Menu
Your Cart

Wire End Brush 12mm x 6mm Shaft Max 4500 RPM

Wire End Brush 12mm x 6mm Shaft Max 4500 RPM
Wire End Brush 12mm x 6mm Shaft Max 4500 RPM
  • Brand: TORK CRAFT
  • Model: TCWE1206
  • Weight: 0.02kg
  • Dim: 66 mm x 130 mm x 130 mm
  • UPC: 6009515805937
Price:
R 45.08
Ex VAT: R 39.20

Available Options

Tork Craft Wire End Brush 12mm x 6mm Shaft For Drill Max 4500 RPM

At a Glance: Brass coated steel wire end brush for use with a drill, featuring a 12mm minimum brush diameter, up to 16mm maximum working diameter, 6mm steel shank and a maximum operating speed of 4500 RPM

The Tork Craft TCWE1206 Wire End Brush is a compact rotary brush designed for use with a suitable drill for cleaning, surface preparation and detail work. Its end-brush format makes it particularly useful for reaching into confined areas, holes, recesses, corners and other locations where larger wire brushes may not fit. The brush uses brass coated steel wire bristles with a 0.28mm wire thickness and is mounted on a 6mm steel shank for secure fitting in a compatible drill chuck.

Compact wire end brush for drill use – maximum 4500 RPM

Wire end brushes concentrate the bristles into a relatively small working area, making them useful for targeted cleaning and surface preparation. The TCWE1206 has a minimum brush diameter of 12mm and can expand during operation to a maximum working diameter of approximately 16mm. Always operate the brush within its stated maximum speed of 4500 RPM.

Product highlights

  • For drill use Designed for fitting into a compatible drill chuck via its 6mm shank.
  • Maximum 4500 RPM Do not operate this brush above its rated maximum speed.
  • 12mm minimum brush diameter Compact size for detailed and confined-area cleaning.
  • Up to 16mm maximum brush diameter Bristles can expand during operation.
  • 0.28mm wire thickness Brass coated steel wire bristles for effective surface cleaning.
  • 6mm steel shank Suitable for compatible drill chucks.
  • End brush profile Useful for recesses, holes, corners and targeted cleaning work.

Features

  • Brass coated steel wire bristles Designed for effective mechanical surface cleaning.
  • 12mm minimum brush diameter Compact working profile for detailed applications.
  • 16mm maximum brush diameter Allows for normal bristle expansion during operation.
  • 0.28mm wire thickness Provides an effective balance between cleaning action and flexibility.
  • 6mm steel shank Fits compatible drill chucks securely.
  • Galvanised body Provides a durable finished brush body.
  • 4500 RPM maximum speed Rated specifically for controlled drill use within this limit.
  • Blister packed Supplied individually for easy storage and identification.

Benefits

  • Access confined areas: The compact end-brush shape can reach into recesses and smaller spaces.
  • Effective surface cleaning: Steel wire bristles help remove loose rust, corrosion, scale and surface contamination.
  • Controlled detail work: The smaller working area allows more targeted cleaning than larger wheel or cup brushes.
  • Convenient drill mounting: The 6mm shank fits directly into compatible drill chucks.
  • Versatile workshop use: Useful for metal preparation, maintenance, restoration and general cleaning tasks.

Application

  • For use with compatible electric or cordless drills
  • Removing loose rust and corrosion
  • Cleaning metal surfaces and components
  • Removing scale, oxidation and surface deposits
  • Cleaning inside recesses, holes and confined areas
  • Surface preparation before finishing or coating
  • Workshop, automotive, maintenance and fabrication applications

Extra Information

  • IMPORTANT: Maximum operating speed is 4500 RPM.
  • This version is intended for use with a suitable drill and should not be used in high-speed die grinders.
  • Always check the drill speed setting before starting work.
  • The brush has a minimum diameter of 12mm and may expand up to approximately 16mm during operation.
  • Allow the wire tips to do the work; excessive pressure can bend the wires and shorten brush life.
  • The 6mm shank must be fully and securely clamped in the drill chuck before use.
  • Wire brushes are consumable accessories and will gradually wear during normal operation.

Pro Tips

  • Start the drill at a lower speed and increase gradually while remaining below 4500 RPM.
  • Use light, controlled pressure rather than forcing the brush against the workpiece.
  • Keep the brush moving across the surface for a more even cleaning result.
  • For small recesses or internal areas, allow only the bristle tips to contact the workpiece.
  • Inspect the brush before every use and replace it if wires are excessively worn, damaged or loose.

How to Use

  • Disconnect or switch off the drill before fitting the brush.
  • Insert the 6mm shank fully into the drill chuck.
  • Tighten the chuck securely around the shank.
  • Confirm that the drill speed will not exceed 4500 RPM.
  • Wear suitable eye, face and hand protection before starting.
  • Start the drill away from the workpiece and allow the brush to reach operating speed.
  • Bring the brush gently into contact with the surface.
  • Use light pressure and allow the wire tips to perform the cleaning action.
  • Move the brush steadily across the required area without forcing it.
  • Switch off the drill and allow the brush to stop completely before setting the tool down.

Safety

  • Use in a compatible drill and never exceed the maximum speed marked on the brush or packaging.
  • Wear eye protection, a face shield, hearing protection and suitable dust protection for the task. Wire brushes can eject loose wires and debris.
  • Disconnect the power or remove the battery before fitting, adjusting or removing the brush.
  • Ensure the 6mm shaft is securely clamped in the chuck and the accessory runs correctly before contacting the workpiece.
  • Operate in rotary drilling mode with hammer or percussion action switched off.
  • Secure the workpiece and maintain firm control of the drill throughout use.
  • Keep hands, loose clothing, jewellery and long hair clear of the rotating brush.
  • Keep bystanders away from the work area and out of the path of flying debris.
  • Use light pressure and avoid forcing the brush into spaces where it may catch.
  • Stop immediately if the brush vibrates excessively, becomes loose or sheds an unusual amount of wire.
  • Do not use a brush with a bent shaft, damaged holder, loose wire bundle or excessive wear.
  • Keep sparks and debris away from flammable materials.
  • Wait until the brush stops completely before setting the drill down or touching the accessory.

Specifications

Description Spec
Brand Tork Craft
Cat No. TCWE1206
Product Type Wire End Brush
Brush Minimum Diameter 12mm
Brush Maximum Diameter 16mm
Shank Diameter 6mm
Wire Thickness 0.28mm
Maximum Speed 4500 RPM
Shank Material Steel
Bristle Material Brass Coated Steel Wire
Body Finish Galvanised
Recommended Tool Compatible Drill
Package Type Blister
Sales Unit Each
Country Of Origin Republic Of China (PRC)
Warranty Consumable Products Excluded From Warranty Unless Confirmed Production Error
Application Cleaning, Rust Removal And Surface Preparation
Tool Type Rotary Wire Brush Accessory
Suitable For Compatible Drills With 6mm Shank Capacity

In the box:

  • 1 x Tork Craft Wire End Brush 12mm x 6mm Shaft
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy