Annular Hole Cutter Tct 26 X 55mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 57
Model: TCAC026-4
Weight: 0.13kg
Pack Dim: 120.00mm x 38.00mm x 35.00mm
UPC: 6009515895150

Price:

R 926.43

Ex VAT: R 805.59

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 26 × 55 mm, 19.05 mm (3/4") Weldon

Size: 26 mm x 55 mm [3/4" Weldon Shank]

The 26 mm TCT annular cutter by Tork Craft is designed for robust performance in steel and cast-iron drilling. With a55 mm cutting depth and a secure 19.05 mm (3/4") Weldon shank, it delivers fast, clean holes while minimising feed pressure and burr formation.

Extra Information

Use in a magnetic-base drill or a compatible drill-press with Weldon shank arbor.
A pilot pin (sold separately) is required for centring and slug ejection—check your arbor/holder to match size.
When drilling stainless steel or harder materials, apply cutting fluid and maintain steady feed to preserve cutter life and chip clearance.

Pro Tip

Clean the magnet base surface thoroughly and clamp to a flat area. Start the drill at lower speed until the cutter locates, then increase feed until consistent chips form. Stop periodically to clear chips and re-lubricate on deeper cuts to maximise finish and tool durability.

Extra Information

Use in a magnetic-base drill or a compatible drill-press with Weldon shank arbor.
A pilot pin (sold separately) is required for centring and slug ejection—check your arbor/holder to match size.
When drilling stainless steel or harder materials, apply cutting fluid and maintain steady feed to preserve cutter life and chip clearance.

Pro Tip

Clean the magnet base surface thoroughly and clamp to a flat area. Start the drill at lower speed until the cutter locates, then increase feed until consistent chips form. Stop periodically to clear chips and re-lubricate on deeper cuts to maximise finish and tool durability.

Features

26 mm diameter — accommodates larger anchor bolts and clearance holes.
55 mm cutting depth — suitable for thick plate and stacked material.
19.05 mm (3/4") Weldon shank — secure two-flat drive fits most magnetic-base drills.
TCT (tungsten-carbide-tipped) teeth — long life and high cutting speed in demanding materials.
Thin-wall, multi-flute body — faster penetration with reduced feed force and better chip ejection.

Benefits

Faster hole-making: only the peripheral material is removed, making the cut quicker than a traditional twist drill.
Cleaner finish: reduced burrs and smoother edges means less post-drilling clean-up.
Longer tool life: carbide tips stay sharp for many holes in steel and cast-iron.
Lower operator fatigue: reduced feed force is helpful especially during overhead or vertical drilling work.

Safety

Wear eye, ear and gloves protection; use cutting fluid to control heat and aid chip flow.
Ensure the magnet (or work clamp) is firmly secured and the workpiece stable before operating; tether the drill when working at height or on angled surfaces.
Do not use hammer or impact action; maintain steady feed and allow the slug to eject naturally to avoid jamming.
Disconnect power before changing cutters, pilot pins or shanks.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC026-4
Product Type	Annular hole cutter (TCT)
Diameter	26 mm
Cutting Depth	55 mm
Shank	19.05 mm (3/4") Weldon, two-flat drive
Tip Material	Tungsten-carbide-tipped
Body	Alloy steel, thin-wall design
Suitable Materials	Mild & structural steel, stainless (with coolant), cast-iron
Recommended Machine	Magnetic-base drill or drill-press with Weldon shank arbor
Pilot Pin	Required for centring & slug ejection
Pack Quantity	1