Annular Hole Cutter Tct 83 X 55mm Weld Shank 31.75mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 22
Model: TCAC083-4
Weight: 0.82kg
Pack Dim: 125.00mm x 115.00mm x 140.00mm
UPC: 6009515895297

Price:

R 4,064.15

Ex VAT: R 3,534.04

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 83 × 55 mm, 31.75 mm (1¼″) Weldon

Size: 83 mm x 55 mm [1¼″ Weldon Shank]

The 83 mm diameter TCT annular cutter from Tork Craft is built for major-clearance hole applications in steel and cast-iron where the hole size is large. With a 55 mm cutting depth and 31.75 mm (1¼″) Weldon shank, it delivers fast, burr-reduced holes and lower feed force — ideal for flange, pipe or structural work where precision and speed matter.

Extra Information

Use with a magnetic-base drill or drill-press with compatible 31.75 mm (1¼″) Weldon arbour.
A pilot pin (sold separately) is required for centring the cutter and slug ejection — verify compatibility with your arbor and setup.
When drilling stainless steel or harder grades, use appropriate cutting fluid and maintain steady feed to protect the cutter and ensure chip clearance.

Pro Tip

Clean and flatten the magnet base surface. Start at a low speed until the cutter begins to bite, then increase feed when consistent curled chips appear. For large-diameter shallow cuts, pause after each hole to clear chips and apply lubricant to prolong tool life and improve finish.

Features

83 mm diameter — suitable for very large bolt or pipe clearance holes and heavy-structure penetrations.
55 mm cutting depth — shallow for large diameter holes in plate or structural material.
31.75 mm (1¼″) Weldon shank — two-flat drive ensures secure clamp in magnetic drills or Weldon-arbor setups.
TCT (tungsten-carbide-tipped) teeth — long-life cutting edges for steel, cast-iron and structural materials.
Thin-wall, multi-flute body — promotes faster penetration and efficient chip ejection even at large diameters.

Benefits

Speed in large diameters: only the peripheral ring is removed, making big holes quicker than conventional twist drills for the same size.
Cleaner finish: fewer burrs and smoother edges reduce rework and improve fit-up.
Lower feed effort: large diameter but shallow depth keeps feed manageable, especially for on-site setups.
Robust for heavy duty: TCT tips with Weldon shank provide consistent performance in structural applications.

Safety

Wear eye, ear and gloves protection; apply cutting fluid to manage heat and assist chip removal.
Ensure magnet base or clamp is firmly secured and the workpiece stable; use a tether when working overhead or on angled surfaces.
Do not use hammer or impact drive; maintain steady feed and allow the slug to eject cleanly—stop immediately if feed slows or chatter begins.
Disconnect power or disable magnet before changing cutters, shanks or pilot pins.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC083-4
Product Type	Annular hole cutter (TCT)
Diameter	83 mm
Cutting Depth	55 mm
Shank	31.75 mm (1¼″) Weldon, two-flat drive
Tip Material	Tungsten-carbide-tipped
Suitable Materials	Mild & structural steel, cast-iron, large-diameter clearance holes
Recommended Machine	Magnetic-base drill / drill-press with Weldon shank arbor
Pilot Pin	Required for centring & slug ejection
Pack Quantity	1