Menu
Your Cart

Tork Craft Flap Sanding Disc 76mm x 10mm 80 Grit Flat

Tork Craft Flap Sanding Disc 76mm x 10mm 80 Grit Flat
Tork Craft Flap Sanding Disc 76mm x 10mm 80 Grit Flat
  • Brand: TORK CRAFT
  • Model: TCFD076-80
  • UPC: 6009515918019
Price:
R 22.22
Ex VAT: R 19.32

Available Options

Tork Craft Flap Sanding Disc 76mm x 10mm 80 Grit Flat

At a Glance: 76mm flat flap sanding disc with 80 grit aluminium oxide abrasive, fibreglass backing, 10mm arbour, 48 abrasive flaps and maximum speed of 20,000 RPM

The Tork Craft TCFD076-80 Flap Sanding Disc is a compact 76mm abrasive disc designed for sanding, blending, smoothing and surface preparation applications. It uses aluminium oxide abrasive across 48 overlapping flaps supported by a fibreglass backing. The flat flap orientation is suited to working on flatter surfaces and edges, while the 80 grit provides controlled material removal with a finer finish than coarser grit options. A 10mm (25/64 inch) arbour provides mounting compatibility with suitable machines, and the disc is rated for a maximum operating speed of 20,000 RPM.

80 grit flat flap disc for sanding, smoothing and surface preparation

A flap sanding disc uses overlapping abrasive flaps arranged around a backing plate. As the exposed abrasive wears during use, fresh abrasive material is progressively presented, providing sustained cutting action. A flat flap configuration is particularly useful for working across flatter surfaces where controlled sanding, blending and surface refinement are required.

Product highlights

  • 76mm diameter Compact disc size for controlled sanding and finishing applications.
  • 80 grit abrasive Suitable for moderate sanding, blending and surface refinement.
  • Aluminium oxide abrasive Provides effective cutting action for general abrasive applications.
  • 48 abrasive flaps Overlapping flap construction provides progressive abrasive exposure during use.
  • Flat flap orientation Suited to flatter surfaces, edges and general blending work.
  • Fibreglass backing Provides structural support for the abrasive flap assembly.
  • 20,000 RPM maximum Suitable for compatible machines operating within the specified speed limit.

Features

  • Aluminium oxide abrasive Provides dependable sanding and finishing performance.
  • 80 grit grade Suitable for controlled material removal, blending and surface smoothing.
  • 76mm disc diameter Provides a compact working area for controlled applications.
  • 10mm arbour Equivalent to approximately 25/64 inch for compatible tool mounting.
  • 48-flap construction Provides multiple overlapping abrasive surfaces.
  • Flat configuration Supports controlled contact across flatter work surfaces.
  • Fibreglass backing Supports the abrasive assembly during operation.

Benefits

  • Controlled surface refinement: The 80 grit abrasive provides smoother results than coarser 40 or 60 grit discs while still offering useful material removal.
  • Progressive abrasive exposure: Overlapping flaps continually expose abrasive as the working surfaces wear.
  • Controlled surface contact: The flat configuration is practical for working on flat surfaces and edges.
  • Compact handling: The 76mm diameter is useful where a smaller sanding disc provides improved access and control.
  • High-speed capability: The 20,000 RPM maximum rating accommodates suitable high-speed machines when used within specification.

Application

  • General sanding and surface smoothing
  • Surface preparation
  • Blending and finishing
  • Edge preparation
  • Cleaning and preparing compatible work surfaces
  • Workshop fabrication and maintenance
  • General abrasive finishing applications

Extra Information

  • Disc diameter: 76mm / 3 inch.
  • Arbour size: 10mm / 25/64 inch.
  • Abrasive material: Aluminium oxide.
  • Backing material: Fibreglass.
  • Grit: 80.
  • Flap orientation: Flat.
  • Number of flaps: 48.
  • Maximum operating speed: 20,000 RPM.
  • Never operate the disc above its stated maximum RPM.

Pro Tips

  • Use light, controlled pressure and allow the abrasive to perform the cutting.
  • Avoid holding the disc stationary in one area, as this may create uneven material removal.
  • Keep the disc moving smoothly across the work surface for more consistent results.
  • Check that the machine speed does not exceed 20,000 RPM before fitting the disc.
  • For a finer final finish, progress to a higher-grit abrasive after the 80 grit stage.

How to Use

  • Disconnect the machine from its power source before fitting the flap disc.
  • Confirm that the machine is compatible with a 76mm disc and 10mm arbour.
  • Check that the machine's maximum operating speed does not exceed the disc's 20,000 RPM rating.
  • Inspect the flap disc for cracks, damaged flaps or backing damage before installation.
  • Mount and secure the disc according to the machine manufacturer's instructions.
  • Secure the workpiece where necessary.
  • Start the machine and allow it to reach operating speed before contacting the workpiece.
  • Apply light, controlled pressure while moving the disc smoothly across the surface.
  • Stop the machine and allow the disc to come to a complete stop before setting the tool down.

Safety

  • Always wear suitable eye protection, hearing protection and respiratory protection for the material being worked.
  • Wear suitable protective gloves and clothing where appropriate.
  • Never exceed the maximum rated speed of 20,000 RPM.
  • Confirm that the disc diameter and arbour size are compatible with the machine before installation.
  • Inspect the disc before every use and do not use it if the backing or abrasive flaps are cracked, torn or damaged.
  • Make sure the disc is securely mounted before starting the machine.
  • Keep hands and loose clothing clear of the rotating disc.
  • Secure the workpiece where necessary and maintain firm control of the machine.
  • Allow the disc to come to a complete stop before setting the machine down.

Specifications

Description Spec
Brand Tork Craft
Cat No. TCFD076-80
Product Type Flap Sanding Disc
Diameter 76mm / 3 Inch
Arbour 10mm / 25/64 Inch
Grit 80
Flap Orientation Flat
Abrasive Material Aluminium Oxide
Backing Material Fibreglass
Number Of Flaps 48
Maximum RPM 20,000 RPM
Application Sanding, Blending, Smoothing And Surface Preparation
Tool Type Abrasive Flap Disc
Primary Use Surface Smoothing, Blending And Preparation

In the box:

  • 1 x Tork Craft Flap Sanding Disc 76mm x 10mm 80 Grit Flat
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy