Search
Search Criteria
Products meeting the search criteria
Model: AT0003-SK01
UPC: 6009515852580
AirCraft Air Impact Wrench Service Kit – Bearings & Washer (4, 5, 7, 10, 27, 35, 42, 43) for AT0003 (AT0003-SK01)
At a Glance: Service kit with bearings, washers/seals and small hardware to refresh the AT0003’s rotating support points and reduce wear-related play.
When an impact wrench starts feeling rough, noisy, or develops unwanted play, worn bearings and washers are often the silent troublemakers. The AirCraft AT0003-SK01 service kit ....
R 49.91
Ex VAT:R 43.40
Model: AT0003-SK02
UPC: 6009515852597
AirCraft Air Impact Wrench Service Kit – Air Flow Regulator (8 / 10–12) for AT0003 (AT0003-SK02)
At a Glance: Air flow regulator service kit for the AirCraft AT0003 to restore controllable power output and dependable air control.
When an impact wrench loses its “feel” — power that surges, a regulator that won’t hold setting, or air leaking around the control area — the air flow regulator components are usually worn or contaminated. The AirCra..
R 16.22
Ex VAT:R 14.10
Model: AT0003-SK03
UPC: 6009515852603
AirCraft Air Impact Wrench Service Kit – Air Inlet (5–9) for AT0003 (AT0003-SK03)
At a Glance: Air inlet service kit for the AirCraft AT0003, including inlet fitting components, spring and ball/valve parts to keep air delivery clean and leak-free.
If your impact wrench is struggling for power, hissing at the inlet, or feeling inconsistent under load, the air inlet assembly is a likely culprit. The AirCraft AT0003-SK03 service kit replaces the..
R 25.76
Ex VAT:R 22.40
Model: AT0003-SK04
UPC: 6009515852610
AirCraft Air Impact Wrench Service Kit – Valve Kit (2–4 / 19–20) for AT0003 (AT0003-SK04)
At a Glance: Valve service kit for the AirCraft AT0003 including key valve components, seal ring and mounting hardware to restore crisp air control.
If your AT0003 has started to feel inconsistent — delayed spool-up, power that comes and goes, or air leaking around the control area — the internal valve assembly is often the root cause. The AirCraft AT000..
R 70.15
Ex VAT:R 61.00
Model: AT0003-SK05
UPC: 6009515852627
AirCraft Air Impact Wrench Service Kit – Trigger Complete (13–14) for AT0003 (AT0003-SK05)
At a Glance: Complete trigger replacement kit for the AirCraft AT0003, including trigger lever and pin to restore crisp, dependable control.
A trigger that feels sticky, sloppy or inconsistent can make an impact wrench frustrating (and unsafe) to use. The AirCraft AT0003-SK05 trigger complete service kit replaces the key trigger components (parts 13–14)..
R 36.57
Ex VAT:R 31.80
Model: AT0003-SK06
UPC: 6009515852634
AirCraft Air Impact Wrench Service Kit – Oil Inlet (15–18) for AT0003 (AT0003-SK06)
At a Glance: Oil inlet/lubrication service kit for the AirCraft AT0003, including oil plug/inlet components and spring-loaded parts to support proper internal lubrication.
Pneumatic impacts work hard, and they rely on one quiet hero to survive the long haul: lubrication. If the oil inlet components are worn, leaking, or not feeding properly, internal parts run..
R 42.55
Ex VAT:R 37.00
Model: AT0003-SK07
UPC: 6009515852641
AirCraft Air Impact Wrench Service Kit – Rear Cover & Scuff (35–40) for AT0003 (AT0003-SK07)
At a Glance: Rear cover and protective scuff/bumper service kit for the AirCraft AT0003, including rear cover, gasket/seal and mounting screws for a proper refit.
The rear cover does more than close off the back of the tool—it helps protect internal components, supports correct sealing, and keeps dust and workshop grime where it belongs (outside).....
R 36.11
Ex VAT:R 31.40
Model: AT0003-SK08
UPC: 6009515852658
AirCraft Air Impact Wrench Service Kit – Rotor Kit (28 / 29 / 31–34) for AT0003 (AT0003-SK08)
At a Glance: Air motor rotor service kit for the AirCraft AT0003, including rotor assembly components and motor plates/housing parts for a full motor refresh.
When an impact wrench starts losing punch, running unevenly, or sounding rough, the air motor is usually telling you it’s tired. The rotor assembly sits at the centre of that motor, and when we..
R 170.78
Ex VAT:R 148.50
Model: AT0003-SK09
UPC: 6009515852665
AirCraft Air Impact Wrench Service Kit – Hammer & Anvil (21–26 / 42) for AT0003 (AT0003-SK09)
At a Glance: Hammer and anvil service kit for the AirCraft AT0003, including the impact mechanism assembly components to restore proper striking action.
The hammer and anvil set is where an impact wrench earns its keep. When these parts wear, the tool may still spin, but it won’t hit like it should—resulting in weak breakaway, inconsistent torque....
R 235.75
Ex VAT:R 205.00
Model: AT0003-SK10
UPC: 6009515860264
AirCraft Air Impact Wrench Service Kit – Rotor bladess Set (6pc) (30) for AT0003 (AT0003-SK10)
At a Glance: 6-piece rotor blades (vane) set for the AirCraft AT0003 air motor to refresh the motor’s sealing surfaces and restore performance.
Rotor bladess (also called vanes) are the working heart of an air motor. As they wear, the motor loses sealing efficiency—meaning slower spool-up, less power, and a tool that feels “tired” even with good air..
R 32.43
Ex VAT:R 28.20
Model: AT0003-SK11
UPC: 6009515860271
AirCraft Air Impact Wrench Service Kit – Main Housing (1 / 41) for AT0003 (AT0003-SK11)
At a Glance: Main housing (body) replacement kit for the AirCraft AT0003, supplied with gasket plate to ensure proper sealing and correct assembly.
The main housing is the backbone of your impact wrench—holding the air motor, valve system and impact mechanism in correct alignment while also protecting everything from knocks and workshop abuse. If the body ..
R 32.43
Ex VAT:R 28.20
Model: AT0004-SK01
UPC: 6009515856113
AirCraft Air Impact Wrench Service Kit – Hammer Gasket & Washers (4 / 6 / 8 / 9 / 14 / 23) for AT0004 (AT0004-SK01)
At a Glance: Sealing and spacing service kit for the AirCraft AT0004 impact mechanism, including gaskets, washers and small retaining components for a tight, correct rebuild.
Inside every impact wrench, the hammer mechanism needs correct spacing and reliable sealing to deliver consistent power. If gaskets flatten, washers we....
R 323.73
Ex VAT:R 281.50
Model: AT0004-SK02
UPC: 6009515856120
AirCraft Air Impact Wrench Service Kit – Hammer Case Complete (1–3 / 5 / 7) for AT0004 (AT0004-SK02)
At a Glance: Complete hammer case service kit for the AirCraft AT0004 including hammer case/housing, large sealing ring, screws and retaining clips for a solid rebuild.
The hammer case is the tough outer shell that holds and protects the impact mechanism—taking the knocks, containing the grease, and keeping everything aligned so the hammer can..
R 512.33
Ex VAT:R 445.50
Model: AT0004-SK03
UPC: 6009515856137
AirCraft Air Impact Wrench Service Kit – Bearings (15 & 22) for AT0004 (AT0004-SK03)
At a Glance: Bearing replacement kit for the AirCraft AT0004, supplying the two key bearings (reference 15 and 22) that support smooth, stable rotation.
Bearings are the silent workhorses inside an impact wrench. When they start to wear, you’ll often notice extra noise, vibration, rough running or a tool that just doesn’t feel as smooth under load. The Ai....
R 404.23
Ex VAT:R 351.50
Model: AT0004-SK04
UPC: 6009515856144
AirCraft Air Impact Wrench Service Kit – Hammer Frame & Bushing (10–13) for AT0004 (AT0004-SK04)
At a Glance: Impact mechanism support kit for the AirCraft AT0004, including hammer frame components, bushing and pins to keep the hammer assembly running true.
The hammer frame is the “skeleton” that supports the impact mechanism inside your wrench. It keeps the hammer components aligned, guides movement, and ensures the impact energy transfe....
R 1,535.83
Ex VAT:R 1,335.50
Model: AT0004-SK05
UPC: 6009515856151
AirCraft Air Impact Wrench Service Kit – Rotor & Cylinder (16 / 17 / 19–21 / 24) for AT0004 (AT0004-SK05)
At a Glance: Air motor core rebuild kit for the AirCraft AT0004 including rotor and cylinder components to bring back smooth, efficient power delivery.
When an impact wrench feels weak, slow to spool up, or rough under load, the air motor is often the culprit. The rotor and cylinder form the core of that motor—where air pressure is co....
R 2,277.00
Ex VAT:R 1,980.00
Model: AT0004-SK06
UPC: 6009515856168
AirCraft Air Impact Wrench Service Kit – Housing & Valve (25–28 / 37 / 40) for AT0004 (AT0004-SK06)
At a Glance: Main housing and air-control valve service kit for the AirCraft AT0004, designed to restore sealing, fitment and smooth trigger/airflow control.
The housing is the backbone of the tool—holding the motor, impact section and handle together—while the valve system controls airflow, direction and trigger response. If the housing is....
R 1,886.00
Ex VAT:R 1,640.00
Model: AT0004-SK07
UPC: 6009515856175
AirCraft Air Impact Wrench Service Kit – Reverse Valve (35–36 / 38–39) for AT0004 (AT0004-SK07)
At a Glance: Reverse valve service kit for the AirCraft AT0004 with springs and detent components to keep the forward/reverse selector crisp and leak-free.
The reverse valve is what lets your impact wrench swap direction—forward to tighten, reverse to loosen—by rerouting airflow inside the motor. When the reverse valve components wear, the tool can..
R 162.15
Ex VAT:R 141.00
Model: AT0004-SK08
UPC: 6009515856182
AirCraft Air Impact Wrench Service Kit – Throttle & Valve Stem (29–34) for AT0004 (AT0004-SK08)
At a Glance: Throttle/trigger valve service kit for the AirCraft AT0004 including spring, valve seat/cap and sealing O-ring to restore smooth air control.
The throttle valve is the “tap” that controls how much air enters your impact wrench when you pull the trigger. If the valve stem or seat is worn, or the spring and seals are tired, you can g....
R 283.48
Ex VAT:R 246.50
Model: AT0004-SK09
UPC: 6009515860103
AirCraft Air Impact Wrench Service Kit – Rotor bladess Only 6pc Set (18) for AT0004 (AT0004-SK09)
At a Glance: 6-piece rotor blades (vane) set for the AirCraft AT0004 air motor—an essential refresh for power, efficiency and smooth rotation.
Rotor bladess (also called vanes) are the wear items inside the air motor that create sealing and drive rotation as compressed air flows through the motor. Over time they can chip, wear short, or become st..
R 158.70
Ex VAT:R 138.00
Model: AT0005-31
AirCraft Chuck 10mm (3/8") for Air Drill 10mm Reversible 1800rpm (AT0005-31)
At a Glance: 10mm (3/8") replacement drill chuck for AirCraft 10mm reversible air drill—restores solid bits grip and smooth drilling control.
A worn chuck turns a good air drill into a frustration machine—bitss slip, wobble increases and accuracy goes out the window. The AirCraft AT0005-31 10mm (3/8") chuck is a replacement chuck for the AirCraft 10mm ....
R 216.20
Ex VAT:R 188.00
Model: AT0005-SK01
UPC: 6009515857370
AirCraft Air Drill Service Kit O-rings and Seals (2,3,5,7,16,24) for AT0005 (AT0005-SK01)
At a Glance: Complete O-ring and seal refresh kit for the AirCraft AT0005 air drill—targets common leak points and worn seals.
When an air drill starts losing power, free-spinning, or hissing like a kettle, the culprit is often tired seals. The AirCraft AT0005-SK01 service kit supplies the O-rings and seals referenced as parts (2,3,5,7,16,24) for the AT0..
R 44.62
Ex VAT:R 38.80
Model: AT0005-SK02
UPC: 6009515857387
AirCraft Air Drill Service Kit Bearings (17,29) for AT0005 (AT0005-SK02)
At a Glance: Bearing replacement kit for the AirCraft AT0005 air drill—helps eliminate rough running, excessive noise and vibration caused by worn bearings.
Bearings are the quiet workhorses inside your air drill—until they wear, then everything gets louder, rougher and less precise. The AirCraft AT0005-SK02 service kit supplies the replacement bearings referenced as par..
R 154.10
Ex VAT:R 134.00
Model: AT0005-SK03
UPC: 6009515857394
AirCraft Air Drill Service Kit Trigger Comp. (4,6,8,9,10-12) for AT0005 (AT0005-SK03)
At a Glance: Trigger component service kit for the AirCraft AT0005 air drill—ideal for fixing sticky triggers, inconsistent throttle response or air leakage around the trigger/valve area.
When an air drill starts acting moody—sticky trigger, uneven speed control, or a little hiss where it shouldn’t—there’s a good chance the trigger/valve parts are worn, dirt..
R 66.24
Ex VAT:R 57.60
Model: AT0005-SK04
UPC: 6009515857400
AirCraft Air Drill Service Kit – Main Body Comp. (1/13-15/35) For AT0005 (AT0005-SK04)
At a Glance: Main body component service kit for AirCraft AT0005 – refreshes housing/control-related parts referenced as 1/13-15/35.
If your AirCraft AT0005 air drill has taken a few knocks, feels loose in the hand, or the controls and body parts are starting to look (and feel) tired, the AT0005-SK04 service kit is the smart fix. This Main Body Components kit..
R 308.20
Ex VAT:R 268.00
Model: AT0005-SK05
UPC: 6009515857417
AirCraft Air Drill Service Kit – Rotor & Cyl. (18/19/21-23) For AT0005 (AT0005-SK05)
At a Glance: Rotor and cylinder service kit for AirCraft AT0005 – replaces parts 18/19/21-23 to restore smooth, consistent drill performance.
When a pneumatic drill starts losing punch, running rough, or struggling to maintain speed, the usual suspects live in the motor group. The AirCraft AT0005-SK05 service kit is a targeted rotor & cylinder refresh desig....
R 226.55
Ex VAT:R 197.00
Model: AT0005-SK06
UPC: 6009515857424
AirCraft Air Drill Service Kit – Gear & Rot. Axle (25-27) For AT0005 (AT0005-SK06)
At a Glance: Gear and rotational axle service kit for AirCraft AT0005 – replaces drive components referenced as 25-27 for smooth, efficient power transfer.
When an air drill starts sounding “gritty”, slipping under load, or losing that crisp torque delivery, the drivetrain is usually crying for attention. The AirCraft AT0005-SK06 service kit is built to refresh t..
R 74.29
Ex VAT:R 64.60
Model: AT0005-SK07
UPC: 6009515857431
AirCraft Air Drill Service Kit – Gear Ring & Fixing Ring (28/30) For AT0005 (AT0005-SK07)
At a Glance: Gear ring and fixing ring service kit for AirCraft AT0005 – replaces parts 28 and 30 to keep the drivetrain tight, aligned, and smooth.
A ring gear that’s worn, chipped, or no longer sitting perfectly can turn a good air drill into a noisy, uneven, power-wasting machine. The AirCraft AT0005-SK07 service kit is designed to refresh the gear ring..
R 113.39
Ex VAT:R 98.60
Model: AT0005-SK08
UPC: 6009515857448
AirCraft Air Drill Service Kit – Chuck & Key (32-34) For AT0005 (AT0005-SK08)
At a Glance: Chuck and key service kit for AirCraft AT0005 – replaces parts 32-34 to restore strong bits grip and smooth tightening.
A worn chuck turns drilling into a constant fight—bitss slip, run off-centre, and tightening never feels quite “right”. The AirCraft AT0005-SK08 service kit replaces the chuck and key components for the AirCraft AT0005, covering referenc..
R 225.40
Ex VAT:R 196.00
Model: AT0005-SK09
UPC: 6009515857455
AirCraft Air Drill Service Kit – Rotor blades 5pc Set (20) For AT0005 (AT0005-SK09)
At a Glance: 5-piece rotor blades (vane) set for AirCraft AT0005 – replaces part 20 to bring back crisp power and smooth air-motor operation.
Rotor bladess (also called vanes) are the hardworking “muscles” inside the air motor—constantly sliding, sealing, and converting compressed air into rotation. Over time they wear down, lose sealing efficiency, and your dri..
R 24.38
Ex VAT:R 21.20
Model: AT0006-SK01
UPC: 6009515856571
AirCraft Air Impact Wrench Service Kit – Bearings & Washer (4/5/7/10/27/35/42/43) For AT0006 (AT0006-SK01)
At a Glance: Bearing and washer service kit for AirCraft AT0006 – replaces multiple support/spacer parts to restore smooth rotation and correct internal alignment.
Inside an impact wrench, bearings and washers quietly do the hard work—supporting rotating assemblies, controlling end-float, and keeping everything aligned while the hammer mec..
R 49.91
Ex VAT:R 43.40
Model: AT0006-SK02
UPC: 6009515856588
AirCraft Air Impact Wrench Service Kit – Air Flow Reg. (8/10-12) For AT0006 (AT0006-SK02)
At a Glance: Air flow regulator service kit for AirCraft AT0006 – replaces parts 8 and 10-12 to bring back controlled power and stable airflow.
When an impact wrench feels inconsistent—jumping between weak and wild, refusing to dial down smoothly, or leaking air around the control area—the airflow regulator is usually the culprit. The AirCraft AT0006-SK02 ..
R 16.22
Ex VAT:R 14.10
Model: AT0006-SK03
UPC: 6009515856595
AirCraft Air Impact Wrench Service Kit – Air Inlet (5-9) For AT0006 (AT0006-SK03)
At a Glance: Air inlet service kit for AirCraft AT0006 – replaces inlet and sealing parts 5-9 to maintain airtight connections and consistent airflow.
If your impact wrench is hissing at the back end, losing power, or feeling inconsistent, the problem is often right where the air enters the tool. The AirCraft AT0006-SK03 service kit refreshes the air inlet compone..
R 25.76
Ex VAT:R 22.40
Model: AT0006-SK04
UPC: 6009515856601
AirCraft Air Impact Wrench Service Kit – Valve Kit (2-4/19/20) For AT0006 (AT0006-SK04)
At a Glance: Valve service kit for AirCraft AT0006 – replaces parts 2-4, 19 and 20 to bring back smooth, responsive airflow control.
If your impact wrench trigger feels sticky, the tool runs on after you release, or airflow seems inconsistent, the valve system is often where the trouble starts. The AirCraft AT0006-SK04 service kit is a dedicated Valve Kit fo..
R 482.43
Ex VAT:R 419.50
Model: AT0006-SK05
UPC: 6009515856618
AirCraft Air Impact Wrench Service Kit – Trigger Comp. (13-14) For AT0006 (AT0006-SK05)
At a Glance: Trigger component service kit for AirCraft AT0006 – replaces parts 13-14 for smoother trigger action and dependable control.
A tired trigger turns a great impact wrench into an annoying (and sometimes unsafe) tool—sticky engagement, inconsistent response, or a trigger that doesn’t return cleanly can slow you down fast. The AirCraft AT0006-SK05 s..
R 36.57
Ex VAT:R 31.80
Model: AT0006-SK06
UPC: 6009515856625
AirCraft Air Impact Wrench Service Kit – Oil Inlet (15-18) For AT0006 (AT0006-SK06)
At a Glance: Oil inlet service kit for AirCraft AT0006 – replaces parts 15-18 to maintain correct lubrication and protect the tool under heavy use.
Pneumatic impact tools live and die by lubrication. When the oil inlet parts are worn, blocked, or leaking, internal components run dry, heat builds up, and wear accelerates fast. The AirCraft AT0006-SK06 service kit..
R 296.70
Ex VAT:R 258.00
Model: AT0006-SK07
UPC: 6009515856632
AirCraft Air Impact Wrench Service Kit – Rear Cover & Scuff (35-40) For AT0006 (AT0006-SK07)
At a Glance: Rear cover and scuff service kit for AirCraft AT0006 – replaces parts 35-40 to restore sealing, protection, and a tight rear assembly.
The rear end of an impact wrench takes real abuse—drops, knocks, vibration, and all the grit that workshop life throws at it. When the rear cover or sealing components are worn, you can end up with air leaks..
R 268.53
Ex VAT:R 233.50
Model: AT0006-SK08
UPC: 6009515856649
AirCraft Air Impact Wrench Service Kit – Rotor Kit (28/29/31-34) For AT0006 (AT0006-SK08)
At a Glance: Rotor kit for AirCraft AT0006 – renews the air-motor core parts to bring back smooth running and dependable power.
When an impact wrench starts feeling lazy, uneven, or rough—especially after long service hours—the air motor is often where performance is being lost. The AirCraft AT0006-SK08 Rotor Kit is designed for the AirCraft AT0006 air imp..
R 108.56
Ex VAT:R 94.40
Model: AT0006-SK09
UPC: 6009515856656
AirCraft Air Impact Wrench Service Kit – Hammer & Anvil (21-26/42/43) For AT0006 (AT0006-SK09)
At a Glance: Hammer and anvil service kit for AirCraft AT0006 – replaces impact components 21-26 plus supporting parts 42/43 for restored strike power.
If an impact wrench has air and speed but no real “hit”, the hammer mechanism is usually worn, chipped, or losing proper engagement. That’s where the magic happens—the rotating mass builds energy and r..
R 251.85
Ex VAT:R 219.00
Model: AT0006-SK10
UPC: 6009515860288
AirCraft Air Impact Wrench Service Kit – Rotor bladess Set 6pc (30) For AT0006 (AT0006-SK10)
At a Glance: 6-piece rotor blades (vane) set for AirCraft AT0006 – replaces part 30 to bring back efficient motor sealing and consistent power.
Rotor bladess (vanes) are the parts inside the air motor that do the constant sliding and sealing work that turns compressed air into rotation. As they wear, the motor loses sealing efficiency and the tool start..
R 32.43
Ex VAT:R 28.20
Model: AT0006-SK11
UPC: 6009515860295
AirCraft Air Impact Wrench Service Kit – Main Housing (1/41) For AT0006 (AT0006-SK11)
At a Glance: Main housing service kit for AirCraft AT0006 – replaces the core body components (1/41) to refurbish and protect the tool.
The main housing is the backbone of an impact wrench—everything mounts to it, aligns inside it, and relies on it to stay protected while the tool hammers away. If the housing is cracked, damaged, or worn at key mounting points..
R 331.78
Ex VAT:R 288.50
Model: AT0007-SK01
UPC: 6009515856663
AirCraft Air Die Grinder Service Kit – O-ring & Busch (8/9/13/23/25) For AT0007 (AT0007-SK01)
At a Glance: O-ring and bush service kit for AirCraft AT0007 1/4" die grinder – replaces key sealing and support parts to prevent leaks and restore smooth operation.
A die grinder works best when it’s airtight and properly supported internally. Over time, O-rings harden or flatten, and bush components can wear—leading to air leaks, inconsisten....
R 10.81
Ex VAT:R 9.40
Model: AT0007-SK02
UPC: 6009515856670
AirCraft Air Die Grinder Service Kit – Main Housing Comp. (1/2/32) For AT0007 (AT0007-SK02)
At a Glance: Main housing component kit for AirCraft AT0007 1/4" die grinder – replaces parts 1, 2 and 32 to refurbish the tool body and restore proper alignment.
A die grinder depends on a straight, solid housing to keep the internals aligned and the air path sealed. If the body is damaged, worn at the threads, or no longer seats components properl....
R 131.10
Ex VAT:R 114.00
Model: AT0007-SK03
UPC: 6009515856687
AirCraft Air Die Grinder Service Kit – Bearings (17/26) For AT0007 (AT0007-SK03)
At a Glance: Bearing replacement kit for AirCraft AT0007 1/4" die grinder – replaces bearings 17 and 26 for smoother running and reduced vibration.
Bearings are the quiet heroes inside a die grinder. When they start to wear, you’ll often notice noise, heat, vibration, or a slight wobble that ruins control and finish quality. The AirCraft AT0007-SK03 service ki....
R 59.57
Ex VAT:R 51.80
Model: AT0007-SK04
UPC: 6009515856694
AirCraft Air Die Grinder Service Kit – Trigger Comp. (3-7) For AT0007 (AT0007-SK04)
At a Glance: Trigger component service kit for AirCraft AT0007 1/4" die grinder – replaces parts 3-7 to restore smooth throttle response and dependable control.
A die grinder is only as good as its control. If the trigger feels sticky, inconsistent, or doesn’t return cleanly, it makes precision work harder—and can be a safety risk in a busy workshop. The Ai....
R 28.52
Ex VAT:R 24.80
Model: AT0007-SK05
UPC: 6009515856700
AirCraft Air Die Grinder Service Kit – Exhaust & Air Inlet (10-12/14-16) For AT0007 (AT0007-SK05)
At a Glance: Exhaust and air inlet service kit for AirCraft AT0007 1/4" die grinder – replaces key airflow parts (10-12 and 14-16) for reliable air delivery and smooth running.
When a die grinder starts leaking at the inlet, feels restricted, or the exhaust flow seems “off”, the problem is often in the air inlet and exhaust components—thre....
R 63.48
Ex VAT:R 55.20
Model: AT0007-SK06
UPC: 6009515856717
AirCraft Air Die Grinder Service Kit – Rotar & Cylinder Comp. (18/20/22/24/25) For AT0007 (AT0007-SK06)
At a Glance: Rotor and cylinder component kit for AirCraft AT0007 1/4" die grinder – replaces core air motor parts to restore power and smoothness.
When a die grinder loses its “bitse”, the issue is often inside the air motor—wear on the rotor, cylinder, or related components reduces sealing efficiency and torque. The AirCraft AT0007....
R 128.23
Ex VAT:R 111.50
Model: AT0007-SK07
UPC: 6009515856724
AirCraft Air Die Grinder Service Kit – Collet Fixing Comp. (27-29/31) For AT0007 (AT0007-SK07)
At a Glance: Collet fixing component kit for AirCraft AT0007 1/4" die grinder – renews the collet and retaining parts for secure accessory grip and smoother, safer operation.
If your die grinder accessories slip, don’t seat properly, or you notice extra run-out (wobble), the culprit is often a worn collet or damaged fixing parts. A strong, accura....
R 95.68
Ex VAT:R 83.20
Model: AT0007-SK08
UPC: 6009515856731
AirCraft Air Die Grinder Service Kit – Collet (30) For AT0007 (AT0007-SK08)
At a Glance: Replacement collet for AirCraft AT0007 1/4" die grinder – restores proper clamping force and accurate accessory running.
The collet is the business end of a die grinder—if it’s worn, you’ll feel it immediately: accessories slip, wobble, or don’t clamp evenly. That means more vibration, less control, and a higher chance of damaging burrs and stones. The....
R 40.48
Ex VAT:R 35.20
Model: AT0007-SK09
UPC: 6009515856748
AirCraft Air Die Grinder Service Kit – Rotor bladess (21) For AT0007 (AT0007-SK09)
At a Glance: Rotor blades replacement kit for AirCraft AT0007 1/4" die grinder – refreshes the air motor’s vanes for better sealing and stronger performance.
Rotor bladess (also called vanes) are the consumable “muscle fibres” inside a pneumatic motor. As they wear, chip, or glaze over, the motor can lose sealing efficiency—leading to sluggish spin-up, lower....
R 17.71
Ex VAT:R 15.40
Information
No Search criteria specified