Stock: In Stock
Model: TCAC010
UPC: 6009515820732
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 437.35
Ex VAT:R 380.30
Stock: In Stock
Model: TCAC011
UPC: 6009515820749
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 394.34
Ex VAT:R 342.90
Stock: In Stock
Model: TCAC012-1
UPC: 6009515814427
Tork Craft Annular Hole Cutter — TCT, 12 × 30 mm, Weldon Shank 19.05 mm (Model TCAC012-1)
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness..
R 373.39
Ex VAT:R 324.69
Stock: In Stock
Model: TCAC012-2
UPC: 6009515814434
Annular Cutters 55mm long
Annular Cutter: &O/;12mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole..
R 481.71
Ex VAT:R 418.88
Stock: In Stock
Model: TCAC012-3
UPC: 6009515895006
Tork Craft Annular Hole Cutter — TCT, 12 × 35 mm, Weldon Shank 19.05 mm (Model TCAC012-3)
The Tork Craft TCAC012-3 is a tungsten-carbide tipped (TCT) annular cutter with a 12 mm diameter and 35 mm cutting depth, featuring a 19.05 mm Weldon Shank design. This tool is engineered for efficient core drilling through steel, structural sections and other metal fabrication work where precise, clean hole..
R 777.61
Ex VAT:R 676.18
In Stock Soon
Stock: In Stock Soon
Model: TCAC012-4
UPC: 6009515895013
Tork Craft Annular Hole Cutter — TCT, 12 × 55 mm, Weldon Shank 19.05 mm (Model TCAC012-4)
The Tork Craft TCAC012-4 is a tungsten-carbide tipped (TCT) annular cutter with a 12 mm diameter and 55 mm cutting depth, featuring a 19.05 mm Weldon Shank design. This tool is engineered for efficient core drilling through steel, structural sections and other metal fabrication work where clean, accurate hol..
R 879.76
Ex VAT:R 765.01
Stock: In Stock
Model: TCAC013-1
UPC: 6009515814441
Annular Cutters 30mm
Annular Cutter: &O/;13mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 364.26
Ex VAT:R 316.75
Stock: In Stock
Model: TCAC013-2
UPC: 6009515814472
Annular Cutters 55mm long
Annular Cutter: &O/;13mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 481.71
Ex VAT:R 418.88
Stock: In Stock
Model: TCAC014-1
UPC: 6009515814458
Annular Cutters 30mm
Annular Cutter: &O/;14mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 364.26
Ex VAT:R 316.75
Stock: In Stock
Model: TCAC014-2
UPC: 6009515814465
Annular Cutters 55mm long
Annular Cutter: &O/;14mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 453.62
Ex VAT:R 394.45
Stock: In Stock
Model: TCAC014-3
UPC: 6009515895020
Tork Craft Annular Hole Cutter — TCT, 14 × 35 mm, Weldon Shank 19.05 mm (Model TCAC014-3)
The Tork Craft TCAC014-3 is a tungsten-carbide tipped (TCT) annular cutter with a 14 mm diameter and 35 mm cutting depth, featuring a 19.05 mm Weldon shank. Engineered for steel fabrication and structural work, this tool delivers fast, clean holes in metal with minimal material waste and exceptional precisio..
R 777.61
Ex VAT:R 676.18
Stock: In Stock
Model: TCAC014-4
UPC: 6009515895037
Tork Craft Annular Hole Cutter — TCT, 14 × 55 mm, Weldon Shank 19.05 mm (Model TCAC014-4)
The Tork Craft TCAC014-4 is a tungsten-carbide tipped (TCT) annular cutter with a 14 mm diameter and 55 mm cutting depth, featuring a 19.05 mm Weldon shank. This tool is engineered for high-performance core drilling in steel fabrication, structural sections and precision metalwork where clean, accurate holes..
R 879.76
Ex VAT:R 765.01
Stock: In Stock
Model: TCAC015-1
UPC: 6009515814489
Annular Cutters 30mm
Annular Cutter: &O/; 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole ..
R 345.58
Ex VAT:R 300.50
Stock: In Stock
Model: TCAC015-2
UPC: 6009515814496
Annular Cutters 55mm long
Annular Cutter: &O/;15mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 460.52
Ex VAT:R 400.45
Stock: In Stock
Model: TCAC016-1
UPC: 6009515814502
Annular Cutters 30mm
Annular Cutter: &O/;16mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 391.35
Ex VAT:R 340.30
Stock: In Stock
Model: TCAC016-2
UPC: 6009515814519
Annular Cutters 55mm long
Annular Cutter: &O/;16mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 515.49
Ex VAT:R 448.25
Stock: In Stock
Model: TCAC016-3
UPC: 6009515895044
Tork Craft Annular Hole Cutter — TCT, 16×35 mm, Weldon Shank 19.05 mm (Model TCAC016-3)
The Tork Craft TCAC016-3 annular cutter features a 16 mm diameter and 35 mm cutting depth, with a 19.05 mm Weldon shank for use in magnetic drills and fabrication rigs. The TCT (tungsten carbide tipped) cutting edges provide excellent durability and precision, allowing fast, clean core-hole drilling in structu..
R 777.61
Ex VAT:R 676.18
Stock: In Stock
Model: TCAC016-4
UPC: 6009515895051
Tork Craft Annular Hole Cutter — TCT, 16 × 55 mm, Weldon Shank 19.05 mm (Model TCAC016-4)
The Tork Craft TCAC016-4 annular cutter features a 16 mm diameter with a 55 mm cutting depth and a 19.05 mm Weldon shank. Built for demanding fabrication work, its tungsten-carbide tipped (TCT) cutting edges ensure fast, clean holes in steel, structural sections or pipe applications where precision and durab..
R 879.76
Ex VAT:R 765.01
Stock: In Stock
Model: TCAC017-1
UPC: 6009515814526
Annular Cutters 30mm
Annular Cutter: &O/;17mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 409.63
Ex VAT:R 356.20
Stock: In Stock
Model: TCAC017-2
UPC: 6009515814533
Annular Cutters 55mm long
Annular Cutter: &O/;17mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 507.27
Ex VAT:R 441.10
Stock: In Stock
Model: TCAC018-1
UPC: 6009515814540
Annular Cutters 30mm
Annular Cutter: &O/;18mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 411.01
Ex VAT:R 357.40
Stock: In Stock
Model: TCAC018-2
UPC: 6009515814557
Annular Cutters 55mm long
Annular Cutter: &O/;18mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 590.03
Ex VAT:R 513.07
Stock: In Stock
Model: TCAC018-3
UPC: 6009515895068
Tork Craft Annular Hole Cutter — TCT 18 × 35 mm, 19.05 mm (3/4") Weldon
Size: 18 mm x 35 mm [3/4" Weldon Shank]
The Tork Craft 18 mm TCT annular cutter is built for speed and durability when drilling through tough materials. Tungsten-carbide tips stay sharp longer, while the thin-wall design removes only a ring of material for faster cuts, less feed pressure, and minimal....
R 777.61
Ex VAT:R 676.18
Stock: In Stock
Model: TCAC018-4
UPC: 6009515895075
Tork Craft Annular Hole Cutter — TCT 18 × 55 mm, 19.05 mm (3/4") Weldon
Size: 18 mm x 55 mm [3/4" Weldon Shank]
This 18 mm TCT annular cutter is engineered for deep, precise holes up to 55 mm in structural steel and plate. Tungsten-carbide tips keep cutting sharp and fast, while the thin-wall body removes only a ring of material for lower feed force, cooler operatio....
R 879.76
Ex VAT:R 765.01
Stock: In Stock
Model: TCAC019-1
UPC: 6009515814564
Annular Cutters 30mm
Annular Cutter: &O/;19mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 419.23
Ex VAT:R 364.55
Stock: In Stock
Model: TCAC019-2
UPC: 6009515814571
Annular Cutters 55mm long
Annular Cutter: &O/;19mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 590.03
Ex VAT:R 513.07
Stock: In Stock
Model: TCAC020-1
UPC: 6009515814588
Annular Cutters 30mm
Annular Cutter: &O/;20mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 457.99
Ex VAT:R 398.25
Stock: In Stock
Model: TCAC020-2
UPC: 6009515814595
Annular Cutters 55mm long
Annular Cutter: &O/;20mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 603.46
Ex VAT:R 524.75
Stock: In Stock
Model: TCAC020-3
UPC: 6009515895082
Tork Craft Annular Hole Cutter — TCT 20 × 35 mm, 19.05 mm (3/4") Weldon
Size: 20 mm x 35 mm [3/4" Weldon Shank]
This 20 mm TCT annular cutter brings high-efficiency broaching through steel, structural plate and cast iron. With a 35 mm cutting depth, tungsten-carbide-tipped teeth and a rugged 19.05 mm (3/4″) Weldon shank, it’s designed for use in magnetic-base drills and h....
R 777.61
Ex VAT:R 676.18
Stock: In Stock
Model: TCAC020-4
UPC: 6009515895099
Tork Craft Annular Hole Cutter — TCT 20 × 55 mm, 19.05 mm (3/4") Weldon
Size: 20 mm x 55 mm [3/4" Weldon Shank]
This 20 mm TCT annular cutter brings high-efficiency broaching through steel, structural plate and cast iron. With a 55 mm cutting depth, tungsten-carbide-tipped teeth and a rugged 19.05 mm (3/4″) Weldon shank, it’s designed for use in magnetic-base drills and h....
R 879.76
Ex VAT:R 765.01
Stock: In Stock
Model: TCAC021-1
UPC: 6009515814601
Annular Cutters 30mm
Annular Cutter: &O/;21mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 460.52
Ex VAT:R 400.45
Stock: In Stock
Model: TCAC021-2
UPC: 6009515814618
Annular Cutters 55mm long
Annular Cutter: &O/;21mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 611.74
Ex VAT:R 531.95
Stock: In Stock
Model: TCAC022-1
UPC: 6009515814625
Annular Cutters 30mm
Annular Cutter: &O/;22mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 512.61
Ex VAT:R 445.75
Stock: In Stock
Model: TCAC022-2
UPC: 6009515814632
Annular Cutters 55mm long
Annular Cutter: &O/;22mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 644.69
Ex VAT:R 560.60
Stock: In Stock
Model: TCAC022-3
UPC: 6009515895105
Tork Craft Annular Hole Cutter — TCT 22 × 35 mm, 19.05 mm (3/4") Weldon
Size: 22 mm x 35 mm [3/4" Weldon Shank]
The 22 mm TCT annular cutter removes only a thin ring of material for quicker holes, lower feed pressure and a cleaner finish. Carbide-tipped teeth stay sharp in demanding steels, while the robust 19.05 mm (3/4″) Weldon shank provides secure, slip-fre....
R 777.61
Ex VAT:R 676.18
Stock: In Stock
Model: TCAC022-4
UPC: 6009515895112
Tork Craft Annular Hole Cutter — TCT 22 × 55 mm, 19.05 mm (3/4") Weldon
Size: 22 mm x 55 mm [3/4" Weldon Shank]
The 22 mm TCT annular cutter removes only a thin ring of material for quicker holes, lower feed pressure and a cleaner finish. Carbide-tipped teeth stay sharp in demanding steels, while the robust 19.05 mm (3/4″) Weldon shank provides secure, slip-fre....
R 879.76
Ex VAT:R 765.01
Stock: In Stock
Model: TCAC023-1
UPC: 6009515817510
Annular Cutters 30mm
Annular Cutter: &O/;23mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 507.50
Ex VAT:R 441.30
Stock: In Stock
Model: TCAC023-2
UPC: 6009515817527
Annular Cutters 55mm long
Annular Cutter: &O/;23mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 685.98
Ex VAT:R 596.50
Stock: In Stock
Model: TCAC024-1
UPC: 6009515814649
Annular Cutters 30mm
Annular Cutter: &O/;24mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finis..
R 552.46
Ex VAT:R 480.40
Stock: In Stock
Model: TCAC024-2
UPC: 6009515814656
Annular Cutters 55mm long
Annular Cutter: &O/;24mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 749.17
Ex VAT:R 651.45
Stock: In Stock
Model: TCAC024-3
UPC: 6009515895129
Tork Craft Annular Hole Cutter — TCT 24 × 35 mm, 19.05 mm (3/4") Weldon
Size: 24 mm x 35 mm [3/4" Weldon Shank]
This 24 mm TCT annular cutter is designed for fast, accurate holes through structural steel, plate and cast-iron. The tungsten-carbide-tipped teeth and thin-wall construction deliver high performance while the 19.05 mm (3/4") Weldon shank ensures firm drive engagement in ....
R 777.61
Ex VAT:R 676.18
Stock: In Stock
Model: TCAC024-4
UPC: 6009515895136
Tork Craft Annular Hole Cutter — TCT 24 × 55 mm, 19.05 mm (3/4") Weldon
Size: 24 mm x 55 mm [3/4" Weldon Shank]
This 24 mm TCT annular cutter is designed for fast, accurate holes through structural steel, plate and cast-iron. The tungsten-carbide-tipped teeth and thin-wall construction deliver high performance while the 19.05 mm (3/4") Weldon shank ensures firm drive engagement in ....
R 879.76
Ex VAT:R 765.01
Stock: In Stock
Model: TCAC025-1
UPC: 6009515814663
Annular Cutters 30mm
Annular Cutter: &O/;25mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish,..
R 542.97
Ex VAT:R 472.15
Stock: In Stock
Model: TCAC025-2
UPC: 6009515814670
Annular Cutters 55mm long
Annular Cutter: &O/;25mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole f..
R 776.65
Ex VAT:R 675.35
Stock: In Stock
Model: TCAC026-1
UPC: 6009515814687
Annular Cutters 30mm
Annular Cutter: &O/;26mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish,..
R 641.07
Ex VAT:R 557.45
Stock: In Stock
Model: TCAC026-2
UPC: 6009515814694
Annular Cutters 55mm long
Annular Cutter: &O/;26mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole fin..
R 804.20
Ex VAT:R 699.30
Stock: In Stock
Model: TCAC026-3
UPC: 6009515895143
Tork Craft Annular Hole Cutter — TCT 26 × 35 mm, 19.05 mm (3/4") Weldon
Size: 26 mm x 35 mm [3/4" Weldon Shank]
The 26 mm TCT annular cutter by Tork Craft is designed for robust performance in steel and cast-iron drilling. With a 35 mm cutting depth and a secure 19.05 mm (3/4") Weldon shank, it delivers fast, clean holes while minimising feed pressure and burr formation.....
R 828.68
Ex VAT:R 720.59
Stock: In Stock
Model: TCAC026-4
UPC: 6009515895150
Tork Craft Annular Hole Cutter — TCT 26 × 55 mm, 19.05 mm (3/4") Weldon
Size: 26 mm x 55 mm [3/4" Weldon Shank]
The 26 mm TCT annular cutter by Tork Craft is designed for robust performance in steel and cast-iron drilling. With a55 mm cutting depth and a secure 19.05 mm (3/4") Weldon shank, it delivers fast, clean holes while minimising feed pressure and burr formation.....
R 926.43
Ex VAT:R 805.59
Stock: In Stock
Model: TCAC027-1
UPC: 6009515814700
Annular Cutters 30mm
Annular Cutter: &O/;27mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish,..
R 641.07
Ex VAT:R 557.45
Stock: In Stock
Model: TCAC027-2
UPC: 6009515814717
Annular Cutters 55mm long
Annular Cutter: &O/;27mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole fin..
R 925.55
Ex VAT:R 804.83