Menu
Your Cart

Festool Granat StickFix Sanding Discs 90 mm P280 100 Pack

Festool Granat StickFix Sanding Discs 90 mm P280 100 Pack
Festool Granat StickFix Sanding Discs 90 mm P280 100 Pack
  • Brand: FESTOOL
  • Model: FES497850
  • Weight: 0.24kg
  • Dim: 115 mm x 105 mm x 125 mm
  • UPC: 4014549155028
Price:
R 1,157.48
Ex VAT: R 1,006.50

Available Options

Festool Granat StickFix Sanding Discs 90 mm P280 100 Pack

At a Glance: Fine P280 Granat abrasive discs with a 90 mm diameter, six-hole extraction pattern and StickFix backing. Supplied in a pack of 100 for the round sanding pad of the Festool ROTEX RO 90 DX.

Refine prepared surfaces with Festool Granat P280 sanding discs. Designed for fine sanding of suitable coatings and hard substrates, these compact discs are useful for controlled preparation of cured paint, varnish, primers and fillers where P280 is specified. Granat's special anti-clogging coating helps reduce material build-up on the abrasive, supporting consistent cutting performance and service life. StickFix fastening makes disc changes straightforward, while the six-hole pattern works with the matching backing pad and extraction system to carry sanding dust away from the working area.

Granat: versatile preparation for demanding finishes

Granat is Festool's universal abrasive range for a wide variety of preparation tasks, including modern paint and clear-coat systems. This P280 version provides a fine sanding step for refining an already prepared surface or sanding between coats when permitted by the finish manufacturer's instructions.

Product Highlights

  • Fine P280 grit: Suitable for refining prepared surfaces and controlled sanding between coats where specified.
  • Granat abrasive quality: Developed for versatile use, particularly on coatings and hard substrates.
  • Anti-clogging coating: Helps reduce deposits on the abrasive surface during sanding.
  • StickFix fastening: Hook-and-loop attachment allows quick fitting and removal.
  • Six-hole extraction pattern: Supports dust removal through the matching 90 mm sanding pad.
  • 100-disc pack: Keeps matching replacement abrasives available for ongoing finishing work.

Product Compatibility

  • Festool ROTEX RO 90 DX FEQ: Compatible with the machine's approved 90 mm round sanding pad.
  • 90 mm StickFix sanding system: Centre the disc and align its extraction openings with the matching backing pad.
  • Round pad configuration: These circular discs are for round-pad sanding. The RO 90 DX delta attachment uses corresponding triangular abrasives.

Match P280 to the Finish System

Follow the paint, primer or varnish manufacturer's recommended sanding grade and curing time. Allow coatings to become sufficiently hard before sanding, and use light pressure near edges to reduce the risk of sanding through.

Features

  • 90 mm circular format: Matches the compact round sanding arrangement of the RO 90 DX.
  • P280 abrasive grade: Provides a fine scratch pattern for suitable preparation stages.
  • Special surface coating: Helps resist clogging from sanding residue.
  • Perforated construction: Six openings provide a dust extraction path through the sanding assembly.
  • Hook-and-loop backing: Attaches directly to a compatible StickFix backing pad.

Benefits

  • Controlled surface refinement: Helps refine earlier sanding marks and lightly prepare suitable cured coatings.
  • Consistent abrasive performance: Reduced clogging helps the cutting surface remain effective.
  • Convenient maintenance: Replace a worn disc quickly and continue working.
  • Practical for smaller components: The compact disc size is useful for localised finishing and joinery work.

Application

  • Fine sanding of prepared paint and varnish surfaces.
  • Sanding between coats where the coating system specifies P280.
  • Fine preparation of cured primers, fillers and repair compounds.
  • Refining suitable plastics, acrylic and mineral-based solid surfaces.
  • Localised preparation of coated furniture and interior joinery components.

Extra Information

  • Product identification: Festool order number 497850.
  • Catalogue designation: STF D90/6 P280 GR /100.
  • Abrasive range: Granat.
  • Grit position: P280 is finer than P240 and coarser than P320.
  • Pack contents: All 100 discs are P280; this is a single-grit pack.

Use Fine Abrasives on a Prepared Surface

P280 is most useful when the surface has already been levelled and deeper defects have been addressed. Remove pronounced scratches or unevenness with an appropriate earlier sanding stage, then refine the scratch pattern progressively.

Anti-Clogging Performance Starts with Correct Preparation

The special coating helps reduce residue build-up, but good results still depend on adequate coating cure, effective extraction and sensible sanding pressure. If material smears or rapidly loads the disc, stop and check the surface condition before continuing.

Pro Tips

  • Test the abrasive on an inconspicuous area or sample finished with the same coating system.
  • Inspect the surface under angled light to reveal remaining scratches, nibs and uneven areas.
  • Use a lighter touch at edges, corners and raised details where coatings are easier to sand through.
  • Clean away sanding dust using the method recommended for the next coating.
  • Replace a blunt or damaged disc rather than compensating with extra pressure.

How to Use

  • Confirm the sanding stage: Check that P280 suits the material and the intended finish.
  • Disconnect the sander: Switch off and unplug the machine before changing abrasives.
  • Inspect the backing pad: Ensure the correct round pad is secure, clean and undamaged.
  • Fit the disc: Centre the abrasive, align the six extraction holes and press the StickFix backing evenly into place.
  • Prepare for sanding: Secure the workpiece and connect suitable dust extraction.
  • Work gently: Follow the sander's operating instructions, using an appropriate mode and controlled, overlapping passes.
  • Inspect and clean: Check the scratch pattern and coating condition regularly, then remove dust before the next preparation or finishing stage.

Safety

  • Wear suitable eye, hearing and respiratory protection for the material being sanded.
  • Use effective dust extraction and keep the work area ventilated.
  • Disconnect the sander from its power supply before changing discs.
  • Secure the workpiece and replace torn or damaged abrasives.
  • Follow the sander's operating instructions and the coating manufacturer's preparation guidance.

Specifications

Description Spec
BrandFestool
Cat No.FES497850
Manufacturer Order Number497850
EAN4014549155028
Catalogue DesignationSTF D90/6 P280 GR /100
Product TypePerforated abrasive sanding discs
Abrasive RangeGranat
Diameter90 mm
GritP280
Sanding GradeFine
ShapeRound
Extraction Pattern6 holes
AttachmentStickFix hook-and-loop
Special FeatureAnti-clogging coating
Compatible SanderROTEX RO 90 DX FEQ with compatible round sanding pad
Primary ApplicationsFine preparation of suitable coatings, primers, fillers and hard substrates
Quantity100 discs

Scope of Delivery:

  • 100 × Festool Granat sanding discs, 90 mm diameter, six-hole pattern, P280 grit.
Delivery note: Sanding discs only. The sander, backing pad and dust extraction equipment are purchased separately.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy