Tork Craft Products

Stock: 209 Model: TCAC019-1 UPC: 6009515814564

Annular Hole Cutter Hss 19 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 19 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 419.23

Ex VAT:R 364.55

Contact us

Stockist

Annular Hole Cutter Hss 19 X 55mm Weld Shank 19.05mm

In Stock Soon

Stock: In Stock Soon Model: TCAC019-2 UPC: 6009515814571

Annular Hole Cutter Hss 19 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 18 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 590.03

Ex VAT:R 513.07

New Expected Date :

15/02/2026
15/03/2026

Contact us

Stockist

Stock: 427 Model: TCAC020-1 UPC: 6009515814588

Annular Hole Cutter Hss 20 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 20 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 457.99

Ex VAT:R 398.25

Contact us

Stockist

Stock: 193 Model: TCAC020-2 UPC: 6009515814595

Annular Hole Cutter Hss 20 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 20 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 603.46

Ex VAT:R 524.75

Contact us

Stockist

Stock: 33 Model: TCAC020-3 UPC: 6009515895082

Annular Hole Cutter Tct 20 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 20 × 35 mm, 19.05 mm (3/4") Weldon Size: 20 mm x 35 mm [3/4" Weldon Shank] This 20 mm TCT annular cutter brings high-efficiency broaching through steel, structural plate and cast iron. With a 35 mm cutting depth, tungsten-carbide-tipped teeth and a rugged 19.05 mm (3/4″) Weldon shank, it’s designed for use in magnetic-base drills and heavy duty production settings where accuracy, speed and tool-life are essential.....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 32 Model: TCAC020-4 UPC: 6009515895099

Annular Hole Cutter Tct 20 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 20 × 55 mm, 19.05 mm (3/4") Weldon Size: 20 mm x 55 mm [3/4" Weldon Shank] This 20 mm TCT annular cutter brings high-efficiency broaching through steel, structural plate and cast iron. With a 55 mm cutting depth, tungsten-carbide-tipped teeth and a rugged 19.05 mm (3/4″) Weldon shank, it’s designed for use in magnetic-base drills and heavy duty production settings where accuracy, speed and tool-life are essential.....

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 38 Model: TCAC021-1 UPC: 6009515814601

Annular Hole Cutter Hss 21 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 21 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 460.52

Ex VAT:R 400.45

Contact us

Stockist

Annular Hole Cutter Hss 21 X 55mm Weld Shank 19.05mm

In Stock Soon

Stock: In Stock Soon Model: TCAC021-2 UPC: 6009515814618

Annular Hole Cutter Hss 21 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 21 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 611.74

Ex VAT:R 531.95

New Expected Date :

15/03/2026
15/04/2026

Contact us

Stockist

Stock: 1220 Model: TCAC022-1 UPC: 6009515814625

Annular Hole Cutter Hss 22 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 22 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 512.61

Ex VAT:R 445.75

Contact us

Stockist

Stock: 107 Model: TCAC022-2 UPC: 6009515814632

Annular Hole Cutter Hss 22 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 22 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 644.69

Ex VAT:R 560.60

Contact us

Stockist

Stock: 86 Model: TCAC022-3 UPC: 6009515895105

Annular Hole Cutter Tct 22 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 22 × 35 mm, 19.05 mm (3/4") Weldon Size: 22 mm x 35 mm [3/4" Weldon Shank] The 22 mm TCT annular cutter removes only a thin ring of material for quicker holes, lower feed pressure and a cleaner finish. Carbide-tipped teeth stay sharp in demanding steels, while the robust 19.05 mm (3/4″) Weldon shank provides secure, slip-free drive in most magnetic-base drills and compatible arbors.....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 1 Model: TCAC022-4 UPC: 6009515895112

Annular Hole Cutter Tct 22 X 55mm Weld Shank 19.05m

Tork Craft Annular Hole Cutter — TCT 22 × 55 mm, 19.05 mm (3/4") Weldon Size: 22 mm x 55 mm [3/4" Weldon Shank] The 22 mm TCT annular cutter removes only a thin ring of material for quicker holes, lower feed pressure and a cleaner finish. Carbide-tipped teeth stay sharp in demanding steels, while the robust 19.05 mm (3/4″) Weldon shank provides secure, slip-free drive in most magnetic-base drills and compatible arbors.....

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 68 Model: TCAC023-1 UPC: 6009515817510

Annular Hole Cutter Hss 23 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 23 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 507.50

Ex VAT:R 441.30

Contact us

Stockist

Stock: 62 Model: TCAC023-2 UPC: 6009515817527

Annular Hole Cutter Hss 23 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 23 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 685.98

Ex VAT:R 596.50

Contact us

Stockist

Stock: 281 Model: TCAC024-1 UPC: 6009515814649

Annular Hole Cutter Hss 24 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 24 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 552.46

Ex VAT:R 480.40

Contact us

Stockist

Stock: 165 Model: TCAC024-2 UPC: 6009515814656

Annular Hole Cutter Hss 24 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 24 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 749.17

Ex VAT:R 651.45

Contact us

Stockist

Stock: 11 Model: TCAC024-3 UPC: 6009515895129

Annular Hole Cutter Tct 24 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 24 × 35 mm, 19.05 mm (3/4") Weldon Size: 24 mm x 35 mm [3/4" Weldon Shank] This 24 mm TCT annular cutter is designed for fast, accurate holes through structural steel, plate and cast-iron. The tungsten-carbide-tipped teeth and thin-wall construction deliver high performance while the 19.05 mm (3/4") Weldon shank ensures firm drive engagement in magnetic drills and compatible arbors.....

R 777.61

Ex VAT:R 676.18

Contact us

Stockist

Stock: 55 Model: TCAC024-4 UPC: 6009515895136

Annular Hole Cutter Tct 24 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 24 × 55 mm, 19.05 mm (3/4") Weldon Size: 24 mm x 55 mm [3/4" Weldon Shank] This 24 mm TCT annular cutter is designed for fast, accurate holes through structural steel, plate and cast-iron. The tungsten-carbide-tipped teeth and thin-wall construction deliver high performance while the 19.05 mm (3/4") Weldon shank ensures firm drive engagement in magnetic drills and compatible arbors.....

R 879.76

Ex VAT:R 765.01

Contact us

Stockist

Stock: 124 Model: TCAC025-1 UPC: 6009515814663

Annular Hole Cutter Hss 25 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 25 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 542.97

Ex VAT:R 472.15

Contact us

Stockist

Stock: 54 Model: TCAC025-2 UPC: 6009515814670

Annular Hole Cutter Hss 25 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 25 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 776.65

Ex VAT:R 675.35

Contact us

Stockist

Stock: 359 Model: TCAC026-1 UPC: 6009515814687

Annular Hole Cutter Hss 26 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 26 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 641.07

Ex VAT:R 557.45

Contact us

Stockist

Stock: 261 Model: TCAC026-2 UPC: 6009515814694

Annular Hole Cutter Hss 26 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 26 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 804.20

Ex VAT:R 699.30

Contact us

Stockist

Stock: 24 Model: TCAC026-3 UPC: 6009515895143

Annular Hole Cutter Tct 26 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 26 × 35 mm, 19.05 mm (3/4") Weldon Size: 26 mm x 35 mm [3/4" Weldon Shank] The 26 mm TCT annular cutter by Tork Craft is designed for robust performance in steel and cast-iron drilling. With a 35 mm cutting depth and a secure 19.05 mm (3/4") Weldon shank, it delivers fast, clean holes while minimising feed pressure and burr formation.....

R 828.68

Ex VAT:R 720.59

Contact us

Stockist

Stock: 20 Model: TCAC026-4 UPC: 6009515895150

Annular Hole Cutter Tct 26 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 26 × 55 mm, 19.05 mm (3/4") Weldon Size: 26 mm x 55 mm [3/4" Weldon Shank] The 26 mm TCT annular cutter by Tork Craft is designed for robust performance in steel and cast-iron drilling. With a55 mm cutting depth and a secure 19.05 mm (3/4") Weldon shank, it delivers fast, clean holes while minimising feed pressure and burr formation.....

R 926.43

Ex VAT:R 805.59

Contact us

Stockist

Stock: 57 Model: TCAC027-1 UPC: 6009515814700

Annular Hole Cutter Hss 27 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 27 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 641.07

Ex VAT:R 557.45

Contact us

Stockist

Stock: 22 Model: TCAC027-2 UPC: 6009515814717

Annular Hole Cutter Hss 27 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 27 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 925.55

Ex VAT:R 804.83

Contact us

Stockist

Stock: 94 Model: TCAC028-1 UPC: 6009515814724

Annular Hole Cutter Hss 28 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 28 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 584.20

Ex VAT:R 508.00

Contact us

Stockist

Stock: 88 Model: TCAC028-2 UPC: 6009515814731

Annular Hole Cutter Hss 28 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 28 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 823.40

Ex VAT:R 716.00

Contact us

Stockist

Stock: 33 Model: TCAC028-3 UPC: 6009515895167

Annular Hole Cutter Tct 28 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 28 × 35 mm, 19.05 mm (3/4") Weldon Size: 28 mm x 35 mm [3/4" Weldon Shank] The 28 mm diameter TCT annular cutter from Tork Craft is engineered for high-efficiency hole making in steel and cast-iron. With a 35 mm cutting depth and a rugged 19.05 mm (3/4″) Weldon shank, this tool delivers fast, clean broaches with minimal burrs and reduced feed pressure — ideal for workshop or site use.....

R 828.68

Ex VAT:R 720.59

Contact us

Stockist

Stock: 31 Model: TCAC028-4 UPC: 6009515895174

Annular Hole Cutter Tct 28 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 28 × 55 mm, 19.05 mm (3/4") Weldon Size: 28 mm x 55 mm [3/4" Weldon Shank] The 28 mm diameter TCT annular cutter from Tork Craft is engineered for high-efficiency hole making in steel and cast-iron. With a 55 mm cutting depth and a rugged 19.05 mm (3/4″) Weldon shank, this tool delivers fast, clean broaches with minimal burrs and reduced feed pressure — ideal for workshop or site use.....

R 926.43

Ex VAT:R 805.59

Contact us

Stockist

Stock: 124 Model: TCAC030-1 UPC: 6009515814748

Annular Hole Cutter Hss 30 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 30 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 680.46

Ex VAT:R 591.70

Contact us

Stockist

Stock: 116 Model: TCAC030-2 UPC: 6009515814755

Annular Hole Cutter Hss 30 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 30 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 892.17

Ex VAT:R 775.80

Contact us

Stockist

Stock: 33 Model: TCAC030-3 UPC: 6009515895181

Annular Hole Cutter Tct 30 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 30 × 35 mm, 19.05 mm (3/4") Weldon Size: 30 mm x 35 mm [3/4" Weldon Shank] The 30 mm diameter TCT annular cutter from Tork Craft is engineered to deliver high-efficiency holes in structural steel, plate and cast-iron. With a 35 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it creates clean, burr-reduced holes with less feed force — ideal for repetitive industrial drilling.....

R 828.68

Ex VAT:R 720.59

Contact us

Stockist

Stock: 56 Model: TCAC030-4 UPC: 6009515895198

Annular Hole Cutter Tct 30 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 30 × 55 mm, 19.05 mm (3/4") Weldon Size: 30 mm x 55 mm [3/4" Weldon Shank] The 30 mm diameter TCT annular cutter from Tork Craft is engineered to deliver high-efficiency holes in structural steel, plate and cast-iron. With a 55 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it creates clean, burr-reduced holes with less feed force — ideal for repetitive industrial drilling.....

R 926.43

Ex VAT:R 805.59

Contact us

Stockist

Stock: 42 Model: TCAC031-1 UPC: 6009515814762

Annular Hole Cutter Hss 31 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 31 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 833.08

Ex VAT:R 724.42

Contact us

Stockist

Stock: 37 Model: TCAC031-2 UPC: 6009515814779

Annular Hole Cutter Hss 31 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — HSS 31 × 55 mm, 19.05 mm (3/4") Weldon Size: 31 mm x 55 mm [3/4" Weldon Shank] The 31 mm HSS annular cutter from Tork Craft delivers high-performance broaching for steel and cast-iron. With a 55 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, this tool is built to produce clean, burr-reduced holes efficiently while minimizing feed pressure and maximising machine life.....

R 740.95

Ex VAT:R 644.30

Contact us

Stockist

Stock: 155 Model: TCAC032-1 UPC: 6009515814786

Annular Hole Cutter Hss 32 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 32 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 795.92

Ex VAT:R 692.10

Contact us

Stockist

Stock: 271 Model: TCAC032-2 UPC: 6009515814793

Annular Hole Cutter Hss 32 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 32 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 840.31

Ex VAT:R 730.70

Contact us

Stockist

Stock: 28 Model: TCAC032-3 UPC: 6009515895204

Annular Hole Cutter Tct 32 X 35mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 32 × 35 mm, 19.05 mm (3/4") Weldon Size: 32 mm x 35 mm [3/4" Weldon Shank] The 32 mm TCT annular cutter removes only a thin ring of material for quicker holes, smoother finishes and lower feed force. Carbide-tipped teeth maintain speed and edge retention in demanding steels, while the 19.05 mm (3/4″) Weldon shank gives a secure, slip-free drive in most magnetic-base drills and compatible arbors.....

R 1,022.42

Ex VAT:R 889.06

Contact us

Stockist

Stock: 6 Model: TCAC032-4 UPC: 6009515895211

Annular Hole Cutter Tct 32 X 55mm Weld Shank 19.05mm

Tork Craft Annular Hole Cutter — TCT 55 × 35 mm, 19.05 mm (3/4") Weldon Size: 55 mm x 35 mm [3/4" Weldon Shank] The 55 mm TCT annular cutter removes only a thin ring of material for quicker holes, smoother finishes and lower feed force. Carbide-tipped teeth maintain speed and edge retention in demanding steels, while the 19.05 mm (3/4″) Weldon shank gives a secure, slip-free drive in most magnetic-base drills and compatible arbors.....

R 1,175.66

Ex VAT:R 1,022.31

Contact us

Stockist

Stock: 48 Model: TCAC033-1 UPC: 6009515814809

Annular Hole Cutter Hss 33 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 33 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 804.20

Ex VAT:R 699.30

Contact us

Stockist

Stock: 47 Model: TCAC033-2 UPC: 6009515814816

Annular Hole Cutter Hss 33 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 33 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 927.88

Ex VAT:R 806.85

Contact us

Stockist

Stock: 55 Model: TCAC034-1 UPC: 6009515842598

Annular Hole Cutter Hss 34 X 30mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER HSS 34 X 30MM WELD SHANK 19.05MM....

R 817.94

Ex VAT:R 711.25

Contact us

Stockist

Stock: 36 Model: TCAC034-2 UPC: 6009515842604

Annular Hole Cutter Hss 34 X 55mm Weld Shank 19.05mm

ANNULAR HOLE CUTTER HSS 34 X 55MM WELD SHANK 19.05MM....

R 960.88

Ex VAT:R 835.55

Contact us

Stockist

Stock: 13 Model: TCAC035-1 UPC: 6009515814823

Annular Hole Cutter Hss 35 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 35 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 845.42

Ex VAT:R 735.15

Contact us

Stockist

Stock: 31 Model: TCAC035-2 UPC: 6009515814830

Annular Hole Cutter Hss 35 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 35 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 1,098.37

Ex VAT:R 955.10

Contact us

Stockist

Stock: 110 Model: TCAC036-1 UPC: 6009515814847

Annular Hole Cutter Hss 36 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 36 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist dril..

R 864.63

Ex VAT:R 751.85

Contact us

Stockist

Stock: 136 Model: TCAC036-2 UPC: 6009515814854

Annular Hole Cutter Hss 36 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 36 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 1,208.31

Ex VAT:R 1,050.70

Contact us

Stockist

Stock: 58 Model: TCAC038-1 UPC: 6009515814861

Annular Hole Cutter Hss 38 X 30mm Weld Shank 19.05mm

Annular Cutters 30mm Annular Cutter: &O/; 38 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist drill&s ..

R 1,060.29

Ex VAT:R 921.99

Contact us

Stockist

Stock: 73 Model: TCAC038-2 UPC: 6009515814878

Annular Hole Cutter Hss 38 X 55mm Weld Shank 19.05mm

Annular Cutters 55mm long Annular Cutter: &O/; 38 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal . of these concerns is the twist ..

R 1,397.57

Ex VAT:R 1,215.28