Tork Craft Replacement Inserts M10 X 1.5 X 15mm 1.5D 20pc for NR5010

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: NR5010-02
Weight: 0.06kg
Pack Dim: 117.00mm x 98.00mm x 21.00mm
UPC: 6009515859503

Price:

R 141.45

Ex VAT: R 123.00

Available Options

Stockist

Tork Craft NR5010-02 Replacement Inserts M10 X 1.5 X 15mm 1.5D 20pc

At a Glance: 20 replacement stainless steel M10 x 1.5mm thread inserts, 15mm long, for the Tork Craft NR5010 internal thread repair kit.

The Tork Craft NR5010-02 Replacement Inserts are made for use with the Tork Craft NR5010 M10 x 1.5 internal thread repair kit. These inserts are used to repair damaged, stripped, worn or over-used internal M10 threads, restoring the thread so the original M10 x 1.5mm fastener can be used again.

Manufactured from stainless steel, these inserts create a durable new internal thread once installed into the correctly drilled and tapped repair hole. The 1.5D insert length provides a 15mm repair depth, making it a strong, practical choice for many common M10 thread repairs in automotive, construction, DIY, workshop and general engineering applications.

Replacement 1.5D insert pack for the NR5010 thread repair kit

This 20 piece insert pack replenishes the inserts used with the NR5010 thread repair kit. The 15mm 1.5D length offers a dependable general-purpose repair depth and is the same insert length supplied with the main NR5010 kit.

Product highlights

20 piece insert pack Supplied with 20 replacement inserts for multiple M10 thread repairs.
M10 x 1.5mm thread size Designed for repairing M10 internal threads with a 1.5mm pitch.
1.5D insert length 15mm insert length provides a strong and reliable internal thread repair.
Stainless steel construction Creates a durable replacement thread surface inside the repaired hole.
For NR5010 repair kit Replacement inserts made for the Tork Craft NR5010 internal thread repair kit.
Carded blister packaging Supplied on a hanging card for convenient storage, display and identification.

Extra Information

NR5010-02 is the 1.5D replacement insert pack for the Tork Craft NR5010 M10 x 1.5mm internal thread repair kit.
1.5D means the insert length is 1.5 times the thread diameter. For M10, this gives an insert length of approximately 15mm.
This is the same 15mm insert length supplied with the NR5010 14 piece thread repair kit.
These inserts are used only after the damaged hole has been correctly drilled and tapped using the correct thread repair tools.
The inserts are for internal thread repair and are not used for cutting external threads on bolts or rods.
Other compatible replacement insert lengths for the NR5010 kit include NR5010-01 at 10mm (1D) and NR5010-03 at 20mm (2D).

Pro Tips

Use the 15mm 1.5D insert when the hole depth allows for a stronger repair than a shorter 10mm 1D insert.
Always clean the tapped hole properly before installing the insert. Swarf or dirt can prevent correct seating.
Use the correct installation tool from the NR5010 kit and wind the insert in carefully to avoid damaging the coil.
Install the insert approximately 1/4 to 1/2 turn below the surface where possible for a neat finished repair.
Break off and remove the tang after installation before fitting the bolt.

How to Use

Confirm that the damaged internal thread is M10 x 1.5mm and that a 15mm 1.5D insert is suitable for the repair depth.
Use the correct drill and STI tap from the NR5010 thread repair kit to prepare the damaged hole.
Clean the tapped hole thoroughly to remove chips, swarf and loose material.
Fit the replacement insert onto the installation tool from the NR5010 kit.
Wind the insert into the tapped hole using the installation tool until it is correctly positioned.
Use the break tool to snap off the insert tang.
Check the repaired thread by carefully threading in the correct M10 x 1.5mm fastener by hand before final assembly.

Features

Replacement thread inserts Replenishes the inserts used with the NR5010 thread repair kit.
Metric internal thread repair Suitable for M10 x 1.5mm internal thread repairs.
Medium 1.5D length 15mm insert length offers a strong repair depth for many common M10 applications.
Stainless steel inserts Provides a tough replacement thread once installed correctly.
Workshop-ready pack Convenient 20 piece pack for repeated thread repair work.

Benefits

Extends the use of the repair kit: Keeps the NR5010 kit ready for more repairs after the original inserts have been used.
Restores the original thread size: The repaired hole accepts the original M10 x 1.5mm fastener size.
Helps save damaged components: Allows damaged threaded holes to be repaired instead of replacing the complete part.
Strong general-purpose repair: The 15mm 1.5D insert length provides a dependable repair depth for many applications.
Durable repair finish: The stainless steel insert creates a new internal thread surface inside the repaired hole.

Application

Replacement inserts for the Tork Craft NR5010 internal thread repair kit.
Repairing damaged M10 x 1.5mm internal threads.
Restoring stripped, worn or over-used threaded holes.
Automotive repair and maintenance work.
Construction, DIY, workshop and general engineering applications.

Safety

Always use the correct tool for the job.
Using any tool can be dangerous when incorrect procedures are followed.
Wear eye protection when drilling, tapping and breaking off the insert tang.
Run the drill bit at the correct RPM for the drill diameter and material being drilled.
Use suitable tapping fluid during the tapping process.
Ensure the drill bit and tap are clean and in good condition before use.
Clamp or secure the workpiece before drilling or tapping.
Keep hands clear of sharp swarf, drill flutes, tap edges and repaired threads.
Follow all safety procedures and instructions shown on the product, packaging or manual for optimal performance.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	NR5010-02
Barcode	6009515859503
Product Type	Replacement Thread Inserts
Product Description	Thread Repair Kit M10 X 1.5 X 15mm (1.5D) Replacement Inserts For NR5010
Thread Type	Internal Thread Repair
Thread Size	M10
Thread Pitch	1.5mm
Insert Length	15mm
Insert Length Ratio	1.5D
Insert Material	Stainless Steel
Quantity	20pc
Compatible Kit	NR5010
Product Classification	Standard Yellow
Packaging Type	Hanging Card / Blister
Sales Unit	Each
Related Insert Packs	NR5010-01, NR5010-03