Model: SG COMP06-31
AirCraft Pressure Switch SG-COMP06-31
At a Glance: Pre-wired pressure switch with threaded connection for automatic compressor start/stop control.
The AirCraft SG-COMP06-31 Pressure Switch is the “brain stem” of many compressor setups—monitoring pressure and telling the compressor when to switch on and off.
When pressure drops to the cut-in point, it allows the compressor to start building pressure again; when the tank/system re..
R 216.20
Ex VAT:R 188.00
Model: SG COMP06-34
AirCraft Power Switch SG-COMP06-34
At a Glance: Panel-mount rocker power switch for dependable on/off control on compatible AirCraft equipment.
The AirCraft SG-COMP06-34 Power Switch is the simple, essential control that makes your compressor feel “normal” again—click on, click off, no surprises.
If your existing switch has become intermittent, loose, or refuses to latch, a fresh switch is often the fastest way to restore safe, c..
R 139.15
Ex VAT:R 121.00
Model: SG COMP06-45
AirCraft Non-Return Valve SG-COMP06-45
At a Glance: One-way check valve with threaded connection to stop air flowing back into the compressor line.
The AirCraft SG-COMP06-45 Non-Return Valve (also known as a check valve) is a small but crucial part in a compressor system.
Its job is simple and brilliant: it lets air flow in one direction and blocks it from flowing back the other way.
That means your system can build pressu..
R 206.43
Ex VAT:R 179.50
Model: SG COMP06-48
AirCraft Safety Valve SG-COMP06-48
At a Glance: Threaded pressure relief (safety) valve with pull-ring for manual testing and emergency pressure release.
The AirCraft SG-COMP06-48 Safety Valve is the “last line of defence” on a compressor system. When pressure rises beyond the safe limit, a safety valve is designed to open and vent excess pressure to help protect the tank, fittings, and nearby components.
It’s not just a spare pa..
R 136.28
Ex VAT:R 118.50
Model: SG COMP07
UPC: 6009515814120
Airbrush compressor
The compressor is designed for airbrush use. It will switch off when the tank is full and will switch on during use.
A filter and water trap is fitted to ensure the media in the airbrush isn't
contaminated with dust or water.
The oil-less piston motor is thermally protected and is maintenance free and
runs at a low noise ≤ 50dB.
The airbrush compressor is designed for artists who demand a quality finish.....
R 5,766.68
Ex VAT:R 5,014.50
Model: SG COMP08K
UPC: 6009515814137
AirCraft Compressor & Low Pressure Spray Gun Kit With Hose
At a Glance; Matched compressor and low pressure spray gun kit with hose for light spray finishing and touch-up work
When you need a practical spray setup without building a full-size compressor station, a matched kit can save a lot of hassle. The AirCraft SG-COMP08K Compressor & Low Pressure Spray Gun Kit With Hose combines a compact compressor with a compatible low pressur....
R 3,038.88
Ex VAT:R 2,642.50
Model: SG COMP09
UPC: 6009515816094
Airbrush compressor
The compressor is designed for airbrush use. It will switch off when the tank is full and will switch on during use.
An in-line filter and water trap is supplied with the 1.7m hose to ensure the media in the airbrush isn't
contaminated with dust or water. The filter needs to be fitted directly under
the airbrush.
The oil-less piston motor is thermally protected and is maintenance free and
runs at a low noise..
R 2,666.28
Ex VAT:R 2,318.50
Model: SG COMP09K
UPC: 6009515816414
Mini tyre inflator compressor
The compressor is designed to be small and compact using a 1/4 Hp motor to be able to inflate tyres up to a max pressure of 3.5 Bar (50 Psi).
The compressor is not suitable for airbrushing.....
R 2,852.58
Ex VAT:R 2,480.50
Model: SG COMP11
UPC: 6009515824723
12V Battery airbrush compressor
The compressor can be used for airbrushing, running from a supplied 12 V battery or from mains electricity.
Suitable for airbrushes with nozzle size Ø 0.2 - 0.5mm
Auto start stop function for continuous work, will maintain pressure at an
auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi
continuously.
Designed to be portable and fits in supplied waist bag.
Battery details:....
R 2,869.83
Ex VAT:R 2,495.50
Model: SG COMP12
UPC: 6009515824877
12V Battery airbrush compressor
The compressor can be used for airbrushing, running from a supplied 12 V battery or from mains electricity.
Suitable for airbrushes with nozzle size Ø 0.2 - 0.5mm
Auto start stop function for continuous work, will maintain pressure at an
auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi
continuously.
Designed to be portable and fits in supplied waist bag.
Battery details:....
R 3,094.65
Ex VAT:R 2,691.00
Model: SG COMP13
UPC: 6009515825393
AirCraft SG-COMP13 Mini Air Battery Compressor & A130 Airbrush Kit
At a Glance: All-in-one portable airbrush kit with battery mini compressor, A130 airbrush, paints, stencils and carry case.
The AirCraft SG-COMP13 is a compact, go-anywhere airbrush kit built for clean, controlled spraying without needing a big workshop compressor.
You get a battery-powered mini air compressor paired with an A130 airbrush, plus a handy select....
R 4,317.10
Ex VAT:R 3,754.00
Model: SG COMP13-1
UPC: 6009515889265
AirCraft Spare Battery Pack SG-COMP13-1 For SG-COMP13
At a Glance: Plug-in replacement battery pack for the AirCraft SG-COMP13—ideal for extended runtime and quick changeovers.
Keep your portable compressor doing what it does best—working where there’s no plug point. The AirCraft SG-COMP13-1 Spare Battery Pack is a replacement rechargeable battery pack made specifically for the SG-COMP13.
It’s the perfect backup for longer jobs,..
R 790.63
Ex VAT:R 687.50
Model: SG COMPSP-01
AirCraft Capacitor (Capacitance) SG-COMPSP-01 For Comp04 And Comp06
At a Glance: Motor run capacitor rated 4uF ±5% 450V AC for AirCraft Comp04 and Comp06.
The AirCraft SG-COMPSP-01 Capacitor (listed as “Capacitance”) is a key electrical component used to help the compressor motor run efficiently and reliably.
In many single-phase motors, a run capacitor supports correct phase shift and smoother motor operation—helping reduce str..
R 78.20
Ex VAT:R 68.00
Model: SG COMPSP-02
AirCraft Cylinder SG-COMPSP-02 For All Mini Compressors
At a Glance: Replacement cylinder sleeve for AirCraft mini compressors—helps restore strong compression and smooth pumping.
The AirCraft SG-COMPSP-02 Cylinder is a replacement cylinder sleeve used in AirCraft mini compressor units.
Inside a compressor, the cylinder is where the piston does its work—building pressure with each stroke. Over time, wear, scoring, heat, or conta..
R 89.24
Ex VAT:R 77.60
Model: SG COMPSP-03
AirCraft Pressure Switch SG-COMPSP-03 For Comp 04
At a Glance: Pre-wired replacement pressure switch for AirCraft Comp 04—controls automatic start/stop based on system pressure.
The AirCraft SG-COMPSP-03 Pressure Switch is a dedicated replacement pressure control switch for the AirCraft Comp 04.
Its job is to monitor pressure and manage the compressor’s automatic cycling: switching the compressor on when pressure drops (cut-in) ..
R 221.38
Ex VAT:R 192.50
Model: SG COMPSP-04
AirCraft Cylinder O-ring / Gasket Seal SG-COMPSP-04 For All Mini Compressors
At a Glance: Gasket-style sealing ring for the cylinder on AirCraft mini compressors—helps stop leaks and restore compression.
The AirCraft SG-COMPSP-04 Cylinder O-ring is best treated as a gasket seal: a sealing ring that sits at the cylinder interface to prevent air escaping where it shouldn’t.
On mini compressors, a tight cylinder seal is everything—i..
R 18.86
Ex VAT:R 16.40
Model: SG COMPSP-05
AirCraft Front And Rear Bearing SG-COMPSP-05 For All Mini Compressors
At a Glance: Replacement front and rear bearing set for AirCraft mini compressors—helps bring back smooth, quiet operation.
The AirCraft SG-COMPSP-05 Front And Rear Bearing set is a service replacement for AirCraft mini compressors, designed to support the rotating shaft/motor assembly and keep everything running smoothly.
Bearings do a tough job in a small com..
R 64.17
Ex VAT:R 55.80
Model: SG COMPSP-06
AirCraft Regulator and Filter for All Mini Comp 1/4" x 1/4" M (SG COMPSP-06)
At a Glance: Compact regulator + moisture filter with gauge, 1/4" x 1/4" male connections
The AirCraft SG COMPSP-06 Regulator and Filter is the simple upgrade that makes a mini compressor setup feel properly “dialled in”. It combines an adjustable pressure regulator with a moisture/filter bowl and an easy-to-read gauge, helping you deliver clean....
R 542.80
Ex VAT:R 472.00
Model: SG COMPSP-06A
AirCraft Regulator and Filter for All Mini Comp 1/4" x 1/8" M (SG COMPSP-06A)
At a Glance: Compact regulator + moisture filter with gauge, 1/4" x 1/8" male connections
The AirCraft SG COMPSP-06A Regulator and Filter is a compact, practical upgrade for mini compressor air lines where clean, stable air makes all the difference. It combines an adjustable pressure regulator with a moisture/filter bowl and an easy-to-read gau....
R 493.35
Ex VAT:R 429.00
Model: SG COMPSP-07
AirCraft Feet SG-COMPSP-07 For SG-COMP04 And SG-COMP05
At a Glance: Replacement anti-vibration foot for SG-COMP04/SG-COMP05—adds grip, stability and reduces vibration transfer.
The AirCraft SG-COMPSP-07 Feet are replacement anti-vibration compressor feet designed for the SG-COMP04 and SG-COMP05 mini compressor units.
A good compressor foot does three important jobs: it stabilises the machine, absorbs vibration, and protects the ..
R 18.86
Ex VAT:R 16.40
Model: SG COMPSP-08
CYLINDER HEAD BOLT FOR ALL MINI COMPRESSORS....
R 11.39
Ex VAT:R 9.90
Model: SG COMPSP-09
AirCraft Pressure Switch SG-COMPSP-09 For Comp 05, Comp06 And Comp07
At a Glance: Pre-wired replacement pressure switch for AirCraft Comp 05/Comp06/Comp07—controls automatic start/stop based on system pressure.
The AirCraft SG-COMPSP-09 Pressure Switch is a dedicated replacement pressure control switch for the AirCraft Comp 05, Comp06 and Comp07 mini compressor units.
This switch helps manage the compressor’s automatic cycling by..
R 214.48
Ex VAT:R 186.50
Model: SG COMPSP-10
AirCraft Power Switch SG-COMPSP-10 For Comp 05, Comp06 And Comp07
At a Glance: Panel-mount rocker power switch for AirCraft Comp 05/Comp06/Comp07—simple, dependable on/off control.
The AirCraft SG-COMPSP-10 Power Switch is a replacement rocker on/off switch designed for the AirCraft Comp 05, Comp06 and Comp07 mini compressor units.
When a switch starts failing, the symptoms are classic: intermittent power, a switch that won’t lat..
R 46.46
Ex VAT:R 40.40
Model: SG COMPSP-11
AirCraft Muffle (Muffler / Silencer) SG-COMPSP-11 For Comp 05, Comp06 And Comp07
At a Glance: Threaded compressor muffler/silencer with porous insert to help reduce operating noise on Comp 05/Comp06/Comp07.
The AirCraft SG-COMPSP-11 Muffle is a small but clever noise-control component—essentially a muffler/silencer used on the AirCraft Comp 05, Comp06 and Comp07 mini compressor range.
Fitted to the appropriate port (model depende..
R 28.29
Ex VAT:R 24.60
Model: SG COMPSP-12
AirCraft Solenoid Valve SG-COMPSP-12 For Comp 05, Comp06 And Comp07
At a Glance: Electrically actuated replacement solenoid valve with pre-wired leads for AirCraft Comp 05/Comp06/Comp07.
The AirCraft SG-COMPSP-12 Solenoid Valve is an electrically controlled air valve used on the AirCraft Comp 05, Comp06 and Comp07 mini compressor range.
A solenoid valve opens and closes an internal air passage when it receives an electrical signa..
R 570.40
Ex VAT:R 496.00
Model: SG COMPSP-13
AirCraft Safety Valve SG-COMPSP-13 For Comp06 And Comp07
At a Glance: Threaded pressure relief (safety) valve with pull-ring for manual testing and emergency pressure release.
The AirCraft SG-COMPSP-13 Safety Valve is a pressure relief valve designed for the AirCraft Comp06 and Comp07 mini compressors.
This is a safety-critical component: if pressure rises beyond the safe limit, the valve is designed to open and vent pressure—hel..
R 133.98
Ex VAT:R 116.50
Model: SG COMPSP-14
AirCraft Right Angle Coupling SG-COMPSP-14 For Comp06 And Comp07
At a Glance: 90° threaded right-angle coupling (male to female) for compact air line routing on Comp06/Comp07.
The AirCraft SG-COMPSP-14 Right Angle Coupling is a practical 90-degree elbow fitting designed for AirCraft Comp06 and Comp07 mini compressor assemblies.
When space is tight, a straight fitting can force hoses to bend sharply or sit awkwardly against the bo..
R 89.47
Ex VAT:R 77.80
Model: SG COMPSP-15
AirCraft Rear Splint Integration SG-COMPSP-15 For Comp 05 And Comp07
At a Glance: Rear plate / end plate assembly with an integrated sealing ring to help maintain alignment and prevent air leaks.
The AirCraft SG-COMPSP-15 Rear Splint Integration is a rear plate (end plate) component for the AirCraft Comp 05 and Comp07 mini compressor range.
This type of plate does two important jobs: it supports correct assembly alignment and it ..
R 134.55
Ex VAT:R 117.00
Model: SG COMPSP-16
AirCraft Motor SG-COMPSP-16 For SG-COMP05 And Comp07
At a Glance: Replacement motor for AirCraft mini compressors—built to bring back reliable power and smooth operation.
The AirCraft SG-COMPSP-16 Motor is a replacement motor designed for the AirCraft SG-COMP05 and Comp07 mini compressor range.
When a compressor starts struggling—slow start-ups, inconsistent running, unusual noise, overheating, or sudden stoppages—the motor is of..
R 3,712.78
Ex VAT:R 3,228.50
Model: SG CP01
UPC: 6009515814977
AirCraft Mini Paint Cleaning Pot
At a Glance; Mini airbrush cleaning pot for flushing paint and capturing overspray during cleaning
Airbrush cleaning is unavoidable—so it might as well be neat, safe, and low-drama. The AirCraft SG CP01 Mini Paint Cleaning Pot is a compact cleaning station designed to catch overspray and waste paint when you flush your airbrush between colours or at the end of a session. Instead of blasting cleaner and pigme..
R 936.68
Ex VAT:R 814.50
Model: SG CS15014
UPC: 6009515903565
AirCraft SG CS15014 Compounding Sponge 150mm x 50mm x M14 Orange Firm
At a Glance: 150mm firm orange foam compounding sponge with M14 x 2.0mm thread and reinforced backing pad.
The AirCraft SG CS15014 Compounding Sponge is a 150mm firm-density foam polishing and compounding sponge designed for paint correction, surface preparation and repair work. Its orange firm foam body makes it well suited to more demanding compounding tasks where stronge..
R 155.25
Ex VAT:R 135.00
Model: SG CS15014-1
UPC: 6009515903558
AirCraft SG CS15014-1 Compounding Sponge 150mm x 50mm x M14 White Medium
At a Glance: 150mm medium-density white foam compounding sponge with M14 x 2.0mm thread and reinforced backing pad.
The AirCraft SG CS15014-1 Compounding Sponge is a 150mm polishing and compounding sponge designed for paint correction, surface preparation and repair work. With its medium-density white foam body, this sponge offers a practical balance between polishing co..
R 202.98
Ex VAT:R 176.50
Model: SG CS15058
UPC: 6009515903589
AirCraft SG CS15058 Compounding Sponge 150mm x 50mm x 5/8-11" White Medium
At a Glance: 150mm medium-density white foam compounding sponge with 5/8-11" thread and reinforced backing pad.
The AirCraft SG CS15058 Compounding Sponge is a 150mm white medium-density foam sponge designed for polishing, compounding, paint preparation and surface repair work. It is a practical accessory for automotive detailing, manufacturing environments, ....
R 223.68
Ex VAT:R 194.50
Model: SG CUT01
UPC: 6009515889302
AirCraft PU Tube Cutter (SG CUT01)
At a Glance: Clean, square cuts for PU pneumatic tubing to help prevent leaks
The AirCraft SG CUT01 PU Tube Cutter is the small tool that saves you from big pneumatic headaches. Clean, square tube cuts are essential for push-in fittings to seal properly—angled or crushed ends can cause frustrating leaks and weak connections. This compact cutter is designed to slice PU pneumatic tubing neatly and accurately..
R 44.39
Ex VAT:R 38.60
Model: SG DTC-10
UPC: 6009515903961
Dual Head 2-Way Tyre Chuck
Inlet: 1/8"F - BSP
Max valve diameter: 8mm
The Dual Head 2-Way Tyre Chuck is a versatile tool designed to efficiently inflate two tires simultaneously.
Equipped with two independent 1/8"F quick connect fittings, this chuck allows for rapid connection and disconnection
of air hoses, saving valuable time during tire inflation. Its compact and durable design makes it ideal for both
professi....
R 41.40
Ex VAT:R 36.00
Model: SG DTC-10P
UPC: 6009515903978
AirCraft Dual-Head Tyre Chuck – 1/8" (2-Way) (Carded) (SG-DTC-10P)
At a Glance: Dual-head 2-way tyre chuck with a 1/8" connection for easier access to tyre valves from different angles.
Tyre inflation gets a whole lot easier when you can actually reach the valve properly. The AirCraft SG-DTC-10P dual-head tyre chuck is a practical 2-way inflator chuck designed to grip Schrader-style tyre valves securely while giving you better access ....
R 45.08
Ex VAT:R 39.20
Model: SG DTC-12
UPC: 6009515818173
Heavy duty tyre chuck
The heavy duty dual head tyre chuck is fitted with a rubber grip and is ideal
to inflate tyres in hard to reach places.
Hose tail for Ø 8mm ID hose....
R 91.54
Ex VAT:R 79.60
Model: SG E240
UPC: 6009515816520
AirCraft Airbrush Spray Booth With Extractor
At a Glance; Portable airbrush spray booth with extractor to help remove overspray and paint mist
Airbrushing indoors is amazing right up until everything within five metres gets a fine, mysterious dusting of colour. The AirCraft SG-E240 Airbrush Spray Booth With Extractor is designed to make indoor and bench-top spraying cleaner and more controlled. This portable booth helps capture overspray an..
R 2,577.73
Ex VAT:R 2,241.50
Model: SG E240-01
UPC: 6009515884116
AirCraft Filter For Spray Booth
At a Glance; Replacement overspray filter for the AirCraft SG-E240 airbrush spray booth
A spray booth extractor is only as effective as the filter sitting in front of it. The AirCraft SG-E240-01 Filter is a replacement overspray filter designed for the AirCraft SG-E240 airbrush spray booth. It helps capture airborne paint mist and overspray particles before they reach the extractor, supporting better airflow,..
R 103.27
Ex VAT:R 89.80
Model: SG EC11-13
UPC: 6009515903695
Double Ear Clamp
Diameter: 11 - 13mm
This high-quality Double Ear Clamp is a versatile and reliable fastener designed for secure connections. Constructed
from durable carbon steel, it offers excellent strength and is suitable for a wide range of applications. Its unique
double-ear design provides a strong and even clamping force, ensuring a reliable seal and preventing leaks in hoses
and tubing. This clamp is ideal for u..
R 6.33
Ex VAT:R 5.50
Model: SG EC13-15
UPC: 6009515903701
Double Ear Clamp
Diameter: 13 - 15mm
This high-quality Double Ear Clamp is a versatile and reliable fastener designed for secure connections. Constructed
from durable carbon steel, it offers excellent strength and is suitable for a wide range of applications. Its unique
double-ear design provides a strong and even clamping force, ensuring a reliable seal and preventing leaks in hoses
and tubing. This clamp is ideal for u..
R 8.40
Ex VAT:R 7.30
Model: SG EC15-18
UPC: 6009515903718
Double Ear Clamp
Diameter: 15 - 18mm
This high-quality Double Ear Clamp is a versatile and reliable fastener designed for secure connections. Constructed
from durable carbon steel, it offers excellent strength and is suitable for a wide range of applications. Its unique
double-ear design provides a strong and even clamping force, ensuring a reliable seal and preventing leaks in hoses
and tubing. This clamp is ideal for u..
R 8.63
Ex VAT:R 7.50
Model: SG EC17-20
UPC: 6009515903725
Double Ear Clamp
Diameter: 17 - 20mm
This high-quality Double Ear Clamp is a versatile and reliable fastener designed for secure connections. Constructed
from durable carbon steel, it offers excellent strength and is suitable for a wide range of applications. Its unique
double-ear design provides a strong and even clamping force, ensuring a reliable seal and preventing leaks in hoses
and tubing. This clamp is ideal for u..
R 10.81
Ex VAT:R 9.40
Model: SG EC9-11
UPC: 6009515903688
Double Ear Clamp
Diameter: 9 - 11mm
This high-quality Double Ear Clamp is a versatile and reliable fastener designed for secure connections. Constructed
from durable carbon steel, it offers excellent strength and is suitable for a wide range of applications. Its unique
double-ear design provides a strong and even clamping force, ensuring a reliable seal and preventing leaks in hoses
and tubing. This clamp is ideal for us..
R 6.56
Ex VAT:R 5.70
Model: SG F01
UPC: 6009600408975
In-line filter for spray guns
The filter can be directly connected to the spray gun to filter out dust and oil in the air.
It is mainly suitable for spray guns using compressed air as it needs to be
positioned upright to function properly.
Easy to drain valve located on the bottom.
Supplied in hanging box.
Thread: 1/4 BSP....
R 119.03
Ex VAT:R 103.50
Model: SG F02
UPC: 6009515814182
In-line filter for airbrushes
The filter can be directly connected to the airbrush to filter out dust and oil in the air.
The shape of the filter allows you to hold it located in your palm and by doing so, improves the comfort of holding the airbrush.
Easy to drain valve located on the bottom.
Filters out contaminants that could mix with the media in the airbrush.
Thread: 1/8 BSP
Filter element: 5 micron....
R 181.70
Ex VAT:R 158.00
Model: SG F180-1
UPC: 6009515817657
In-line filter 1/4 BSP
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Manual
A push-in fitting is located on the drain to allow fluid to drain to a
central point via PU tubing (not included).....
R 354.20
Ex VAT:R 308.00
Model: SG F180-1-1
UPC: 6009515850708
Spare bracket to mount SG F180 filter
This is a spare bracket for the SG F180 filters to mount it to a wall.....
R 119.03
Ex VAT:R 103.50
Model: SG F180-2
UPC: 6009515817756
In-line filter 1/4 BSP
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain....
R 1,097.10
Ex VAT:R 954.00
Model: SG F200-1
UPC: 6009515817664
In-line filter 1/2 BSP
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Manual
A push-in fitting is located on the drain to allow fluid to drain to a
central point via PU tubing (not included).....
R 629.63
Ex VAT:R 547.50