Steel and Metals Annular

Stock: 51 Model: TCAC0001 UPC: 6009515814908

Morse Taper to Weldon adaptor MT3 to Weldon Adaptor Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank....

R 1,168.52

Ex VAT:R 1,016.10

Contact us

Stockist

Stock: 40 Model: TCAC0002 UPC: 6009515819873

Tool Holder Mt2 - 3/4" Weldon Shank

Morse Taper to Weldon adaptor MT2 to Weldon Adaptor Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank....

R 1,333.43

Ex VAT:R 1,159.50

Contact us

Stockist

Stock: 3921 Model: TCAC0004 UPC: 6009515814915

Pilot Pin 6.3 X 79mm For Hss Broach Cutters 30mm

Annular Cutter Pilot Pin 6.3 mm Pilot Pin for 30 mm Annular Cutters Pilot pin with length of 79 mm specifically for annular cutters (broach cutters) with a cutting length of 30 mm. ....

R 34.06

Ex VAT:R 29.62

Contact us

Stockist

Stock: 3442 Model: TCAC0005 UPC: 6009515814922

Pilot Pin 6.3 X 102mm For Hss Broach Cutters 55mm

Annular Cutter Pilot Pin 6.3 mm Pilot Pin for 55 mm Annular Cutters Pilot pin with length of 102 mm specifically for annular cutters (broach cutters) with a cutting length of 55 mm. ....

R 44.03

Ex VAT:R 38.29

Contact us

Stockist

Stock: 14 Model: TCAC0005-01 UPC: 6009515897802

Pilot Pin Tct Cutter 12 - 17mm X 55mm 6.3 X 106mm Broach Cutters

Tork Craft Pilot Pin for TCT Cutters — 12–17 mm × 55 mm (Model TCAC0005-01) The Tork Craft TCAC0005-01 pilot pin is designed for use with TCT annular cutters ranging from 12 to 17 mm in diameter and 55 mm cutting depth. This precision-ground pilot pin guides the cutter for perfect centering and facilitates smooth slug ejection after drilling. Manufactured from high-grade steel, it ensures stability and performance when used with magnetic drill systems and broach cutters.....

R 109.31

Ex VAT:R 95.05

Contact us

Stockist

Stock: 63 Model: TCAC0005-02 UPC: 6009515897819

Pilot Pin Tct Cutter 18 - 102mm X 35mm 7.9 X 90mm Broach Cutters

Tork Craft Pilot Pin for TCT Cutters — 18–102 mm × 35 mm (Model TCAC0005-02) The Tork Craft TCAC0005-02 pilot pin is designed for tungsten-carbide tipped (TCT) annular cutters sized from 18 mm up to 102 mm diameter, supporting a 35 mm cutting depth. The robust 7.9 mm × 90 mm shank provides secure engagement with standard drill systems, and the precision pilot drill center ensures accurate hole placement and reliable slug ejection for efficient drilling operations.....

R 104.08

Ex VAT:R 90.50

Contact us

Stockist

Stock: 49 Model: TCAC0005-03 UPC: 6009515897826

Pilot Pin Tct Cutter 12 - 17mm X 35mm 6.3 X 90mm Broach Cutte

Tork Craft Pilot Pin for TCT Cutters — 12–17 mm × 35 mm (Model TCAC0005-03) The Tork Craft TCAC0005-03 pilot pin is engineered for use with TCT (tungsten carbide tipped) annular cutters sized 12 mm to 17 mm diameter and 35 mm cutting depth. The strong 6.3 mm × 90 mm shank ensures compatibility with standard magnetic drills and helps guide the cutter precisely while enabling smooth slug ejection.....

R 72.28

Ex VAT:R 62.85

Contact us

Stockist

Stock: 118 Model: TCAC0005-04 UPC: 6009515897833

Pilot Pin Tct Cutter 18mm - 102mm X 50mm 7.9 X 108mm Broach Cutte

Tork Craft Pilot Pin for TCT Cutters — 18-102 mm × 50 mm (Model TCAC0005-04) The Tork Craft TCAC0005-04 pilot pin is designed for use with tungsten-carbide tipped (TCT) annular cutters sized from 18 mm up to 102 mm in diameter, supporting a 50 mm cutting depth. The robust 7.9 mm × 108 mm shank ensures secure engagement with standard drill systems, and the precision pilot drill center ensures accurate hole placement and reliable slug ejection for efficient drilling operations.....

R 101.27

Ex VAT:R 88.06

Contact us

Stockist

Stock: 18 Model: TCAC006 UPC: 6009515820701

Drill Bit Hss W/weldon Shank 6mm

6mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 400.03

Ex VAT:R 347.85

Contact us

Stockist

Stock: 3 Model: TCAC008 UPC: 6009515820718

Drill Bit Hss W/weldon Shank 8mm

8mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 329.76

Ex VAT:R 286.75

Contact us

Stockist

Stock: 27 Model: TCAC009 UPC: 6009515820725

Drill Bit Hss W/weldon Shank 9mm

9mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 414.40

Ex VAT:R 360.35

Contact us

Stockist

Stock: 199 Model: TCAC010 UPC: 6009515820732

Drill Bit Hss W/weldon Shank 10mm

11mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 437.35

Ex VAT:R 380.30

Contact us

Stockist

Stock: 49 Model: TCAC011 UPC: 6009515820749

Drill Bit Hss W/weldon Shank 11mm

11mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 394.34

Ex VAT:R 342.90

Contact us

Stockist

Stock: 303 Model: TCAC012-1 UPC: 6009515814427

Annular Hole Cutter Hss 12 X 30mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT, 12 × 30 mm, Weldon Shank 19.05 mm (Model TCAC012-1) One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of ..

R 373.39

Ex VAT:R 324.69

Contact us

Stockist

Stock: 284 Model: TCAC012-2 UPC: 6009515814434

Annular Hole Cutter Hss 12 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 12 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 481.71

Ex VAT:R 418.88

Contact us

Stockist

Stock: 54 Model: TCAC012-3 UPC: 6009515895006

Annular Hole Cutter Tct 12 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT, 12 × 35 mm, Weldon Shank 19.05 mm (Model TCAC012-3) The Tork Craft TCAC012-3 is a tungsten-carbide tipped (TCT) annular cutter with a 12 mm diameter and 35 mm cutting depth, featuring a 19.05 mm Weldon Shank design. This tool is engineered for efficient core drilling through steel, structural sections and other metal fabrication work where precise, clean holes are needed.....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 34 Model: TCAC012-4 UPC: 6009515895013

Annular Hole Cutter Tct 12 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT, 12 × 55 mm, Weldon Shank 19.05 mm (Model TCAC012-4) The Tork Craft TCAC012-4 is a tungsten-carbide tipped (TCT) annular cutter with a 12 mm diameter and 55 mm cutting depth, featuring a 19.05 mm Weldon Shank design. This tool is engineered for efficient core drilling through steel, structural sections and other metal fabrication work where clean, accurate holes are required.....

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 215 Model: TCAC013-1 UPC: 6009515814441

Annular Hole Cutter Hss 13 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 13 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 364.26

Ex VAT:R 316.75

Contact us

Stockist

Stock: 66 Model: TCAC013-2 UPC: 6009515814472

Annular Hole Cutter Hss 13 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 13 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 481.71

Ex VAT:R 418.88

Contact us

Stockist

Stock: 918 Model: TCAC014-1 UPC: 6009515814458

Annular Hole Cutter Hss 14 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 14 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 364.26

Ex VAT:R 316.75

Contact us

Stockist

Stock: 428 Model: TCAC014-2 UPC: 6009515814465

Annular Hole Cutter Hss 14 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 14 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 453.62

Ex VAT:R 394.45

Contact us

Stockist

Stock: 113 Model: TCAC014-3 UPC: 6009515895020

Annular Hole Cutter Tct 14 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT, 14 × 35 mm, Weldon Shank 19.05 mm (Model TCAC014-3) The Tork Craft TCAC014-3 is a tungsten-carbide tipped (TCT) annular cutter with a 14 mm diameter and 35 mm cutting depth, featuring a 19.05 mm Weldon shank. Engineered for steel fabrication and structural work, this tool delivers fast, clean holes in metal with minimal material waste and exceptional precision.....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 103 Model: TCAC014-4 UPC: 6009515895037

Annular Hole Cutter Tct 14 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT, 14 × 55 mm, Weldon Shank 19.05 mm (Model TCAC014-4) The Tork Craft TCAC014-4 is a tungsten-carbide tipped (TCT) annular cutter with a 14 mm diameter and 55 mm cutting depth, featuring a 19.05 mm Weldon shank. This tool is engineered for high-performance core drilling in steel fabrication, structural sections and precision metalwork where clean, accurate holes are required.....

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 39 Model: TCAC015-1 UPC: 6009515814489

Annular Hole Cutter Hss 15 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 15 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 345.58

Ex VAT:R 300.50

Contact us

Stockist

Stock: 37 Model: TCAC015-2 UPC: 6009515814496

Annular Hole Cutter Hss 15 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 15 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 460.52

Ex VAT:R 400.45

Contact us

Stockist

Stock: 786 Model: TCAC016-1 UPC: 6009515814502

Annular Hole Cutter Hss 16 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 16 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 391.35

Ex VAT:R 340.30

Contact us

Stockist

Stock: 381 Model: TCAC016-2 UPC: 6009515814519

Annular Hole Cutter Hss 16 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 16 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 515.49

Ex VAT:R 448.25

Contact us

Stockist

Stock: 45 Model: TCAC016-3 UPC: 6009515895044

Annular Hole Cutter Tct 16 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT, 16×35 mm, Weldon Shank 19.05 mm (Model TCAC016-3) The Tork Craft TCAC016-3 annular cutter features a 16 mm diameter and 35 mm cutting depth, with a 19.05 mm Weldon shank for use in magnetic drills and fabrication rigs. The TCT (tungsten carbide tipped) cutting edges provide excellent durability and precision, allowing fast, clean core-hole drilling in structural steel, fabrication and metalwork.....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 45 Model: TCAC016-4 UPC: 6009515895051

Annular Hole Cutter Tct 16 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT, 16 × 55 mm, Weldon Shank 19.05 mm (Model TCAC016-4) The Tork Craft TCAC016-4 annular cutter features a 16 mm diameter with a 55 mm cutting depth and a 19.05 mm Weldon shank. Built for demanding fabrication work, its tungsten-carbide tipped (TCT) cutting edges ensure fast, clean holes in steel, structural sections or pipe applications where precision and durability matter.....

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 247 Model: TCAC017-1 UPC: 6009515814526

Annular Hole Cutter Hss 17 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 17 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 409.63

Ex VAT:R 356.20

Contact us

Stockist

Stock: 64 Model: TCAC017-2 UPC: 6009515814533

Annular Hole Cutter Hss 17 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 17 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 507.27

Ex VAT:R 441.10

Contact us

Stockist

Stock: 1687 Model: TCAC018-1 UPC: 6009515814540

Annular Hole Cutter Hss 18 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 18 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 411.01

Ex VAT:R 357.40

Contact us

Stockist

Stock: 798 Model: TCAC018-2 UPC: 6009515814557

Annular Hole Cutter Hss 18 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 18 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 590.03

Ex VAT:R 513.07

Contact us

Stockist

Stock: 58 Model: TCAC018-3 UPC: 6009515895068

Annular Hole Cutter Tct 18 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 18 X 35MM WELD SHANK 19.05MM....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Annular Hole Cutter Tct 18 X 55mm Weld Shank 19.05mm

In Stock Soon

Stock: In Stock Soon Model: TCAC018-4 UPC: 6009515895075

Annular Hole Cutter Tct 18 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 18 X 55MM WELD SHANK 19.05MM....

R 879.76

Ex VAT:R 765.01

New Expected Date :

15/02/2026

Contact us

Stockist

Stock: 228 Model: TCAC019-1 UPC: 6009515814564

Annular Hole Cutter Hss 19 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 19 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 419.23

Ex VAT:R 364.55

Contact us

Stockist

Stock: 9 Model: TCAC019-2 UPC: 6009515814571

Annular Hole Cutter Hss 19 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 18 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 590.03

Ex VAT:R 513.07

Contact us

Stockist

Stock: 510 Model: TCAC020-1 UPC: 6009515814588

Annular Hole Cutter Hss 20 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 20 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 457.99

Ex VAT:R 398.25

Contact us

Stockist

Stock: 225 Model: TCAC020-2 UPC: 6009515814595

Annular Hole Cutter Hss 20 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 20 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 603.46

Ex VAT:R 524.75

Contact us

Stockist

Stock: 35 Model: TCAC020-3 UPC: 6009515895082

Annular Hole Cutter Tct 20 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 20 X 35MM WELD SHANK 19.05MM....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 32 Model: TCAC020-4 UPC: 6009515895099

Annular Hole Cutter Tct 20 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 20 X 55MM WELD SHANK 19.05MM....

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 48 Model: TCAC021-1 UPC: 6009515814601

Annular Hole Cutter Hss 21 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 21 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 460.52

Ex VAT:R 400.45

Contact us

Stockist

Stock: 31 Model: TCAC021-2 UPC: 6009515814618

Annular Hole Cutter Hss 21 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 21 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 611.74

Ex VAT:R 531.95

Contact us

Stockist

Stock: 1408 Model: TCAC022-1 UPC: 6009515814625

Annular Hole Cutter Hss 22 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 22 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 512.61

Ex VAT:R 445.75

Contact us

Stockist

Stock: 241 Model: TCAC022-2 UPC: 6009515814632

Annular Hole Cutter Hss 22 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 22 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 644.69

Ex VAT:R 560.60

Contact us

Stockist

Stock: 96 Model: TCAC022-3 UPC: 6009515895105

Annular Hole Cutter Tct 22 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 22 X 35MM WELD SHANK 19.05MM....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 9 Model: TCAC022-4 UPC: 6009515895112

Annular Hole Cutter Tct 22 X 55mm Weld Shank 19.05m

ANNULAR HOLE CUTTER TCT 22 X 55MM WELD SHANK 19.05M....

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 84 Model: TCAC023-1 UPC: 6009515817510

Annular Hole Cutter Hss 23 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 23 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 507.50

Ex VAT:R 441.30

Contact us

Stockist

Stock: 68 Model: TCAC023-2 UPC: 6009515817527

Annular Hole Cutter Hss 23 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 23 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 685.98

Ex VAT:R 596.50

Contact us

Stockist

Stock: 313 Model: TCAC024-1 UPC: 6009515814649

Annular Hole Cutter Hss 24 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 24 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 552.46

Ex VAT:R 480.40

Contact us

Stockist

South Africa's #1 Supplier of Power Tools Accessories

Inside Vermont Sales

Corporate Information

Legal Information

Store Display Concepts

Warranties offered

Filter

Our Catalogue

Annular