Search
Search Criteria
Products meeting the search criteria
Stock: In Stock
Model: AT0018-02
AirCraft Outer Sleeve for Air Hydraulic Riveter (AT0018-02)
At a Glance: Replacement outer sleeve assembly for AirCraft air hydraulic riveters—supports the front-end mechanism for smooth, controlled riveting.
The AirCraft AT0018-02 Outer Sleeve is a key front-end component for an AirCraft Air Hydraulic Riveter. This sleeve forms part of the nose/front assembly, helping keep internal parts aligned and protected while the tool applies pulling force on rivet mandrels.
If your rivet..
R 386.00
Ex VAT:R 335.65
Out Of Stock
Stock: Out Of Stock
Model: AT0018-04
AirCraft Jaw Assembly 3 Piece for Air Hydraulic Riveter (AT0018-04)
At a Glance: 3-piece replacement jaw set for AirCraft air hydraulic riveters—grips the mandrel securely for consistent pulling power and clean rivet setting.
The AirCraft AT0018-04 Jaw Assembly is a 3-piece jaw set that forms the gripping heart of an Air Hydraulic Riveter. These jaws bite onto the rivet mandrel and pull it with controlled force to set the rivet properly. Over time, jaw teeth wear, jaws glaze, and gri..
R 257.89
Ex VAT:R 224.25
Out Of Stock
Stock: Out Of Stock
Model: AT0018-24
AirCraft Air Cylinder Cover for Air Hydraulic Riveter (AT0018-24)
At a Glance: Replacement air cylinder cover components for AirCraft air hydraulic riveters—supports sealing and smooth cycling for consistent riveting performance.
The AirCraft AT0018-24 Air Cylinder Cover is a critical service part for the air cylinder section of an AirCraft Air Hydraulic Riveter. The cylinder cover forms part of the air motor/cylinder assembly, helping to locate internal components, support sealing s..
R 417.62
Ex VAT:R 363.15
Stock: In Stock
Model: AT0018-C02
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C02)
At a Glance: Service wrench for AirCraft air hydraulic riveters—designed to fit riveter fittings and nose components for quick, secure maintenance.
The AirCraft AT0018-C02 Wrench is the correct tool to keep your Air Hydraulic Riveter properly serviced and ready for work. It’s designed to suit key fittings and nose/front-end components, making it easier to tighten, loosen, and maintain parts without slipping, rounding, or damaging..
R 33.98
Ex VAT:R 29.55
Stock: In Stock
Model: AT0018-C03
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C03)
At a Glance: Service wrench/spanner for AirCraft air hydraulic riveters—made for loosening and tightening riveter front-end and fitting components with a proper fit.
The AirCraft AT0018-C03 Wrench is a dedicated service spanner for maintaining an AirCraft Air Hydraulic Riveter. It’s designed to fit specific riveter fittings and front-end parts so you can tighten and loosen components cleanly—without slipping, rounding edges, or i..
R 33.98
Ex VAT:R 29.55
Stock: In Stock
Model: AT0018-SK01
UPC: 6009515850821
AirCraft Air Riveter Service Kit O-rings for AT0018 Air Hydraulic Riveter (AT0018-SK01)
At a Glance: Comprehensive O-ring service kit for the AirCraft AT0018 Air Hydraulic Riveter—refreshes critical seals to reduce air/oil leaks and restore smooth, reliable operation.
The AirCraft AT0018-SK01 Service Kit is the essential seal refresh for the AT0018 Air Hydraulic Riveter. O-rings might be small, but in an air-hydraulic tool they do serious work—maintaining pressure control, keeping th..
R 152.32
Ex VAT:R 132.45
Stock: In Stock
Model: AT0018-SK02
UPC: 6009515850838
AirCraft Air Riveter Service Kit Air Valve Seals for AT0018 Air Hydraulic Riveter (AT0018-SK02)
At a Glance: Air valve seal service kit for the AirCraft AT0018 Air Hydraulic Riveter—refreshes critical valve sealing parts for smoother control and leak-free operation.
The AirCraft AT0018-SK02 Service Kit is focused on the air valve sealing section of the AT0018 Air Hydraulic Riveter. These seals are responsible for controlling airflow through the valve system—directly influencing trigg..
R 234.89
Ex VAT:R 204.25
Stock: In Stock
Model: AT0018-SK03
UPC: 6009515850845
AirCraft Air Riveter Service Kit Nose Piece Components for AT0018 Air Hydraulic Riveter (AT0018-SK03)
At a Glance: Nose piece component service kit for the AirCraft AT0018 Air Hydraulic Riveter—refreshes the front-end assembly for reliable mandrel control and consistent rivet setting.
The AirCraft AT0018-SK03 Service Kit is a front-end rebuild kit for the AT0018 Air Hydraulic Riveter, supplying the key nose piece components that guide the mandrel and support the riveter’s pulling act..
R 716.16
Ex VAT:R 622.75
Stock: In Stock
Model: AT0018-SK04
UPC: 6009515850852
AirCraft Air Riveter Service Kit Axis Components for AT0018 Air Hydraulic Riveter (AT0018-SK04)
At a Glance: Axis component service kit for the AirCraft AT0018 Air Hydraulic Riveter—refreshes key guide and movement parts for smoother, more consistent riveting cycles.
The AirCraft AT0018-SK04 Service Kit is designed to rebuild the axis/guide component section of the AT0018 Air Hydraulic Riveter. These parts work together to keep the internal movement straight, controlled, and repeatab..
R 939.32
Ex VAT:R 816.80
Stock: In Stock
Model: AT0018-SK05
UPC: 6009515850869
AirCraft Air Riveter Service Kit Air Cylinder Components for AT0018 Air Hydraulic Riveter (AT0018-SK05)
At a Glance: Air cylinder component service kit for the AirCraft AT0018 Air Hydraulic Riveter—refreshes the cylinder assembly for smoother action and dependable pull cycles.
The AirCraft AT0018-SK05 Service Kit is designed to rebuild the air cylinder component group on the AT0018 Air Hydraulic Riveter. The air cylinder section is where controlled air pressure is converted into the ..
R 845.25
Ex VAT:R 735.00
Stock: In Stock
Model: AT0018-SK06
UPC: 6009515850876
AirCraft Air Riveter Service Kit Bolt Replacements for AT0018 Air Hydraulic Riveter (AT0018-SK06)
At a Glance: Bolt/pin replacement service kit for the AirCraft AT0018 Air Hydraulic Riveter—refreshes key fasteners and locating pins to keep the riveter tight, aligned, and reliable.
The AirCraft AT0018-SK06 Service Kit supplies bolt and pin replacements for the AT0018 Air Hydraulic Riveter. These “small parts” do a big job: they locate components, retain moving assemblies, and keep the..
R 117.47
Ex VAT:R 102.15
Stock: In Stock
Model: AT0018-SK07
UPC: 6009515850883
AirCraft Air Riveter Service Kit Trigger Components for AT0018 Air Hydraulic Riveter (AT0018-SK07)
At a Glance: Trigger component service kit for the AirCraft AT0018 Air Hydraulic Riveter—refreshes the trigger mechanism for smoother operation and reliable cycling control.
The AirCraft AT0018-SK07 Service Kit is designed to rebuild the trigger component section of the AT0018 Air Hydraulic Riveter. The trigger isn’t just a lever—it controls airflow into the system, which means it direc..
R 704.49
Ex VAT:R 612.60
Stock: In Stock
Model: AT0018-SK08
UPC: 6009515850890
AirCraft Air Riveter Service Kit Air Cylinder for AT0018 Air Hydraulic Riveter (AT0018-SK08)
At a Glance: Air cylinder service kit for the AirCraft AT0018 Air Hydraulic Riveter—refreshes the cylinder assembly for consistent pull cycles and dependable workshop performance.
The AirCraft AT0018-SK08 Service Kit is a cylinder-focused rebuild kit for the AT0018 Air Hydraulic Riveter. The air cylinder is a major working section of the tool—controlling movement and helping drive the cycle t..
R 2,254.17
Ex VAT:R 1,960.15
Stock: In Stock
Model: AT0018-SK09
UPC: 6009515850906
AirCraft Air Riveter Service Kit Nose Piece 4 Piece Set for AT0018 Air Hydraulic Riveter (AT0018-SK09)
At a Glance: 4-piece nose piece set for the AirCraft AT0018 Air Hydraulic Riveter—match the correct nose to your rivet size for clean seating and dependable operation.
The AirCraft AT0018-SK09 Service Kit is a 4-piece nose piece set for the AT0018 Air Hydraulic Riveter. Nose pieces (also called nozzles) are the business end of the riveter: they support the rivet head, guide the mand..
R 234.89
Ex VAT:R 204.25
Stock: In Stock
Model: AT0018-SK10
UPC: 6009515850913
AirCraft Air Riveter Service Kit Jaw Assembly 3 Piece for AT0018 Air Hydraulic Riveter (AT0018-SK10)
At a Glance: 3-piece jaw assembly service kit for the AirCraft AT0018 Air Hydraulic Riveter—restores proper mandrel bite for clean, consistent riveting.
The AirCraft AT0018-SK10 Service Kit is a 3-piece jaw assembly replacement set for the AT0018 Air Hydraulic Riveter. These jaws are the gripping engine of the tool: they bite onto the mandrel and pull with controlled force to set the ..
R 187.97
Ex VAT:R 163.45
Stock: In Stock
Model: AT0018-SK11
UPC: 6009515850920
AirCraft Main Body for Air Hydraulic Riveter AT0018
At a Glance: Main body housing for the AirCraft AT0018—forms the core structure of the air hydraulic riveter.
The AirCraft Main Body for the AT0018 Air Hydraulic Riveter is the central structural housing that holds the riveter together. This component supports and aligns the internal air and hydraulic assemblies, provides threaded connection .s, and gives the tool its strength and rigidity during high-force riveting operations.
..
R 1,526.28
Ex VAT:R 1,327.20
Stock: In Stock
Model: AT0018-SK12
UPC: 6009515850937
AirCraft Air Riveter Service Kit Base Cover for AT0018 Air Hydraulic Riveter (AT0018-SK12)
At a Glance: Replacement base cover for the AirCraft AT0018 Air Hydraulic Riveter—protects the lower assembly area and helps maintain proper fitment and durability.
The AirCraft AT0018-SK12 Service Kit is a replacement base cover for the AT0018 Air Hydraulic Riveter. While it might look simple, the base cover plays an important role: it protects the lower section of the riveter assembly from kn..
R 93.90
Ex VAT:R 81.65
Showing 1 to 17 of 17 (1 Pages)
Information
No Search criteria specified