Menu
Your Cart

Festool Titan 2 Sanding Sheets STF 80x400 P80 TI2/50 50 Pack

Festool Titan 2 Sanding Sheets STF 80x400 P80 TI2/50 50 Pack
Festool Titan 2 Sanding Sheets STF 80x400 P80 TI2/50 50 Pack
  • Brand: FESTOOL
  • Model: FES493177
  • Weight: 0.97kg
  • Dim: 41.5 mm x 9 mm x 6.5 mm
  • UPC: 4014549044827
Price:
R 1,228.78
Ex VAT: R 1,068.50

Available Options

Festool Titan 2 Sanding Sheets 80 x 400 mm P80 50 Pack

At a Glance: Coarse P80 Titan 2 abrasives for repair compounds, fillers and suitable coating preparation. Long 80 x 400 mm StickFix sheets, supplied in a pack of 50.

Prepare larger repair areas with Festool Titan 2 P80 sanding sheets. Developed for paintshops and automotive repair workshops, these coarse abrasives are suited to the early stages of shaping and levelling suitable cured fillers and repair compounds. The 80 x 400 mm format fits the Festool LRS 400 and matching hand sanding blocks, providing an extended abrasive surface for working across panel repairs. Aluminium oxide grain and a dust-repellent coating support effective sanding while helping reduce abrasive loading. StickFix hook-and-loop fastening makes sheet changes straightforward as you work through the preparation sequence. With 50 full-size sheets supplied in a carton, this pack provides a practical workshop supply for coarse repair preparation before progressing to the finer grits required by the repair and coating system.

Titan 2: Developed for Repair and Paint Preparation

Titan 2 is Festool's abrasive range for repair compounds, fillers and paintwork preparation. This P80 version is a coarse preparation grade for material removal and initial surface refinement. Subsequent finer sanding stages establish the scratch pattern required before further coating work.

Product Highlights

  • Coarse P80 grit: Suitable for initial sanding and levelling of appropriate cured repair materials.
  • Long 80 x 400 mm format: Provides an extended working surface for compatible sanders and sanding blocks.
  • Repair workshop application: Developed for preparation tasks in paintshops and automotive repair environments.
  • Dust-repellent coating: Helps reduce abrasive loading during sanding.
  • Quick StickFix changes: Hook-and-loop fastening allows convenient abrasive replacement.
  • 50-sheet pack: Supplies one consistent grit for repeated preparation tasks.

Product Compatibility

  • Festool LRS 400: For use with the matching 80 x 400 mm StickFix sanding pad.
  • Festool HSK-A 80x400: Compatible full-length abrasive format for this hand sanding block.
  • Festool HSK-A 80x200: The 80 x 400 mm abrasive must be halved for use with this shorter block.

Check the Pad and Sheet Format

Confirm the sanding pad dimensions, StickFix attachment and extraction-hole arrangement before fitting. Sheets are supplied in the full 80 x 400 mm format. Prepare the required half-length section when using the HSK-A 80x200 block.

Features

  • Aluminium oxide abrasive: Durable cutting grain for suitable repair and surface-preparation applications.
  • Dust-repellent surface coating: Helps limit the accumulation of sanding debris on the abrasive.
  • P80 grit: Coarse grade for the earlier stages of a preparation sequence.
  • StickFix fastening: Attaches to a compatible hook-and-loop sanding pad.
  • Long rectangular sheet: Sized for the corresponding machine pad and hand sanding blocks.
  • Extraction perforations: Allow dust to pass through a matching pad into the dust collection system.

Benefits

  • Effective early preparation: Helps shape and level suitable fillers before finer refinement.
  • Machine and manual options: Supports preparation with the LRS 400 or the listed hand sanding blocks.
  • Efficient sheet replacement: Change worn abrasives quickly to maintain a steady workflow.
  • Supports dust removal: Correct perforation alignment and suitable extraction help clear debris from the sanding area.
  • Practical workshop quantity: Fifty identical sheets keep a useful coarse grit readily available.

Application

  • Initial shaping and levelling of suitable cured body fillers.
  • Coarse preparation of compatible repair compounds.
  • Preparation of suitable existing coatings where material removal is required.
  • Automotive panel-repair preparation in paintshops and body repair workshops.
  • Manual block sanding before subsequent finer preparation stages.

Extra Information

  • Product identification: Catalogue code FES493177 corresponds to Festool order number 493177.
  • Model designation: STF 80x400 P80 TI2/50 identifies the StickFix format, sheet dimensions, P80 grit, Titan 2 range and 50-sheet quantity.
  • Grit position: P80 is finer than P60 and coarser than P120. Select the progression according to the repair material and coating requirements.
  • Material readiness: Allow fillers and repair compounds to cure as specified by their manufacturer before sanding.
  • Replacement guidance: Replace the sheet when cutting performance drops, the abrasive becomes heavily loaded or the backing is damaged.

Where P80 Fits in the Preparation Process

P80 is a coarse preparation grit. It removes material and leaves a scratch pattern that normally requires refinement through finer grades before primer or topcoat application. Follow the repair and paint system's technical instructions for the required sanding sequence.

Using the Long Sheet Format

The 400 mm sheet length suits the corresponding long sanding pad or block. Keep the abrasive fully supported and apply even pressure to maintain control across the repair area.

Getting the Best from Extraction

Align the sheet perforations with the pad openings and keep the extraction passages clear. Check the dust collection system as part of routine preparation, particularly when sanding fillers and coating materials.

Match the Grit to the Repair System

P80 is intended for coarse preparation. Confirm its suitability for the filler, existing coating and next coating stage. Refine the surface to the specified final grit before applying further products, and take care around thin coatings, edges and details.

Pro Tips

  • Start with the appropriate grade: Choose the grit according to the material that needs removing and the repair manufacturer's instructions.
  • Apply even pressure: Let the abrasive cut without concentrating force on a small area.
  • Inspect between stages: Remove loose dust and check the surface profile and remaining scratches before moving finer.
  • Replace loaded sheets: A fresh abrasive helps maintain a predictable cutting action.
  • Store sheets flat and dry: Protect the backing and StickFix surface from creasing, moisture and contamination.

How to Use

  • Assess the repair: Confirm that the material is ready for sanding and that P80 is appropriate for the preparation stage.
  • Isolate powered equipment: When using the LRS 400, disconnect the compressed-air supply before changing abrasives, following the machine's instructions.
  • Inspect the pad: Ensure the compatible StickFix pad or hand sanding block is clean and undamaged.
  • Prepare the sheet: Use the full sheet for the matching 80 x 400 mm pad or halve it for the HSK-A 80x200 block.
  • Attach the abrasive: Align the sheet and extraction perforations, then press it evenly onto the fastening surface.
  • Prepare for sanding: Secure the workpiece, connect suitable dust extraction and follow the equipment's operating instructions.
  • Sand with control: Use even, overlapping passes and inspect the surface regularly.
  • Continue preparation: Replace worn sheets and progress through the finer grits specified by the repair and coating system.

Safety

  • Wear suitable eye protection, hearing protection and respiratory protection for the equipment and material being sanded.
  • Use appropriate dust extraction and ventilation when sanding fillers, repair compounds and coatings.
  • Disconnect the LRS 400 from its compressed-air supply before changing sheets or inspecting the sanding pad.
  • Secure the workpiece and keep hands clear of the moving sanding surface.
  • Replace torn, damaged or poorly attached abrasive sheets before operation.
  • Follow the equipment instructions and the repair material manufacturer's dust-handling and preparation precautions.

Specifications

Description Spec
BrandFestool
Cat No.FES493177
Festool Order Number493177
ModelSTF 80x400 P80 TI2/50
Product TypeRectangular abrasive sanding sheets
Abrasive RangeTitan 2
Abrasive Sheet Size80 x 400 mm
GritP80
Sanding StageCoarse preparation
Abrasive GrainAluminium oxide
Surface CoatingDust-repellent coating
Attachment SystemStickFix hook and loop
Dust ExtractionPerforated for use with a matching extraction pad
Primary ApplicationRepair compounds, fillers and suitable coating preparation
Compatible SanderFestool LRS 400
Compatible Hand Sanding BlocksHSK-A 80x400; HSK-A 80x200 with the abrasive halved
Quantity in Pack50 full-size sheets
PackagingCarton
Country of OriginCzech Republic
EAN4014549044827

Scope of Delivery:

  • 50 x Festool Titan 2 abrasive sheets, 80 x 400 mm, P80, model STF 80x400 P80 TI2/50.
  • Supplied in a carton.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy