Polisher Service Kit Main Roller Comp.(50-59/69-75) For My3025-1

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: MY3025-1-SK16
Weight: 0.48kg
Pack Dim: 100.00mm x 102.00mm x 102.00mm
UPC: 6009515852405

Price:

R 2,285.63

Ex VAT: R 1,987.50

Available Options

Stockist

Tork Craft Polisher Service Kit Main Roller Comp. (50–59/69–75) For MY3025-1

At a Glance; Main contact roller component group for MY3025-1 tube belt sander/polisher

The Tork Craft Polisher Service Kit Main Roller Comp. (50–59/69–75) For MY3025-1 is a genuine replacement set for the main contact roller assembly on your tube belt sander/polisher. This is the roller group that carries the belt around the workpiece and takes most of the load while you polish stainless tube, railings and structural sections. After long service the original rollers, bushes and related hardware can wear, leading to rough running, poor contact and a patchy finish. Fitting the MY3025-1-SK16 kit refreshes the main roller area so the belt runs smoothly and tracks correctly again where it matters most.

Standout feature – complete main roller group for consistent wrap-around contact

The components in this kit correspond to items 50–59 and 69–75 on the MY3025-1 parts diagram, giving you a matched set of main roller parts rather than a mix of odd pieces. With the correct profiles, bores and spacers, the roller sits square in the arm and supports the belt evenly around the tube, helping you achieve a more uniform, professional finish on stainless jobs.

Extra Information

Designed for the Tork Craft MY3025-1 tube belt sander/polisher – always confirm the model number on the rating plate.
Ideal replacement when the main roller shows grooves, flat spots, cracks or excessive play on the shaft.
Best fitted together with a check of the secondary rollers, belt tensioning system and drive components for a full belt-path service.

Pro Tip

After installing the MY3025-1-SK16 main roller kit, fit a new belt and set tracking at low speed first. Once the belt runs steadily without wandering, lock your adjustments and only then move to full-speed polishing – this helps you get the full benefit of the new roller group and extends belt life.

Features

Genuine Tork Craft spare kit main roller components for the MY3025-1 tube belt sander/polisher.
Covers components 50–59 and 69–75 as shown on the official MY3025-1 exploded parts diagram.
Factory-shaped main roller section designed to wrap the sanding belt smoothly around tube and pipe.
Correct bores, bushes and fixings to fit directly into the existing roller arm and brackets.

Benefits

Smoother belt support: a fresh main roller group helps the belt run true with less chatter.
Better surface finish: even contact around the tube reduces stripes, flat spots and uneven polishing marks.
Reduced wear on the machine: a stable, properly supported belt path lowers vibration and strain on the drive system.

Safety

Disconnect the tube belt sander/polisher from the mains and allow all moving parts to stop before working on the roller assembly.
Check that all roller fasteners, spacers and guards are fitted correctly before running the machine.
After reassembly, run the tool at low speed to confirm that the belt tracks freely and does not rub against guards or brackets.
If you are not confident servicing power tools, have the MY3025-1-SK16 kit fitted by a qualified technician.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	MY3025-1-SK16
Product Type	Polisher Service Kit – Main Roller Components
Compatible Tool	Tork Craft MY3025-1 Tube Belt Sander/Polisher
Components Included	Main Roller Comp. (Items 50–59, 69–75)
Component Function	Primary Belt Support And Wrap-Around Contact On Tube
Spare Category	Tube Belt Sander Polisher Spares
Typical Use	Replacing Worn Or Damaged Main Belt Roller Assemblies