TORK CRAFT

SANDING BELT CLEANER 105MMX40MMX35MM CARDED

Stock: 153 Model: T BC32324 UPC: 6009675084760

SANDING BELT CLEANER 105MMX40MMX35MM CARDED

Sanding belt cleaner Removes gum build up on abrasives. Application: The sanding belt cleaner instantly cleans sanding belts of all grits and removes the accumulated particles that lodge between the abrasive grains and cause a dull cut. Increase the life of your sanding belts and discs up to 500% with this sanding belt cleaner!....

R 97.75

Ex VAT:R 85.00

Contact us

Stockist

Stock: 525 Model: T BH21010150 UPC: 6009515840129

MAGNETIC BIT HOLDER 150MM ONE TOUCH CARDED 1/4" HEX

MAGNETIC BIT HOLDER 150MM ONE TOUCH CARDED 1/4" HEX....

R 197.40

Ex VAT:R 171.65

Contact us

Stockist

Stock: 558 Model: T BH21010300 UPC: 6009515840150

MAGNETIC BIT HOLDER 300MM ONE TOUCH CARDED 1/4" HEX

MAGNETIC BIT HOLDER 300MM ONE TOUCH CARDED 1/4" HEX....

R 224.83

Ex VAT:R 195.50

Contact us

Stockist

Stock: 858 Model: T BH30090 UPC: 6009515863364

MAGNETIC BIT HOLDER 90MM UNIVERSAL CARDED 1/4" HEX

MAGNETIC BIT HOLDER 90MM UNIVERSAL CARDED 1/4" HEX....

R 206.89

Ex VAT:R 179.90

Contact us

Stockist

Stock: 908 Model: T BH30100 UPC: 6009515863371

MAGNETIC BIT HOLDER 100MM UNIVERSAL CARDED 1/4" HEX

MAGNETIC BIT HOLDER 100MM UNIVERSAL CARDED 1/4" HEX....

R 218.90

Ex VAT:R 190.35

Contact us

Stockist

Stock: 566 Model: T CS103 UPC: 6009675082780

COUNTERSINK HSS 12 MM 1/2" 90 DEGREE

Countersink HSS - 5Flute 1/2” 12mm 90° The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application. A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or below the surface of the surrounding material. A countersink may also be used to remove the burr left from a dri....

R 119.49

Ex VAT:R 103.90

Contact us

Stockist

Stock: 1053 Model: T CS201 UPC: 6009675082810

COUNTERSINK CARB.STEEL 1/4" (6.35MM)

Carbon Steel Countersink - 1/4” (6.35mm) Countersink for Wood A countersink is a conical hole cut into a manufactured object. The same term is used for the cutter used to cut such a hole. Common uses:....

R 56.29

Ex VAT:R 48.95

Contact us

Stockist

Stock: 1375 Model: T CS203 UPC: 6009675082834

COUNTERSINK CARB.STEEL 1/2" (12.7MM)

Carbon Steel Countersink - 1/2” (12.7mm) Countersink for Wood A countersink is a conical hole cut into a manufactured object. The same term is used for the cutter used to cut such a hole. Common uses:....

R 61.47

Ex VAT:R 53.45

Contact us

Stockist

Stock: 1130 Model: T CS205 UPC: 6009675082858

COUNTERSINK CARB.STEEL 3/4" (19 MM)

Carbon Steel Countersink - 3/4" (19mm) Countersink for Wood A countersink is a conical hole cut into a manufactured object. The same term is used for the cutter used to cut such a hole. Common uses:....

R 75.10

Ex VAT:R 65.30

Contact us

Stockist

Stock: 208 Model: T CS300 UPC: 6009515843946

COUNTERSINK HSS 12MM 5/8" 90 DEGREE ON PLASTIC HANDLE

Countersink HSS A countersink HSS (High-Speed Steel) is a type of cutting tool used primarily in machining and woodworking to create a conical hole that allows the head of a screw or bolt to sit flush with or below the surface of the material. Countersink tools are essential for various machining and assembly processes, offering both functionality and precision in creating countersunk holes. Application: DIY Construction Deburring, smoothing holes in steel, plast..

R 159.51

Ex VAT:R 138.70

Contact us

Stockist

Stock: 3897 Model: T DE PH0265B UPC: 6009515878900

D/END PHIL.2X65MM PWR.BIT BULK

Double-ended bit Phillips Tip #: 2 Hex shank: 6.35mm (1/4") Length: 65mm Packaging: Bulk Application: The tips have been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 - Magnetic screwdriver bit holder. TCFS200 - Flexible shaft bit holder. T BH54C - Magnetic bit holder and extension 54mm (carded). T B..

R 18.75

Ex VAT:R 16.30

Contact us

Stockist

Stock: 255 Model: T DE PHSL65B UPC: 6009515878917

D/END PH.2XSL.5 65MM PWR.B BLK

Double-ended bit Phillips Tip #: 2 Slot-head: 5mm Hex shank: 6.35mm (1/4") Length: 65mm Packaging: Bulk Application: The tips have been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 - Magnetic screwdriver bit holder. TCFS200 - Flexible shaft bit holder. T BH54C - Magnetic bit holder and extension 54mm (c..

R 18.75

Ex VAT:R 16.30

Contact us

Stockist

Stock: 1229 Model: T MBH54B UPC: 6009515815172

MAGNETIC BIT HOLDER 54MM BULK SOLID ONE PIECE

Magnetic bit holder Hex shank: 6.35mm (1/4") Length: 54mm Packaging: Bulk Application: The bit holder is used with all hex shank 6.35mm bits. The bit holder features a magnet to keep the bit in place and to assist with holding screws when screwdriving. The shank is compatible with the Snap-it! Quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector....

R 93.96

Ex VAT:R 81.70

Contact us

Stockist

Stock: 1089 Model: T NS01 UPC: 6009515804459

NUTSETTER 5/16X65MM MAG. BULK

Nutsetter Size: 5/16" (7.9mm) Length: 65mm Packaging: Bulk Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 49.85

Ex VAT:R 43.35

Contact us

Stockist

Stock: 1189 Model: T NS02 UPC: 6009515804466

NUTSETTER 3/8X65MM MAG. BULK

Nutsetter Size: 3/8" (9.5mm) Length: 65mm Packaging: Bulk Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 49.97

Ex VAT:R 43.45

Contact us

Stockist

Stock: 287 Model: T NS06065C UPC: 6009515814212

NUTSETTER MAGNETIC 6X65MM CARDED

Nutsetter Size: 6mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 59.11

Ex VAT:R 51.40

Contact us

Stockist

In Stock Soon

Stock: In Stock Soon Model: T NS07065C UPC: 6009515805128

NUTSETTER MAGNETIC 7X65MM CARDED

Nutsetter Size: 7mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 70.67

Ex VAT:R 61.45

New Expected Date :

08/08/2025

Contact us

Stockist

Stock: 3344 Model: T NS08065C UPC: 6009515805135

NUTSETTER MAGNETIC 8X65MM CARDED

Nutsetter Size: 8mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 75.79

Ex VAT:R 65.90

Contact us

Stockist

Stock: 205 Model: T NS09 UPC: 6009515831288

NUTSETTER 13MMX65MM BULK

Nutsetter Size: 13mm Length: 65mm Packaging: Bulk Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 51.29

Ex VAT:R 44.60

Contact us

Stockist

Stock: 1020 Model: T NS10065C UPC: 6009515805142

NUTSETTER MAGNETIC 10X65MM CARDED

Nutsetter Size: 10mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 75.79

Ex VAT:R 65.90

Contact us

Stockist

Stock: 550 Model: T NS12065C UPC: 6009515805159

NUTSETTER MAGNETIC 12X65MM CARDED

Nutsetter Size: 12mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 76.19

Ex VAT:R 66.25

Contact us

Stockist

Stock: 762 Model: T NS14 UPC: 6009515842680

NUTSETTER 1/4 X65MM MAG. BULK

NUTSETTER 1/4 X65MM MAG. BULK....

R 56.24

Ex VAT:R 48.90

Contact us

Stockist

Stock: 492 Model: T NS38045C UPC: 6009675082346

NUTSETTER 3/8"X 45MM CARDED

Nutsetter Size: 3/8" (9.5mm) Length: 45mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 67.85

Ex VAT:R 59.00

Contact us

Stockist

Stock: 295 Model: T NS38065C UPC: 6009675082353

NUTSETTER 3/8"X 65MM CARDED

Nutsetter Size: 3/8" (9.5mm) Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A....

R 71.70

Ex VAT:R 62.35

Contact us

Stockist

Stock: 277 Model: T PH0165C UPC: 6009675083701

D/END PH1 X PH1 65MM 1/CARD

D/END PH1 X PH1 65MM 1/CARD....

R 39.39

Ex VAT:R 34.25

Contact us

Stockist

Stock: 1545 Model: T PH0225B UPC: 6009515815158

PHIL.2 X 25MM INSERT BIT BULK

Phillips bit Phillips Tip #: 2 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 - Magnetic screwdriver bit holder. TZ AC23 - Magnetic screw guide and extension. TCFS200 - Flexible shaft bit holder. T AD14014C - ..

R 9.26

Ex VAT:R 8.05

Contact us

Stockist

Stock: 1417 Model: T PH0225C UPC: 6009600407343

PHIL.2 X 25MM INS.BIT 2/CARD

Phillips bit Phillips Tip #: 2 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Carded 2 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 - Magnetic screwdriver bit holder. TZ AC23 - Magnetic screw guide and extension. TCFS200 - Flexible shaft bit holder. T AD14014..

R 40.94

Ex VAT:R 35.60

Contact us

Stockist

Stock: 341 Model: T PHDW025-1 UPC: 6009515865511

PHILIPS NO.2 X 25MM DRYWALL BIT POUCH

PHILIPS NO.2 X 25MM DRYWALL BIT POUCH....

R 35.71

Ex VAT:R 31.05

Contact us

Stockist

Stock: 1439 Model: T PHS0265C UPC: 6009675083725

D/END PH2 X 5MM SL.65MM 1/CARD

D/END PH2 X 5MM SL.65MM 1/CARD....

R 39.39

Ex VAT:R 34.25

Contact us

Stockist

Stock: 1343 Model: T PZ0125C UPC: 6009675082964

POZI.1 X 25MM INS.BIT 2/CARD

Pozidrive bit Pozidrive Tip #: 1 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Carded 2 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 - Magnetic screwdriver bit holder. TZ AC23 - Magnetic screw guide and extension. TCFS200 - Flexible shaft bit holder. T AD140..

R 40.94

Ex VAT:R 35.60

Contact us

Stockist

Stock: 673 Model: T PZ0150C UPC: 6009600407367

POZI.1 X 50MM POWER BIT 1/CARD

Pozidrive bit Pozidrive Tip #: 1 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Carded sizes available: 25mm (Carded 2): #1 - 25..

R 39.39

Ex VAT:R 34.25

Contact us

Stockist

Stock: 2904 Model: T PZ02150B UPC: 6009515831363

POZI.2 X 150MM POWER BIT BULK

Pozidrive bit Pozidrive Tip #: 2 Hex shank: 6.35mm (1/4") Length: 150mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Bulk sizes available: 25mm: #1 - 25mm - T PZ0125..

R 45.14

Ex VAT:R 39.25

Contact us

Stockist

Stock: 58 Model: T PZ02150C UPC: 6009515803490

POZI NO.2 POWER BIT X 150MM CARDED

Pozidrive bit Pozidrive Tip #: 2 Hex shank: 6.35mm (1/4") Length: 150mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Carded sizes available: 25mm (Carded 2): #1 - 2..

R 49.16

Ex VAT:R 42.75

Contact us

Stockist

Stock: 1133 Model: T PZ0245C UPC: 6009675083657

D/END PZ2 X PZ2 45MM 1/CARD

D/END PZ2 X PZ2 45MM 1/CARD....

R 39.39

Ex VAT:R 34.25

Contact us

Stockist

Stock: 4619 Model: T PZ0250C UPC: 6009600407374

POZI.2 X 50MM POWER BIT 1/CARD

Pozidrive bit Pozidrive Tip #: 2 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Carded sizes available: 25mm (Carded 2): #1 - 25..

R 39.39

Ex VAT:R 34.25

Contact us

Stockist

Stock: 975 Model: T PZ0289B UPC: 6009515831400

POZI.2 X 89MM POWER BIT BULK

Pozidrive bit Pozidrive Tip #: 2 Hex shank: 6.35mm (1/4") Length: 89mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Bulk sizes available: 25mm: #1 - 25mm - T PZ0125B..

R 25.01

Ex VAT:R 21.75

Contact us

Stockist

Stock: 262 Model: T PZ0325C UPC: 6009675082988

POZI.3 X 25MM INS.BIT 2/CARD

Pozidrive bit Pozidrive Tip #: 3 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Carded 2 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 - Magnetic screwdriver bit holder. TZ AC23 - Magnetic screw guide and extension. TCFS200 - Flexible shaft bit holder. T AD140..

R 40.94

Ex VAT:R 35.60

Contact us

Stockist

Stock: 861 Model: T SC2500801C UPC: 6009515849160

INSERT BIT SET 8PCE SLOTTED 3MM-9MM 25MM

Bit Set 8 Piece Slotted 3mm-9mm Specifications: High grade alloy steel Rust resistant sand blasted finish Use with Tork Craft bit holders Standard ¼” hex shank Use with the below Tork Craft bit holders: T BH54C MAG.BIT HOLDER 54MM CARDED T BH60C MAG.BIT HOLDER 60MM CARDED T BH75C MAG.BIT HOLDER 75MM CARDED....

R 99.36

Ex VAT:R 86.40

Contact us

Stockist

Stock: 723 Model: T SC2500803C UPC: 6009515849184

INSERT BIT SET 8PCE HEX H1.5 - H6 25MM ALLEN SIZE1.5 2 2.5 3 4 5 5.5 6

Screwdriver bit set - HEX (Allenkey) 8 Piece Sizes 1,5mm up to 6mm Specifications: High grade alloy steel Rust resistant sand blasted finish Use with Tork Craft bit holders Standard ¼” hex shank Use with the below Tork Craft bit holders: T BH54C MAG.BIT HOLDER 54MM CARDED T BH60C MAG.BIT HOLDER 60MM CARDED T BH75C MAG.BIT HOLDER 75MM CARDED....

R 89.76

Ex VAT:R 78.05

Contact us

Stockist

Stock: 1140 Model: T SC50005C UPC: 6009675082384

S/D POWER BIT SET 50MM 5PCE

S/D POWER BIT SET 50MM 5PCE....

R 84.58

Ex VAT:R 73.55

Contact us

Stockist

Stock: 120 Model: T SL0450C UPC: 6009675086191

S/D POWER BIT 4MMX50MM SLOTTED 1/CD

Slot-head bit Slot-head size: 4mm Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Carded sizes available: 25mm (Carded 2): Slot..

R 34.27

Ex VAT:R 29.80

Contact us

Stockist

Stock: 348 Model: T SL0650C UPC: 6009675086214

S/D POWER BIT 6MMX50MM SLOTTED 1/CD

Slot-head bit Slot-head size: 6mm Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Carded sizes available: 25mm (Carded 2): Slot..

R 34.27

Ex VAT:R 29.80

Contact us

Stockist

Stock: 1013 Model: T SL1050C UPC: 6009675086238

S/D POWER BIT 10MMX50MM SLOTTED 1/CD

Slot-head bit Slot-head size: 10mm Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Carded sizes available: 25mm (Carded 2): Slo..

R 34.27

Ex VAT:R 29.80

Contact us

Stockist

Stock: 850 Model: T SP05000C UPC: 6009675082544

SCREW PILOT SET 5PCE CARDED

Screw Pilot bit set Screw Pilot bit set Convenience in one operation Drill pilot hole and countersink in one operation Use with 6.35mm (1/4 inch) quick release chuck / connector or conventional chuck Set inlcudes No. 6, No. 8, No. 10 and No. 12 bits....

R 370.88

Ex VAT:R 322.50

Contact us

Stockist

Stock: 2149 Model: T SP10075C UPC: 6009675082520

SCREW PILOT NO.10 X 75MM CARD

Screw Pilot No.10 Screw Pilot #10 Screw Gauge - 3.2mm Drill bit Convenience in one operation Drill pilot hole and countersink in one operation Use with 6.35mm (1/4 inch) quick release chuck / connector or conventional chuck....

R 113.62

Ex VAT:R 98.80

Contact us

Stockist

Stock: 177 Model: T SP35 UPC: 6009515809935

REPLACEMENT DRILL BIT FOR SCREW PILOT #12

Spare screw pilot drill bit Spare Part This drill bit is a spare part for screw pilot bit #12 See Related TAB above Size: &O/; 3.5mm....

R 27.77

Ex VAT:R 24.15

Contact us

Stockist

Stock: 267 Model: T SQ01150B UPC: 6009515831455

SQUARE RECESS PWR BIT NO.1X150MM BULK

Robertson square recess bit Robertson Tip #: 1 Hex shank: 6.35mm (1/4") Length: 150mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Bulk sizes available: 25mm: #0 - 25..

R 58.31

Ex VAT:R 50.70

Contact us

Stockist

Stock: 308 Model: T SQ0125B UPC: 6009515831462

SQUARE RECESS BIT #1 25MM - BULK

Robertson square recess bit Robertson Tip #: 1 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 - Magnetic screwdriver bit holder. TZ AC23 - Magnetic screw guide and extension. TCFS200 - Flexible shaft bit holder. ..

R 7.13

Ex VAT:R 6.20

Contact us

Stockist

Stock: 1030 Model: T SQ0150B UPC: 6009515831479

SQUARE RECESS PWR BIT NO.1X50MM BULK

Robertson square recess bit Robertson Tip #: 1 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Bulk sizes available: 25mm: #0 - 25m..

R 9.20

Ex VAT:R 8.00

Contact us

Stockist

Stock: 549 Model: T SQ0150C UPC: 6009515806040

SQUARE RECESS PWR BIT NO.1X50MM 1/CARD

Robertson square recess bit Robertson Tip #: 1 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector Carded sizes available: 25mm (Car..

R 31.40

Ex VAT:R 27.30

Contact us

Stockist

South Africa's #1 Supplier of Power Tools Accessories

Inside Vermont Sales

Corporate Information

Legal Information

Store Display Concepts

Warranties offered

Filter

TORK CRAFT