Stock: 149
Model: TCDB20115-3
UPC: 6009515812584
Diamond blade
TYPE:
Segmented
DIAMETER: Ø115mm
BORE: &O/;22.23mmmm
MAX RPM: 13,300
USE: Brick, concrete, cement block, granite, fiber cement,
tile, stucco, stone and other masonry materials.
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow be..
R 117.65
Ex VAT:R 102.30
Stock: 273
Model: TCDB20125
UPC: 6009675087891
Segmented Rim for building materials 125mm
PROFESSIONAL
For concrete, brick, concrete pavers, masonry/block, hard/reinforced
concrete, and limestone
Professional Series Diamond Blade with Segmented Rim for building materials.
Standard 22.23mm bore size to fit all makes of handheld angle grinders.
Segmented Rim blades give the roughest cut and is used for concrete, brick, concrete
pavers, masonry/block, hard/reinforced concrete, and limestone. This blade is usually
referred to as a ..
R 100.05
Ex VAT:R 87.00
Stock: 371
Model: TCDB20180
UPC: 6009675086993
Segmented Rim for building materials 180mm
PROFESSIONAL
For concrete, brick, concrete pavers, masonry/block, hard/reinforced
concrete, and limestone
Professional Series Diamond Blade with Segmented Rim for building materials.
Standard 22.23mm bore size to fit all makes of handheld angle grinders.
Segmented Rim blades give the roughest cut and is used for concrete, brick, concrete
pavers, masonry/block, hard/reinforced concrete, and limestone. This blade is usually
referred to as a ..
R 233.91
Ex VAT:R 203.40
Stock: 48
Model: TCDB20300-1
UPC: 6009515819675
Diamond blade
TYPE:
Hot pressed, long life and segmented.
DIAMETER: Ø300mm
BORE: &O/;25.4mm
MAX RPM: 5,000
USE: Brick, concrete, cement block, granite, fiber cement,
stone and other masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow bet..
R 1,189.10
Ex VAT:R 1,034.00
Stock: 27
Model: TCDB20300-10
UPC: 6009515820138
DIAMOND BLADE 300 x 25.4MM ASPHALT HOT PRESSED SEGMENTED TAR....
R 1,477.41
Ex VAT:R 1,284.70
Stock: 15
Model: TCDB20300-2
UPC: 6009515819682
Diamond blade
TYPE:
Laser weld and industrial segmented.
DIAMETER: Ø300mm
BORE: &O/;25.4mm
MAX RPM: 5,000
USE: Marble, granite, concrete, masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are ..
R 1,605.92
Ex VAT:R 1,396.45
Stock: 34
Model: TCDB20350-5
UPC: 6009515819736
Diamond blade
TYPE:
Hot pressed, long life and segmented.
DIAMETER: Ø350mm
BORE: &O/;25.4mm
MAX RPM: 4,300
USE: Asphalt
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powde..
R 1,645.94
Ex VAT:R 1,431.25
In Stock Soon
Stock: In Stock Soon
Model: TCDB30230
UPC: 6009515812553
Diamond blade
TYPE:
Segmented
DIAMETER: &O/;2305mm
BORE: &O/;22.23mmmm
USE: Reinforced concrete
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder and metal powders. Th..
R 327.52
Ex VAT:R 284.80
New Expected Date :
- 19/09/2025
Stock: 50
Model: TCDB40200
UPC: 6009515805838
DIAMOND BLADE 200X25.4MM TURBO....
R 292.73
Ex VAT:R 254.55
In Stock Soon
Stock: In Stock Soon
Model: TCDB430125
UPC: 6009515802851
Diamond blade
TYPE:
Laser welded and turbo segmented.
DIAMETER: Ø125mm
BORE: &O/;22.23mm
MAX RPM: 12,000
USE: Brick, concrete, cement block, granite, fiber cement,
stone and other masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow betwe..
R 98.56
Ex VAT:R 85.70
New Expected Date :
- 19/09/2025
Stock: 55
Model: TCDB70115-1
UPC: 6009515858766
DIAMOND BLADE SEG.115 x 22.23MM VACUUM BRAZED FOR METAL CUTTING....
R 278.01
Ex VAT:R 241.75
Stock: 4
Model: TCDB70230
UPC: 6009675088133
Diamond blade for metal cutting
TYPE:
Laser weld and segmented
DIAMETER: Ø230mm
BORE: &O/;22.23mm
MAX RPM: 6,600
USE: Metal cutting
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of d..
R 645.73
Ex VAT:R 561.50
Stock: 15
Model: TCDP11000
UPC: 6009515824372
TorkCraft - Wet Diamond Polishing Pad
Grit: #50
Application:
The Tork Craft wet diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
....
R 136.85
Ex VAT:R 119.00
Stock: 82
Model: TCDP20007
UPC: 6009515863562
SET OF 7 DIAMOND POLISHING PADS 100MM DRY USE....
R 1,875.36
Ex VAT:R 1,630.75
Stock: 64
Model: TCDP20050
UPC: 6009515863579
TorkCraft - Dry Use Diamond Polishing Pad
Grit: #50
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC....
R 263.29
Ex VAT:R 228.95
Stock: 173
Model: TCDP20500
UPC: 6009515863609
TorkCraft - Dry Use Diamond Polishing Pad
Grit: #500
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SP....
R 263.29
Ex VAT:R 228.95
Stock: 204
Model: TCDP22000
UPC: 6009515863623
TorkCraft - Dry Use Diamond Polishing Pad
Grit: #2000
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or S....
R 263.29
Ex VAT:R 228.95
Stock: 78
Model: TCDS25080
UPC: 6009515802639
25.4mm drum sanding sleeves
Drum sanding sleeves to use with drum sanding
arbor.[click
here]
SIZE: &O/; 25.4mm
GRIT: P80
These sleeves fit onto arbor code
TCDS25....
R 54.51
Ex VAT:R 47.40
Stock: 19
Model: TCE18524-20
UPC: 6009675086948
BLADE TCT EURO TIP 185 X 24T 20-16 PROFESIONAL....
R 801.61
Ex VAT:R 697.05
Stock: 13
Model: TCE23024-30
UPC: 6009675086955
BLADE TCT EURO TIP 230 X 24T 30-1-20-16 PROFESIONAL....
R 1,057.60
Ex VAT:R 919.65
Stock: 12
Model: TCE23060AL
UPC: 6009675088393
BLADE TCT EURO TIP ALUM 230 X 60 30-16MM PROFESIONAL....
R 1,175.24
Ex VAT:R 1,021.95
Stock: 11
Model: TCE25048
UPC: 6009675084623
BLADE TCT EURO TIP 250 X 48T 30/1/20/16 PROFESIONAL....
R 908.50
Ex VAT:R 790.00
Stock: 207
Model: TCFA0205
UPC: 6009515827045
Face off disc
Designed
to remove paint, rust and other materials, while hardly affecting the underlying
surface.
SIZE: &O/;50mm
Application:
These face off discs are designed to remove rust, paint and other materials
from metal surfaces.....
R 313.20
Ex VAT:R 272.35
Stock: 245
Model: TCFA0706
UPC: 6009675084470
Face off disc
For
use with a portable or stationary drill.
Dia:
&O/;100mm
Application:
It is ideal for removing coatings on a variety of substrates, such as
wood,
metal and plastics.
The disc is incorporated with extruded nylon fibres, flexible resin technology
and coarse abrasive grains.
Always make use of the necessary safety equipment when using machinery
or powertools!....
R 220.57
Ex VAT:R 191.80
Stock: 16925
Model: TCFD115-2-120
UPC: 6009515801687
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: &O/;115
GRIT: P120
SURFACE :15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 28.87
Ex VAT:R 25.10
Stock: 18251
Model: TCFD115-2-60
UPC: 6009675088164
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: &O/;115
GRIT: P60
SURFACE :15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 28.87
Ex VAT:R 25.10
Stock: 2670
Model: TCFD115-3-60
UPC: 6009515801717
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: &O/;115
GRIT: P60
SURFACE : Flat
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 37.20
Ex VAT:R 32.35
Stock: 10834
Model: TCFD115-3-80
UPC: 6009515801724
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: &O/;115
GRIT: P80
SURFACE : Flat
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 37.20
Ex VAT:R 32.35
Stock: 26457
Model: TCFD115-40
UPC: 6009600404502
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: &O/;115
GRIT: P40
SURFACE : Flat
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 26.28
Ex VAT:R 22.85
Stock: 2310
Model: TCFD180-2-40
UPC: 6009675088188
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: &O/;180
GRIT: P40
SURFACE :15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 86.88
Ex VAT:R 75.55
Stock: 514
Model: TCFD180-2-80
UPC: 6009675088195
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: &O/;180
GRIT: P80
SURFACE :15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.
Wear eye, face, body and respiratory protection.....
R 86.88
Ex VAT:R 75.55
Stock: 1390
Model: TCFD180-4-80
UPC: 6009515801595
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø180
GRIT: P80
SURFACE : 15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 99.65
Ex VAT:R 86.65
Stock: 1090
Model: TCFD230-40
UPC: 6009515857196
FLAP SANDING DISC 230MM 40GRIT A/O....
R 161.40
Ex VAT:R 140.35
Stock: 395
Model: TCFS200
UPC: 6009515803124
Flexible shaft bit holder
For
bit:
1/4" Hex
Shank: 1/4" Hex male
Length: 200mm
Application:
The bit holder is flexible and it is used to reach in an area which is
normally not accessible.
The bit holder can be used with a cordless drill or with a
T 938001 magnetic screwdriver bit holder.
....
R 101.78
Ex VAT:R 88.50
Stock: 69
Model: TCGR100-1
UPC: 6009515819880
GRINDING WHEEL 100X50MM M14 BORE - #36 BOWL - ANGLE GRINDER....
R 199.30
Ex VAT:R 173.30
Stock: 141
Model: TCGR110-1
UPC: 6009515819903
GRINDING WHEEL 110X58MM M22 BORE - BOWL#36 - ANGLE GRINDER....
R 163.59
Ex VAT:R 142.25
Stock: 51
Model: TCGR150-12
UPC: 6009515834944
Grinding wheel for bench grinder
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: Ø150mm
WIDTH: 20mm
BORE: &O/;32mm
GRIT: 60
ABRASIVE: Aluminium oxide
MAX RPM: 3800
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximise cut rate, wheel life and finish
on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled
steel.
Used for offhand grinding tempered and har..
R 165.37
Ex VAT:R 143.80
Stock: 130
Model: TCGR150-3
UPC: 6009515830298
Grinding wheel for bench grinder
For use with bench grinders to grind steel
DIAMETER: Ø150mm
WIDTH: 25mm
BORE: &O/;32mm
GRIT: 36
ABRASIVE: Silicon Carbide
MAX RPM: 3800
Application:
Ideal for workshops – re-sharpening of tools e.g. chisels etc. Maximised cut rate, wheel life and finish on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled steel
Deburring steel and thread rods.
Shaping of ferrous metals (carbon steel, steel, iron, t..
R 165.37
Ex VAT:R 143.80
In Stock Soon
Stock: In Stock Soon
Model: TCGR150-5
UPC: 6009515830311
Grinding wheel for bench grinder
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: Ø150mm
WIDTH: 25mm
BORE: &O/;32mm
GRIT: 36
ABRASIVE: Aluminium oxide
MAX RPM: 3800
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximise cut rate, wheel life and finish
on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled
steel.
Used for offhand grinding tempered and har..
R 165.37
Ex VAT:R 143.80
New Expected Date :
- 15/09/2025
In Stock Soon
Stock: In Stock Soon
Model: TCGR200-4
UPC: 6009515830267
Grinding wheel for bench grinder
For use with bench grinders to grind steel
DIAMETER: Ø200mm
WIDTH: 25mm
BORE: &O/;32mm
GRIT: 60
ABRASIVE: Silicon Carbide
MAX RPM: 2100
Application:
Ideal for workshops – re-sharpening of tools e.g. chisels etc. Maximised cut rate, wheel life and finish on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled steel
Deburring steel and thread rods.
Shaping of ferrous metals (carbon steel, steel, iron, t..
R 296.18
Ex VAT:R 257.55
New Expected Date :
- 15/09/2025
- 15/12/2025
Stock: 326
Model: TCGR200-5
UPC: 6009515830274
Grinding wheel for bench grinder
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: Ø200mm
WIDTH: 25mm
BORE: &O/;32mm
GRIT: 36
ABRASIVE: Aluminium oxide
MAX RPM: 2100
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximise cut rate, wheel life and finish
on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled
steel.
Used for offhand grinding tempered and har..
R 296.18
Ex VAT:R 257.55
Stock: 184
Model: TCMT001DC
UPC: 6009515827205
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping range is &O/;0.3-3.2mm.
TCMT001 accessories:
TCMT001DC
Drill chuck 0-3.2mm
TCMT001FS
Flexible shaft
TCMT001SS
Telescopic hanging hook stand with desk clamp
TCMT001-2-3-1
Collet with nut 3.2mm
TCMT001-2-3-2
Collet with nut 2.3mm
TCMT001..
R 147.03
Ex VAT:R 127.85
Stock: 504
Model: TCMT001SS
UPC: 6009515827199
Telescopic stand for TCMT001 rotary tool
Application:
The telescopic hanging hook stand is fitted to a desk clamp and it can be
adjusted in height. It is ideally used together with the flexible shaft (TCMT001FS).
The rotary tool is hung on the hook of the stand to keep the tool safely out
of the way. It also minimizes the chance for the flexible shaft to loop.
IMPORTANT:
Do not have loops in the flexible shaft when in use.
TCMT001 accessories:
TCMT001DC
Dr....
R 436.54
Ex VAT:R 379.60
In Stock Soon
Stock: In Stock Soon
Model: TCMT005
UPC: 6009515829940
Engraver
Engraver: TCMT005
Application:
The engraver is supplied with two stencils. The stencils allow letters and
numbers to be accurately engraved on plastics and metals.
The engraver is
popularly used to engrave serial numbers or details on equipment.
The engraver&s intensity can be adjusted depending on the material it is
being used on.....
R 459.89
Ex VAT:R 399.90
New Expected Date :
- 15/10/2025
Stock: 58
Model: TCNC18514
UPC: 6009675088201
BLADE TCT NAIL CUTTING 185X14T 20-16MM....
R 333.50
Ex VAT:R 290.00
Stock: 1091
Model: TCNW115-2
UPC: 6009515835828
Non-woven flap disc
The non-woven discs fit on an angle grinder and is used for cleaning/light
deburring materials.
The Non-woven discs are available in:
COARSE - Yellow
MEDIUM - Red
FINE - Blue
EXTRA FINE - Grey
Wear eye, face, body and respiratory protection.....
R 155.88
Ex VAT:R 135.55
Stock: 251
Model: TCNY07506
UPC: 6009515819323
NYLON CUP BRUSH 75 X 6MM TCW....
R 125.18
Ex VAT:R 108.85
Stock: 308
Model: TCNY10006
UPC: 6009515819309
NYLON WHEEL BRUSH 100 X 6MM TCW....
R 112.99
Ex VAT:R 98.25
In Stock Soon
Stock: In Stock Soon
Model: TCOA003
UPC: 6009515843083
QUICK CHANGE DIAMOND BOOT SAW BLADE 57MM(2-1/4")....
R 154.62
Ex VAT:R 134.45
New Expected Date :
- 26/09/2025
Stock: 163
Model: TCOA005
UPC: 6009515843106
QUICK CHANGE FLUSH CUT METAL SAW BLADE 22MM(7/8")18TPI....
R 114.54
Ex VAT:R 99.60