Vermont Sales Products

Stock: 1381 Model: TCAC022-1 UPC: 6009515814625

Annular Hole Cutter Hss 22 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 22 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 512.61

Ex VAT:R 445.75

Contact us

Stockist

Stock: 227 Model: TCAC022-2 UPC: 6009515814632

Annular Hole Cutter Hss 22 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 22 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 644.69

Ex VAT:R 560.60

Contact us

Stockist

Stock: 96 Model: TCAC022-3 UPC: 6009515895105

Annular Hole Cutter Tct 22 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 22 X 35MM WELD SHANK 19.05MM..

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 7 Model: TCAC022-4 UPC: 6009515895112

Annular Hole Cutter Tct 22 X 55mm Weld Shank 19.05m

ANNULAR HOLE CUTTER TCT 22 X 55MM WELD SHANK 19.05M..

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 84 Model: TCAC023-1 UPC: 6009515817510

Annular Hole Cutter Hss 23 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 23 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 507.50

Ex VAT:R 441.30

Contact us

Stockist

Stock: 68 Model: TCAC023-2 UPC: 6009515817527

Annular Hole Cutter Hss 23 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 23 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 685.98

Ex VAT:R 596.50

Contact us

Stockist

Stock: 307 Model: TCAC024-1 UPC: 6009515814649

Annular Hole Cutter Hss 24 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 24 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 552.46

Ex VAT:R 480.40

Contact us

Stockist

Stock: 182 Model: TCAC024-2 UPC: 6009515814656

Annular Hole Cutter Hss 24 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 24 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 749.17

Ex VAT:R 651.45

Contact us

Stockist

Stock: 11 Model: TCAC024-3 UPC: 6009515895129

Annular Hole Cutter Tct 24 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 24 X 35MM WELD SHANK 19.05MM..

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 55 Model: TCAC024-4 UPC: 6009515895136

Annular Hole Cutter Tct 24 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 24 X 55MM WELD SHANK 19.05MM..

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 135 Model: TCAC025-1 UPC: 6009515814663

Annular Hole Cutter Hss 25 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 25 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 542.97

Ex VAT:R 472.15

Contact us

Stockist

Stock: 63 Model: TCAC025-2 UPC: 6009515814670

Annular Hole Cutter Hss 25 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 25 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 776.65

Ex VAT:R 675.35

Contact us

Stockist

Stock: 394 Model: TCAC026-1 UPC: 6009515814687

Annular Hole Cutter Hss 26 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 26 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 641.07

Ex VAT:R 557.45

Contact us

Stockist

Stock: 301 Model: TCAC026-2 UPC: 6009515814694

Annular Hole Cutter Hss 26 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 26 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 804.20

Ex VAT:R 699.30

Contact us

Stockist

Stock: 23 Model: TCAC026-3 UPC: 6009515895143

Annular Hole Cutter Tct 26 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 26 X 35MM WELD SHANK 19.05MM..

R 828.68

Ex VAT:R 720.59

Contact us

Stockist

Stock: 22 Model: TCAC026-4 UPC: 6009515895150

Annular Hole Cutter Tct 26 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 26 X 55MM WELD SHANK 19.05MM..

R 926.43

Ex VAT:R 805.59

Contact us

Stockist

Stock: 59 Model: TCAC027-1 UPC: 6009515814700

Annular Hole Cutter Hss 27 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 27 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 641.07

Ex VAT:R 557.45

Contact us

Stockist

Stock: 27 Model: TCAC027-2 UPC: 6009515814717

Annular Hole Cutter Hss 27 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 27 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 925.55

Ex VAT:R 804.83

Contact us

Stockist

Stock: 112 Model: TCAC028-1 UPC: 6009515814724

Annular Hole Cutter Hss 28 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 28 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 584.20

Ex VAT:R 508.00

Contact us

Stockist

Stock: 99 Model: TCAC028-2 UPC: 6009515814731

Annular Hole Cutter Hss 28 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 28 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 823.40

Ex VAT:R 716.00

Contact us

Stockist

Stock: 33 Model: TCAC028-3 UPC: 6009515895167

Annular Hole Cutter Tct 28 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 28 X 35MM WELD SHANK 19.05MM..

R 828.68

Ex VAT:R 720.59

Contact us

Stockist

Stock: 31 Model: TCAC028-4 UPC: 6009515895174

Annular Hole Cutter Tct 28 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 28 X 55MM WELD SHANK 19.05MM..

R 926.43

Ex VAT:R 805.59

Contact us

Stockist

Stock: 149 Model: TCAC030-1 UPC: 6009515814748

Annular Hole Cutter Hss 30 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 30 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 680.46

Ex VAT:R 591.70

Contact us

Stockist

Stock: 127 Model: TCAC030-2 UPC: 6009515814755

Annular Hole Cutter Hss 30 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 30 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 892.17

Ex VAT:R 775.80

Contact us

Stockist

Stock: 36 Model: TCAC030-3 UPC: 6009515895181

Annular Hole Cutter Tct 30 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 30 X 35MM WELD SHANK 19.05MM..

R 828.68

Ex VAT:R 720.59

Contact us

Stockist

Stock: 59 Model: TCAC030-4 UPC: 6009515895198

Annular Hole Cutter Tct 30 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 30 X 55MM WELD SHANK 19.05MM..

R 926.43

Ex VAT:R 805.59

Contact us

Stockist

Stock: 44 Model: TCAC031-1 UPC: 6009515814762

Annular Hole Cutter Hss 31 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 31 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 833.08

Ex VAT:R 724.42

Contact us

Stockist

Stock: 39 Model: TCAC031-2 UPC: 6009515814779

Annular Hole Cutter Hss 31 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER HSS 31 X 55MM WELD SHANK 19.05MM..

R 740.95

Ex VAT:R 644.30

Contact us

Stockist

Stock: 182 Model: TCAC032-1 UPC: 6009515814786

Annular Hole Cutter Hss 32 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 32 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 795.92

Ex VAT:R 692.10

Contact us

Stockist

Stock: 290 Model: TCAC032-2 UPC: 6009515814793

Annular Hole Cutter Hss 32 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 32 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 840.31

Ex VAT:R 730.70

Contact us

Stockist

Stock: 28 Model: TCAC032-3 UPC: 6009515895204

Annular Hole Cutter Tct 32 X 35mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 32 X 35MM WELD SHANK 19.05MM..

R 1,022.42

Ex VAT:R 889.06

Contact us

Stockist

Stock: 10 Model: TCAC032-4 UPC: 6009515895211

Annular Hole Cutter Tct 32 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER TCT 32 X 55MM WELD SHANK 19.05MM..

R 1,175.66

Ex VAT:R 1,022.31

Contact us

Stockist

Stock: 48 Model: TCAC033-1 UPC: 6009515814809

Annular Hole Cutter Hss 33 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 33 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 804.20

Ex VAT:R 699.30

Contact us

Stockist

Stock: 50 Model: TCAC033-2 UPC: 6009515814816

Annular Hole Cutter Hss 33 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 33 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 927.88

Ex VAT:R 806.85

Contact us

Stockist

Stock: 59 Model: TCAC034-1 UPC: 6009515842598

Annular Hole Cutter Hss 34 X 30mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER HSS 34 X 30MM WELD SHANK 19.05MM..

R 817.94

Ex VAT:R 711.25

Contact us

Stockist

Stock: 39 Model: TCAC034-2 UPC: 6009515842604

Annular Hole Cutter Hss 34 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER HSS 34 X 55MM WELD SHANK 19.05MM..

R 960.88

Ex VAT:R 835.55

Contact us

Stockist

Stock: 26 Model: TCAC035-1 UPC: 6009515814823

Annular Hole Cutter Hss 35 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 35 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 845.42

Ex VAT:R 735.15

Contact us

Stockist

Stock: 36 Model: TCAC035-2 UPC: 6009515814830

Annular Hole Cutter Hss 35 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 35 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 1,098.37

Ex VAT:R 955.10

Contact us

Stockist

Stock: 117 Model: TCAC036-1 UPC: 6009515814847

Annular Hole Cutter Hss 36 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 36 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 864.63

Ex VAT:R 751.85

Contact us

Stockist

Stock: 139 Model: TCAC036-2 UPC: 6009515814854

Annular Hole Cutter Hss 36 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 36 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 1,208.31

Ex VAT:R 1,050.70

Contact us

Stockist

Stock: 60 Model: TCAC038-1 UPC: 6009515814861

Annular Hole Cutter Hss 38 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 38 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the twist ..

R 1,060.29

Ex VAT:R 921.99

Contact us

Stockist

Stock: 74 Model: TCAC038-2 UPC: 6009515814878

Annular Hole Cutter Hss 38 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 38 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 1,397.57

Ex VAT:R 1,215.28

Contact us

Stockist

Stock: 48 Model: TCAC040-1 UPC: 6009515814885

Annular Hole Cutter Hss 40 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 40 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 1,120.17

Ex VAT:R 974.06

Contact us

Stockist

Stock: 35 Model: TCAC040-2 UPC: 6009515814892

Annular Hole Cutter Hss 40 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 40 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 1,373.27

Ex VAT:R 1,194.15

Contact us

Stockist

Stock: 9 Model: TCAC042-1 UPC: 6009515828400

Annular Hole Cutter Hss 42 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 42 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 1,264.60

Ex VAT:R 1,099.65

Contact us

Stockist

Stock: 32 Model: TCAC042-2 UPC: 6009515828455

Annular Hole Cutter Hss 42 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 42 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 1,510.76

Ex VAT:R 1,313.70

Contact us

Stockist

Stock: 22 Model: TCAC044-1 UPC: 6009515828417

Annular Hole Cutter Hss 44 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 44 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 1,425.76

Ex VAT:R 1,239.79

Contact us

Stockist

Stock: 10 Model: TCAC044-2 UPC: 6009515828462

Annular Hole Cutter Hss 44 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 44 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 1,813.23

Ex VAT:R 1,576.72

Contact us

Stockist

Stock: 30 Model: TCAC045-1 UPC: 6009515828424

Annular Hole Cutter Hss 45 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: Ø 45 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the tw..

R 1,340.27

Ex VAT:R 1,165.45

Contact us

Stockist

Stock: 40 Model: TCAC045-2 UPC: 6009515828479

Annular Hole Cutter Hss 45 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: Ø 45 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is th..

R 1,783.29

Ex VAT:R 1,550.69