Pneumatics
Model: SG MP200
UPC: 6009515819507
AirCraft Professional Spray Gun Suction Cup HVLP 1.4mm Nozzle (SG MP200)
At a Glance: Professional HVLP suction cup spray gun with a 1.4mm nozzle for smooth, even coverage and better control.
The AirCraft SG MP200 is a professional HVLP spray gun built for clean, controlled spraying with a classic suction cup (bottom feed) setup.
The 1.4mm nozzle size makes it a versatile choice for everyday finishing work where you want consistent atomi..
R 957.95
Ex VAT:R 833.00
Model: SG MP866
UPC: 6009515818661
HVLP spray gun 1.4mm
The success behind an HVLP spray gun, is the low amount of overspray.
This is
achieved by having an improved atomization, by using a lower air pressure and a
higher volume of airflow.
HVLP - High Volume Low Pressure
....
R 718.18
Ex VAT:R 624.50
Model: SG PP10
UPC: 6009515815004
Paint pot 10 l - Manual mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer's data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
SG PPPQ2U -
PQ2 Spray ..
R 6,418.15
Ex VAT:R 5,581.00
Model: SG PP10-2
UPC: 6009515829995
AirCraft 10 Litre Automatic Mix Paint Pot Only (SG PP10-2)
At a Glance: 10L pressure-fed paint pot with automatic mixing—keeps coatings consistent for smoother spray delivery (pot only).
When you’re spraying larger jobs, consistency is everything. The AirCraft SG PP10-2 10 Litre Automatic Mix Paint Pot is designed to keep your coating properly mixed and pressure-fed, so the material reaching your spray gun stays consistent from start to fin..
R 8,339.80
Ex VAT:R 7,252.00
Model: SG PP20
UPC: 6009515815011
Paint pot 20 l - Manual mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer's data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
SG PPPQ2U -
PQ2 Spray ..
R 10,811.73
Ex VAT:R 9,401.50
Model: SG PP20-1
UPC: 6009515815028
Paint pot 20 l - Automatic mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer's data sheet.
The pot is fitted with an automatic mixing paddle to automatically agitate the
paint to prevent it from separating.
Accessories to use with paint pot:
SG PPPQ2U -
PQ2 Sp..
R 11,587.98
Ex VAT:R 10,076.50
Model: SG PP40
UPC: 6009515829971
Paint pot 40 l - Manual mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer's data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
SG PPPQ2U -
PQ2 Spray ..
R 10,229.25
Ex VAT:R 8,895.00
Model: SG PP40-1
UPC: 6009515829988
Paint pot 40 l - Automatic mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer's data sheet.
The pot is fitted with an automatic mixing paddle to automatically agitate the
paint to prevent it from separating.
Accessories to use with paint pot:
SG PPPQ2U -
PQ2 Sp..
R 16,918.80
Ex VAT:R 14,712.00
Model: SG PP882AG
UPC: 6009515836306
HVLP spray gun 1.4mm
The success behind an HVLP spray gun, is the low amount of overspray.
This is
achieved by having an improved atomization, by using a lower air pressure and a
higher volume of airflow.
Large pattern width, ideal for finishing.
HVLP - High Volume Low Pressure
....
R 1,208.08
Ex VAT:R 1,050.50
Model: SG PP882AG-03
UPC: 6009515878894
AirCraft 1.8MM S/S NOZZLE & NEEDLE....
R 424.93
Ex VAT:R 369.50
Model: SG PPPQ2U
UPC: 6009515830038
Pressure feed spray gun for paint pots - Ø 2.0mm
The spray gun is excellent for commercial painting where a large amount of spraying is required.
Care should be taken not to use pressure feed spray guns with catalyst/hardener based paints. Refer to paint manufacturer's data sheet.
....
R 1,129.88
Ex VAT:R 982.50
Model: SG PPX1
UPC: 6009515830007
10 l paint pot with 2m hose and spray gun
The spray gun is excellent for commercial painting where a large amount of spraying is required.
The paint pot allows for a higher volume of paint to be sprayed using the
pressure feed spray gun.
The paint pot doesn't include an agitator.
Length of hoses: 2m
Care should be taken not to use pressure feed spray guns with catalyst/hardener based paints. Refer to paint manufacturer's da..
R 5,254.93
Ex VAT:R 4,569.50
Model: SG PPX13
UPC: 6009515851903
AirCraft Air Gauge 85psi / 6bar 1/4" Male Bottom Fit For SG PP Paint Pots (SG PPX13)
At a Glance: Dual-scale pressure gauge (0–85psi / 0–6bar) with 1/4" male bottom fitting—fits SG PP paint pots for accurate pressure monitoring.
Dialling in a paint pot without a trustworthy gauge is like cooking without tasting: you’re guessing, and the finish will tell on you.
The AirCraft SG PPX13 Air Gauge gives you a clear dual-scale reading ....
R 586.50
Ex VAT:R 510.00
Model: SG PPX4001S
UPC: 6009515830021
Pressure feed spray gun and hose for paint pot - Ø 2.2mm
The spray gun is excellent for commercial painting where a large amount of spraying is required.
7.5m red air hose and black fluid hose included
Care should be taken not to use pressure feed spray guns with catalyst/hardener based paints. Refer to paint manufacturer's data sheet.
....
R 1,669.80
Ex VAT:R 1,452.00
Model: SG PPX4001S-1
UPC: 6009515836313
AirCraft Paint Pot Hose Set – 7.5m Rubber Twin-Line Pipe (SG-PPX4001S-1)
At a Glance: 7.5m rubber paint pot hose set with twin lines for air and fluid—ideal for remote paint pot spray systems.
When you’re spraying from a remote paint pot, the hose set is the lifeline of your finish. The AirCraft SG-PPX4001S-1 paint pot hoses are built as a durable rubber twin-line pipe designed to carry both air and coating material reliably over distance. With..
R 953.35
Ex VAT:R 829.00
Model: SG PPX4001S-2
UPC: 6009515877088
Pressure feed spray gun for paint pots - Ø 2.2mm
The spray gun is excellent for commercial painting where a large amount of spraying is required.
Care should be taken not to use pressure feed spray guns with catalyst/hardener based paints. Refer to paint manufacturer's data sheet.
....
R 938.40
Ex VAT:R 816.00
Model: SG PPX4001S-3
UPC: 6009515877095
AirCraft Paint Pot Spray Gun Only – 2.0mm Nozzle (SG-PPX4001S-3)
At a Glance: Remote-feed spray gun for pressure paint pots, fitted with a 2.0mm nozzle for strong material flow.
Built for pressure paint pot setups where consistent feed matters, the AirCraft SG-PPX4001S-3 is a dedicated “gun only” solution for remote spraying. The 2.0mm nozzle is geared for higher-flow applications—ideal when you’re laying down primers, protective coatings, or w..
R 938.40
Ex VAT:R 816.00
Model: SG PPX4001S-4
UPC: 6009515889272
AirCraft Paint Pot Spray Gun Only – 1.8mm Nozzle (SG-PPX4001S-4)
At a Glance: Remote-feed spray gun for pressure paint pots, fitted with a 1.8mm nozzle for controlled, consistent coverage.
For pressure paint pot setups where steady delivery and clean control matter, the AirCraft SG-PPX4001S-4 is a reliable “gun only” option built for remote-feed spraying. The 1.8mm nozzle is a versatile size that suits many general-purpose coating tasks, balanc..
R 933.80
Ex VAT:R 812.00
Model: SG PQ2
UPC: 6009515819521
High pressure spray gun - Ø 2.0 mm
The very first spray guns were high pressure spray guns. The design mostly
relies on air pressure to transfer paint to the surface.
Fully adjustable pattern width making use of a high quality stainless steel
fluid tip and needle.
High pressure spray guns are
also known as traditional or conventional spray guns.
....
R 418.60
Ex VAT:R 364.00
Model: SG PQ2P
UPC: 6009515878856
AirCraft Professional High Pressure Spray Gun 2.0mm Nozzle Blister Pack (SG PQ2P)
At a Glance: Professional suction feed high-pressure spray gun with metal cup and 2.0mm nozzle—adjustable pattern and fluid control for smooth, even coverage.
When you need strong atomisation and reliable coverage, a proper high-pressure spray gun makes all the difference. The AirCraft SG PQ2P Professional High Pressure Spray Gun is a suction feed design suppl..
R 316.25
Ex VAT:R 275.00
Model: SG PS6
UPC: 6009515809874
Underbody coating gun
Convenient and easy to use plastic pipe can be used with the nozzle to adapt to various coating requirements.
The gun has a threaded collar which allows for direct attachment to standard
one litre cans.
....
R 234.03
Ex VAT:R 203.50
Model: SG4001
UPC: 6009515819514
High pressure spray gun - Ø 1.8mm
The very first spray guns were high pressure spray guns. The design mostly
relies on air pressure to transfer paint to the surface.
Fully adjustable pattern width making use of a high quality stainless steel
fluid tip and needle.
High pressure spray guns are
also known as traditional or conventional spray guns.
....
R 788.90
Ex VAT:R 686.00
Model: SG472A
UPC: 6009515809522
Low pressure spray gun
The low pressure spray gun is mainly used with medium and high viscosity paint for fast spraying and slow drying paints (enamels). It can also be used for heavy quick drying paints including lacquer, synthetic enamels and latex.
Recommended to be used with
SG 777 compressor.
Do not use above 3.5 Bar air pressure. Minimum required
compressor: 1/3 HP....
R 449.65
Ex VAT:R 391.00
Model: SG472AP
UPC: 6009515878849
AirCraft Low Pressure Spray Gun – Max 3.5 Bar (Blister Pack) (SG472AP)
At a Glance: Low-pressure air spray gun with a maximum working pressure of 3.5 bar, packed in a convenient blister pack for easy storage and display.
For quick coating jobs and everyday workshop spraying, the AirCraft SG472AP low-pressure spray gun is a simple, dependable tool to keep in your kit. Designed to operate up to 3.5 bar, it offers controlled application for genera..
R 343.85
Ex VAT:R 299.00
Model: AT0001
UPC: 6009515812669
Pneumatic nail gun 18 Gauge
The nail gun makes use of 18 Gauge thickness brad nails and it is mostly used
in the cabinet making & trim carpentry industries to resemble panel pins.
The nail gun is light in weight, with an ergonomically shaped handle that is
easy to grip.
A rubber bumper is fitted to protect the wood surface. The nail gun has added
safety where it it will only drive-in a nail when the bumper is depressed
aga....
R 1,083.88
Ex VAT:R 942.50
Model: AT0002
UPC: 6009515812676
Pneumatic nail gun 16 Gauge
The nail gun makes use of 16 Gauge thickness brad nails and it is mostly used
in the cabinet making & trim carpentry industries to resemble panel pins.
The nail gun is light in weight, with an ergonomically shaped handle that is
easy to grip.
A rubber bumper is fitted to protect the wood surface. The nail gun has added
safety where it it will only drive-in a nail when the bumper is depressed
aga....
R 2,064.25
Ex VAT:R 1,795.00
Model: AT0003
UPC: 6009515812683
Impact wrench 1/2" Drive
The impact wrench is used to deliver high torque to either loosen or tighten
projects in many industries from automotive repair to heavy equipment
maintenance.
In operation, a single hammer is accelerated by the motor to make contact
with the 1/2" output shaft to deliver high impact torque as much as 310
Newton-Meter.
A compressor is required with an air flow delivery of at least 228 l/min at
6.3 Ba..
R 1,211.53
Ex VAT:R 1,053.50
Model: AT0004
UPC: 6009515812720
Impact wrench 1/2" Drive
The impact wrench is used to deliver high torque to either loosen or tighten
projects in many industries from automotive repair to heavy equipment
maintenance.
In operation, a twin hammer is accelerated by the motor to make contact with
the 1/2" output shaft to deliver high impact torque as much as 567 Newton-Meter.
A compressor is required with an air flow delivery of at least 291 l/min at
6.3 Bar to m..
R 2,639.25
Ex VAT:R 2,295.00
Model: AT0005
UPC: 6009515812706
Reversible pneumatic drill
The pneumatic drill is ideal for pilot hole drilling in a production line.
The drill has non-variable speed set to 1800 rpm.
A compressor is required with an air flow delivery of at least 106 l/min at
6.3 Bar to make use of the drill.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).....
R 1,018.33
Ex VAT:R 885.50
Model: AT0006
UPC: 6009515812713
Impact wrench 1/2" Drive kit
The impact wrench is used to deliver high torque to either loosen or tighten
projects in many industries from automotive repair to heavy equipment
maintenance.
In operation, a single hammer is accelerated by the motor to make contact
with the 1/2" output shaft to deliver high-impact torque as much as 310
Newton-Meter.
A compressor is required with an airflow delivery of at least 228 l/min at
6.3..
R 1,641.05
Ex VAT:R 1,427.00
Model: AT0007
UPC: 6009515812690
Die grinder kit
Professional grinder kit giving complete flexibility for most grinding and
polishing needs.
The die grinder has non-variable speed set to 25 000 rpm.
A compressor is required with an air flow delivery of at least 115 l/min at
6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Included in the kit:
10 grinding points
Ø 3.2mm colle....
R 609.50
Ex VAT:R 530.00
Model: AT0009
UPC: 6009515816582
1/3 sheet orbital sander - 95x175mm
The orbital sander, also known as a Jitterbug, makes use of 1/3 sheet
abrasives that can be securely held in place with locking clamps in the front
and back.
A dead man's throttle switch is fitted on top for safety. The sander has a
contoured palm grip that allows for one handed sanding.
A compressor is required with an air flow delivery of at least 170 l/min at
6.3 Bar to ....
R 1,145.40
Ex VAT:R 996.00
Model: AT0010
UPC: 6009515816599
Random orbital sander - Ø 150mm
Professional pneumatic random orbital sander with Ø 150mm Hook & Loop
sanding pad.
Heavy duty ball bearing construction for improved lower vibration performance.
A compressor is required with an air flow delivery of at least 115 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Recommended replacement backing p....
R 1,431.18
Ex VAT:R 1,244.50
Model: AT0011
UPC: 6009515820336
AirCraft Air Orbital Sander 150mm Hook And Loop With Dust Extraction (AT0011)
At a Glance: 150mm pneumatic orbital sander with hook-and-loop pad and built-in dust extraction for cleaner, finer finishing.
Get a smoother finish with less mess using the AirCraft AT0011 Air Orbital Sander. Built around a 150mm hook-and-loop sanding pad for fast disc changes, this air-powered sander is ideal for surface preparation and finishing work where control..
R 1,566.88
Ex VAT:R 1,362.50
Model: AT0012
UPC: 6009515816612
Reversible pneumatic drill
The pneumatic drill is ideal for drilling in a production line.
The drill has non-variable speed set to 550 rpm.
A compressor is required with an air flow delivery of at least 170 l/min at
6.3 Bar to make use of the drill.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).....
R 1,298.35
Ex VAT:R 1,129.00
Model: AT0013
UPC: 6009515816629
Angle grinder - Ø 125mm
Professional pneumatic angle grinder for Ø 115mm and Ø 125mm cutting and grinding discs.
The exhaust is positioned on the front of the gearbox.
A compressor is required with an air flow delivery of at least 142 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).....
R 1,998.13
Ex VAT:R 1,737.50
Model: AT0014
UPC: 6009515820329
Random orbital sander - Ø 150mm
Professional pneumatic random orbital sander with Ø 150mm hook and loop sanding pad.
Heavy duty ball bearing construction for improved lower vibration performance.
A compressor is required with an air flow delivery of at least 425 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Recommended replacement backing....
R 1,497.88
Ex VAT:R 1,302.50
Model: AT0015
UPC: 6009515823726
Ratchet wrench - 3/8" Drive
Professional ratchet wrench, featuring a strong single pawl ratchet with a
maximum torque of 69 Newton-metres.
The handle is ergonomically shapped with a comfortable rubber grip. The dead
man switch makes is safe to use in removing/replacing radiators, spark plugs,
air conditioning and waterpumps.
A compressor is required with an air flow delivery of at least 114 l/min at
6.3 Bar to make use of the r..
R 1,002.23
Ex VAT:R 871.50
Model: AT0016
UPC: 6009515823733
Ratchet wrench - 1/2" Drive
Professional ratchet wrench, featuring a strong single pawl ratchet with a
maximum torque of 69 Newton-metres.
The handle is ergonomically shapped with a comfortable rubber grip. The dead
man switch makes is safe to use in removing/replacing radiators, spark plugs,
air conditioning and waterpumps.
A compressor is required with an air flow delivery of at least 114 l/min at
6.3 Bar to make use of the r..
R 1,015.45
Ex VAT:R 883.00
Model: AT0017
UPC: 6009515823740
Die grinder - 25 000 rpm
Professional die grinder giving complete flexibility for most grinding and
polishing needs.
The die grinder has non-variable speed set to 25 000 rpm.
A compressor is required with an air flow delivery of at least 115 l/min at
6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).....
R 498.53
Ex VAT:R 433.50
Model: AT0018
UPC: 6009515823757
Hydraulic riveter
Professional hydraulic riveter, featuring a pull force of 850 kg.
Nose pieces are located on the underside of the riveter.
A compressor is required with an air flow delivery of at least 0.8 l/min at
6.3 Bar to make use of the riveter.
A container on the back holds the mandrels of the already fitted blind
rivets.
Riveting capacity:
Stainless steel: 2.4-3.2mm blind rivets
Aluminium: 2.4-4.8mm blind rivets
..
R 3,250.48
Ex VAT:R 2,826.50
Model: AT0019
UPC: 6009515823825
Pneumatic staple gun 21 Gauge
The staple gun makes use of 21 Gauge staples with a crown width of 12.7mm.
It is light in weight, and compact, with an ergonomically shaped handle that is
easy to grip.
Max length of staples: 16mm
Magazine capacity: 125 staples
Great for construction and home repair projects: fabric, upholstery, vinyl
and
light duty wood assembly.
Make sure that an in-line lubricator is fitted with pneumatic ..
R 957.95
Ex VAT:R 833.00
Model: AT0020
UPC: 6009515823832
Random orbital sander - Ø 50mm
Professional pneumatic random orbital sander with Ø 50mm hook and loop sanding pad.
Heavy duty ball bearing construction for improved lower vibration performance.
A compressor is required with an air flow delivery of at least 100 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Recommended replacement backing p....
R 1,427.73
Ex VAT:R 1,241.50
Model: AT0021
UPC: 6009515823849
Reciprocating body saw
Professional body saw cuts intricate shapes in most metals and other materials.
Mostly used in body shops to cut body panels or an exhaust system.
Safety pin on the dead man switch prevents accidental starting.
A compressor is required with an air flow delivery of at least 170 l/min at
6.3 Bar to make use of the body saw.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Cut ..
R 1,164.95
Ex VAT:R 1,013.00
Model: AT0021-01
UPC: 6009515824419
AirCraft 2pc Saw Blade Set – 18T & 24T for Body Saw (AT0021-01)
At a Glance: Two replacement blades (18 teeth & 24 teeth) for AirCraft body saws—ideal for sheet metal and bodywork cutting.
Fresh blades make all the difference—cleaner cuts, less vibration, and better control. The AirCraft AT0021-01 2-piece saw blade set includes two blade options (18T and 24T) to suit the job at hand when using a body saw. Use the 18-tooth blade when you....
R 64.17
Ex VAT:R 55.80
Model: AT0022
UPC: 6009515823856
AirCraft Air Tire Buffer For Roughing Low Areas, Recapping And Tire Scuffing (AT0022)
At a Glance: Pneumatic tyre buffer designed for controlled roughing, scuffing and surface preparation—ideal for recapping, patch work and adhesion prep.
Tyre repair and recapping work lives or dies on surface preparation. If the rubber isn’t keyed properly, bonding suffers—and the job won’t last. The AirCraft AT0022 Air Tire Buffer is built for the real-wo..
R 1,410.48
Ex VAT:R 1,226.50
Model: AT0023
UPC: 6009515824860
AirCraft Air Die Grinder 6mm 4000rpm (AT0023)
At a Glance: 6mm collet with a fixed 4 000 rpm speed for controlled grinding and polishing.
The AirCraft AT0023 air die grinder is a practical pneumatic tool designed to give you flexible control for a wide range of grinding and polishing tasks.
With a non-variable speed set to 4 000 rpm and a 6mm collet, it’s ideal for workshops where steady, predictable performance matters—especially when w..
R 982.10
Ex VAT:R 854.00
Model: AT0024
UPC: 6009515826963
AirCraft Air Needle Scaler For Removing Paint, Rust, Dirt Or Welding Slag (AT0024)
At a Glance: Pneumatic needle scaler for aggressive surface cleaning—strips rust, paint and slag fast while reaching irregular shapes and tight areas.
Some jobs don’t need gentle sanding—they need controlled, rapid impact. The AirCraft AT0024 Air Needle Scaler is built for heavy-duty surface preparation where paint, rust, dirt and welding slag must go. Multip..
R 1,327.10
Ex VAT:R 1,154.00
Model: AT0025
UPC: 6009515828509
Angle grinder - Ø 180mm
Professional pneumatic angle grinder for Ø 180mm grinding discs.
A compressor is required with an air flow delivery of at least 2040 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic oil.....
R 5,692.50
Ex VAT:R 4,950.00
Model: AT0026
UPC: 6009515837327
Random orbital sander - Ø 150mm
Professional pneumatic random orbital sander with Ø 150mm Hook & Loop
sanding pad.
Heavy-duty ball bearing construction for improved lower vibration performance.
Includes a dust extraction port
A compressor is required with an air flow delivery of at least 128 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil.
Recommen....
R 2,174.08
Ex VAT:R 1,890.50