—every millimetre of control comes through that grip. If the handle is loose, bent, cracked, or the mounting parts have worn, you’ll feel it immediately as sloppy feeding, reduced accuracy, and unnecess..
R 1,749.15
Ex VAT:R 1,521.00
Model: TCMD0035-SK16
UPC: 6009515880354
Tork Craft Pinion Shaft & Key (4, 5) Stand Service Kit (TCMD0035-SK16)
At a Glance: Replacement pinion shaft and key for stand assembly reference parts (4 and 5) on TCMD0035 series mag base drills.
On a mag base drill stand, the pinion shaft is the mechanical handshake between your feed handle and the drill’s vertical movement. When it wears, slips, or develops play, you’ll feel it as rough feeding, inconsistent engagement, or a “dead s....
R 220.23
Ex VAT:R 191.50
Model: TCMD0035-SK17
UPC: 6009515880361
Tork Craft Bearing & Gear Set (6-11) Stand Service Kit (TCMD0035-SK17)
At a Glance: Bearing and gear set for stand assembly reference parts (6–11) on TCMD0035 series mag base drills.
A mag base drill stand should feel solid, smooth, and predictable—because accuracy depends on it. If the feed action starts feeling rough, develops play, makes grinding noises, or skips under load, worn gears and tired bearings are often the root cause. The....
R 3,882.40
Ex VAT:R 3,376.00
Model: TCMD0035-SK19
UPC: 6009515883746
Tork Craft Coolant Bottle With Cap (22, 23) Stand Service Kit (TCMD0035-SK19)
At a Glance: Replacement coolant bottle and cap for stand assembly reference parts (22 and 23) on TCMD0035 series mag base drills.
Coolant isn’t just about keeping things wet—it helps control heat, improves cutter life, and flushes swarf away so the cut stays clean. If the coolant bottle is cracked, leaking, missing its cap, or simply past its best, your drilling ..
R 103.27
Ex VAT:R 89.80
Model: TCMD0035-SK20
UPC: 6009515880903
Tork Craft Coolant Valve With Pipe & Coupling (25, 26, 27) Stand Service Kit (TCMD0035-SK20)
At a Glance: Replacement coolant valve with pipe and coupling for stand assembly reference parts (25, 26, 27) on TCMD0035 series mag base drills.
Controlled coolant flow is what keeps core drilling smooth, efficient, and kind to your cutters. If the valve is leaking, blocked, cracked, or the coupling isn’t sealing properly, coolant delivery beco....
R 217.35
Ex VAT:R 189.00
Model: TCMD0035-SK21
UPC: 6009515887353
Tork Craft Coolant Bottle Bracket With Screw (24, 28, 48) Stand Service Kit (TCMD0035-SK21)
At a Glance: Replacement coolant bottle bracket with screw for stand assembly reference parts (24, 28, 48) on TCMD0035 series mag base drills.
A coolant system is only as reliable as the parts holding it in place. If the bottle bracket is bent, cracked, missing hardware, or no longer clamps securely, the coolant bottle can shift, vibrate, and even le..
R 225.98
Ex VAT:R 196.50
Model: TCMD0068HD-SK15
UPC: 6009515877880
Tork Craft Coolant Bottle With Cap (52-54) Stand Service Kit (TCMD0068HD-SK15)
At a Glance: Replacement coolant bottle with cap for stand reference parts (52–54) on TCMD0068HD mag base drills.
A mag drill’s coolant system is the unsung hero of cleaner cuts, longer cutter life and less heat build-up. If the coolant bottle is cracked, leaking, stained with debris, or the cap no longer seals properly, coolant delivery becomes inconsistent—and ..
R 117.30
Ex VAT:R 102.00
Model: TCMD0068HD-SK16
UPC: 6009515877897
Tork Craft Coolant Valve With Pipe & Coupling (24, 55-57) Stand Service Kit (TCMD0068HD-SK16)
At a Glance: Replacement coolant valve with pipe and coupling for stand reference parts (24, 55–57) on TCMD0068HD mag base drills.
Coolant flow isn’t just about keeping things wet—it’s about controlling heat, improving chip evacuation and extending cutter life. If the coolant valve is sticking, leaking, blocked or the connections are damaged, f....
R 334.08
Ex VAT:R 290.50
Model: TCMD0068HD-SK17
UPC: 6009515877903
Tork Craft Bearing & Gear Set (11-16) Stand Service Kit (TCMD0068HD-SK17)
At a Glance: Replacement bearing and gear set for stand reference parts (11–16) on TCMD0068HD mag base drills.
A mag drill stand needs smooth, controlled movement to keep drilling accurate and safe. When bearings wear or gears develop play, the stand can feel rough, sloppy or inconsistent—leading to uneven feed, chatter and extra stress on cutters. The Tork Craft ....
R 487.60
Ex VAT:R 424.00
Model: TCMD0068HD-SK18
UPC: 6009515877910
Tork Craft Pinion Shaft & Key (17, 18) Stand Service Kit (TCMD0068HD-SK18)
At a Glance: Replacement pinion shaft and key for stand reference parts (17 and 18) on TCMD0068HD mag base drills.
The pinion shaft is the heart of the stand’s feed mechanism—translating your handle movement into smooth, controlled travel along the rail. If the pinion shaft or key is worn, damaged, or has developed play, the feed can feel sloppy, uneven, or prone....
R 396.18
Ex VAT:R 344.50
Model: TCMD0068HD-SK19
UPC: 6009515877927
Tork Craft Repl. Handle (19-22) Stand Service Kit (TCMD0068HD-SK19)
At a Glance: Replacement handle components for stand reference parts (19–22) on TCMD0068HD mag base drills.
The feed handle is where you and the machine meet. If the handle is bent, cracked, slipping, or loose, you lose control—making drilling less accurate and a lot less safe. The Tork Craft TCMD0068HD-SK19 Replacement Handle Stand Service Kit replaces the handle component..
R 771.65
Ex VAT:R 671.00
Model: TCMD0068HD-SK20
UPC: 6009515877934
Tork Craft Panel Plate With Screws (32, 37, 38) Stand Service Kit (TCMD0068HD-SK20)
At a Glance: Replacement panel plate supplied with screws for stand reference parts (32, 37 and 38) on TCMD0068HD mag base drills.
That panel plate might look like a simple cover, but it plays an important role in keeping assemblies secure, aligned and protected from workshop grime. If the plate is bent, cracked, missing, or the screws have stripped, you can..
R 930.93
Ex VAT:R 809.50
Model: TCMD0068HD-SK21
UPC: 6009515877941
Tork Craft Speed Control & Circuit Board (33-36) Stand Service Kit (TCMD0068HD-SK21)
At a Glance: Replacement speed control and circuit board components for stand reference parts (33–36) on TCMD0068HD mag base drills.
When a mag drill starts acting haunted—surging, losing power, refusing to hold speed, or cutting out under load—the culprit is often in the control electronics. The speed control and circuit board manage how power is deliv....
R 1,509.38
Ex VAT:R 1,312.50
Model: TCMD0068HD-SK22
UPC: 6009515877958
Tork Craft Speed & Motor Switch (39-41) Stand Service Kit (TCMD0068HD-SK22)
At a Glance: Replacement speed and motor switch components for stand reference parts (39–41) on TCMD0068HD mag base drills.
Switching is the drill’s “command centre”—if the speed selector or motor switch starts failing, you can get intermittent power, dead starts, cut-outs under load, or controls that feel loose and unreliable. The Tork Craft TCMD0068HD-SK22 Spe....
R 500.83
Ex VAT:R 435.50
Model: TCMD0068HD-SK23
UPC: 6009515877965
Tork Craft Repl. Fuse (42) Stand Service Kit (TCMD0068HD-SK23)
At a Glance: Replacement fuse for stand electrical reference part (42) on TCMD0068HD mag base drills.
A fuse is the small hero that sacrifices itself to protect bigger, more expensive components. If your mag drill suddenly won’t power up after an overload, short, or electrical spike, a blown fuse is often the first thing to check. The Tork Craft TCMD0068HD-SK23 Replacement Fuse ..
R 36.34
Ex VAT:R 31.60
Showing 1 to 33 of 33 (1 Pages)
Information
No Search criteria specified