Blade Contractor 180 X 24t 20/16 Circular Saw Tct

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCP18024
Weight: 0.35kg
Pack Dim: 242.00mm x 40.00mm x 6.00mm
UPC: 6009515823368

Price:

R 182.39

Ex VAT: R 158.60

Available Options

Stockist

Tork Craft Contractor TCT Circular Saw Blade 180mm × 24T × 20/16mm

Highlights: 180mm diameter Contractor Series TCT blade with 24 precision-tipped teeth, 20/16mm bore and robust build for dependable site or workshop cutting

The Tork Craft Contractor TCT Circular Saw Blade 180mm × 24T × 20/16mm belongs to the Contractor Series — a pro-grade blade designed for tradespeople who demand reliable performance. With 24 tungsten carbide-tipped teeth, it delivers strong, consistent cuts in softwoods, hardwoods and wood-based panels under real-world conditions.

Supplied with a 20mm bore and a 16mm reducing bush, this blade fits a wide array of circular saws used in both site and workshop settings. The 180mm size gives you extra cutting depth while maintaining manageable tool size, making it suitable for trimming, sizing, cross-cutting and general job-site tasks where reliability counts.

What is the Tork Craft Contractor Series TCT circular saw blade?

The Tork Craft Contractor Series TCT circular saw blade is a professional-grade tool range engineered for trades, builders and carpenters who expect consistent, durable cutting performance day in and day out. These blades are built to handle tough materials, frequent cuts and demanding environments — not an entry or economy variant, but a work-horse you can trust.

Extra Information

Ideal for contractors, carpenters, joinery teams and site crews who demand dependable, trade-grade cutting blades.
Recommended for materials including softwoods, many hardwoods (check specific suitability), plywood, chipboard and common wood-based panels.
Ensure your circular saw is rated for 180mm blades and check that the bore size and maximum RPM match before use.
To extend blade life: avoid forcing the cut, keep the blade free of resin/pitch buildup, ensure saw base plate and fence are in alignment, and store the blade properly when not in use.

Pro Tip

When sizing sheet goods or plank timber on site, clamp a straight edge guide for stability, begin with a shallow starter pass and follow with a full-depth cut. With your Contractor Series blade this method gives you straighter, cleaner edges with less wreck-repair or minute sanding afterwards.

Features

180mm diameter blade Adds depth for cutting thicker stock or panels while still being practical on many site saws.
24T carbide-tipped teeth Tooth configuration offering a solid balance between cutting speed and finish quality for general tasks.
20/16mm bore configuration Standard 20mm bore with a 16mm reducing bush to increase compatibility across circular saw arbor sizes.
Contractor Series build quality Designed and manufactured for reliability and repeat use in demanding work environments.
General-purpose tooth geometry Suited for both ripping and cross-cutting typical construction and workshop materials.

Benefits

Reliable on-site performance: Built for the rigours of trade work, giving you consistent cuts and fewer surprises.
Efficient cutting: The 24-tooth design allows a faster feed rate while still producing acceptable edge quality for many practical uses.
Flexible fitment: 20/16mm bore setup means less hassle when fitting into different saws across your tool set.
Quality finish you can count on: Carbide-tipped teeth and the Contractor-level construction ensure the blade stays sharp, cuts true and keeps moving.

Safety

Wear eye, ear and dust protection when cutting to protect against flying chips, noise and fine dust.
Always disconnect the saw from its power source before fitting, adjusting or removing the blade.
Ensure the blade is mounted correctly, that the rotation arrow matches the saw’s direction of travel, and that all flanges and guards are secure.
Use a stable support for the workpiece, keep hands clear of the cutting line, and avoid binding or kick-back situations.
Allow the blade to reach full speed before entering the cut, and only set the saw down when the blade has stopped completely.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCP18024
Product Type	Contractor Series TCT circular saw blade
Blade Diameter	180mm
Number of Teeth	24T (tungsten carbide-tipped)
Bore Size	20mm bore with 16mm reducing bush
Kerf	2.3mm (typical)
Recommended Materials	Softwood, selected hardwoods, plywood and wood-based panels
Typical Applications	General-purpose cutting, trimming, sizing on site or in workshop