Tork Craft Contractor TCT Circular Saw Blade 200 mm × 60 T × 30/20/16 mm (Aluminium) Highlights: 200 mm diameter Contractor Series blade with 60 tungsten-carbide tipped teeth and 30/20/16 mm bore compatibility, optimised for aluminium and non-ferrous materials The Tork Craft Contractor TCT Circular Saw Blade 200 mm × 60 T × 30/20/16 mm (Aluminium) is designed for tradespeople working with aluminium sheet, profiles and light-metal fabrication. With its high tooth count and robust Contractor Series construction, it delivers smooth, clean cuts in non-ferrous materials while maintaining the reliability and durability expected in a professional tool. Featuring a 30 mm arbor bore with included reducing bushes for 20 mm and 16 mm fits, this blade offers broad compatibility across your fleet of saws. The Contractor Series build means daily cuts without compromise — not an entry-level product, but a trade-ready solution for professionals who demand quality and performance. What is the Tork Craft Contractor Series TCT blade for aluminium? The Contractor Series from Tork Craft represents a professional-grade line of circular saw blades built for tradespeople whose tools must perform day in and day out. This aluminium-specific variant adds high tooth geometry and non-ferrous suited construction so you can cut profiles, sheet and trim with cleaner edges and less follow-up finishing...

Tork Craft Contractor TCT Circular Saw Blade 210 mm × 60 T × 30/16 mm (Aluminium) Highlights: 210 mm diameter Contractor Series blade with 60 carbide-tipped teeth and 30/16 mm bore, specifically optimised for aluminium and non-ferrous materials The Tork Craft Contractor TCT Circular Saw Blade 210 mm × 60 T × 30/16 mm (Aluminium) is manufactured for professionals who work with sheet, extrusions and profiles in non-ferrous materials. With a high tooth count of 60 and specially designed geometry for aluminium, the blade delivers cleaner cuts and reduced burrs, improving finish and saving you time on rework. The Contractor Series is not a budget substitute — it is engineered for trade use, built to deliver consistent, reliable performance day after day. The 30 mm bore with optional 16 mm reducing bush (30/16 mm fit) ensures secure fitment on compatible saws. Whether in the workshop or on site, this blade holds up under demand. What is the Tork Craft Contractor Series TCT circular saw blade for aluminium? This blade is part of the Contractor Series trade-grade range from Tork Craft. Designed for durability and professional use, it targets aluminium and light non-ferrous cutting tasks where precision and finish matter — not just rough cuts...

Tork Craft Contractor Series TCT Circular Saw Blade 160mm × 60T × 20/16mm (Aluminium) Highlights: 160mm diameter Contractor Series TCT blade specially designed for aluminium, with 60 precision-ground teeth and 20/16mm bore for high-finish, clean cuts The Tork Craft Contractor Series TCT Circular Saw Blade 160mm × 60T × 20/16mm (Aluminium) is engineered for professionals working with light metals such as aluminium, non-ferrous alloys and similar materials. With a high tooth count of 60 and tungsten carbide tips, the blade delivers exceptionally smooth edges and minimal burr formation when used correctly. Supplied with a 20mm bore and 16mm reducing bush, it fits most standard circular saws on site and in the workshop. As part of the Contractor Series, this blade brings dependable, high-performance cutting to aluminium applications — ensuring fast, accurate, professional-level results when finish matters. What is the Tork Craft Contractor Series TCT Blade for Aluminium? The Tork Craft Contractor Series TCT blade for aluminium is a specialist variant within the Contractor Series. It is built for site-ready performance when working with non-ferrous metals, offering high-tooth geometry, superior edge quality and robust construction. It is not a general woodworking blade — it’s tailored for aluminium, light-metal trimming, fabrication and joinery tasks where clean finish and precision are vital...

Tork Craft Contractor TCT Circular Saw Blade 170mm × 60T × 20/16mm (Aluminium) Highlights: 170mm diameter Contractor Series TCT blade with 60 precision-tipped teeth, 20/16mm bore and optimised for aluminium and other non-ferrous metals The Tork Craft Contractor TCT Circular Saw Blade 170mm × 60T × 20/16mm (Aluminium) is part of the Contractor Series — a professional-grade blade engineered for tradespeople working with aluminium, light metals and non-ferrous materials. With a high tooth count of 60 carbide-tipped teeth, this blade delivers clean, burr-reduced cuts in aluminium sheet, extrusions and profiles. Supplied with a 20mm bore and inclusive 16mm reducing bush, this blade fits a variety of circular saws used in the workshop or on site. Its 170mm size provides good cutting depth while remaining manageable, and the Contractor Series build ensures reliable, repeated performance where accuracy and finish matter. What is the Tork Craft Contractor Series TCT circular saw blade for aluminium? The Tork Craft Contractor Series TCT blade for aluminium is a specialist variant within the Contractor range designed specifically for non-ferrous metal cutting. These blades are built to work in demanding site and fabrication environments, offering professional durability and finish. Ideal for aluminium joinery, framework, trims and sheet-metal work where clean edges and reliable performance are essential...

Tork Craft Contractor TCT Circular Saw Blade 185 mm × 60 T × 20/16 mm (Aluminium) Highlights: 185 mm diameter Contractor Series TCT blade with 60 precision-tipped teeth and 20/16 mm bore, optimised for aluminium and non-ferrous materials The Tork Craft Contractor TCT Circular Saw Blade 185 mm × 60 T × 20/16 mm (Aluminium) is part of the Contractor Series — crafted for professionals who work with aluminium, light non-ferrous metals and need high-finish cuts. With 60 tungsten carbide-tipped teeth, this blade delivers smoother, cleaner edges in sheet, profile and trim work on aluminium, reducing the need for heavy finishing. Supplied with a 20 mm bore and a 16 mm reducing bush for broader compatibility, this blade fits a wide selection of saws used on site or in the workshop. As a member of the Contractor Series, its construction emphasises dependability, durability and performance rather than compromise. What is the Tork Craft Contractor Series TCT blade for aluminium? This specialist blade is part of the Tork Craft Contractor Series, designed for tradespeople who require reliable, high-quality cutting performance on aluminium and non-ferrous metals. These are not budget options; they are professional-grade tools built for regular use in demanding environments where finish and precision matter...

Tork Craft Contractor TCT Circular Saw Blade 185 mm × 60 T × 30 mm (Aluminium) Highlights: 185 mm Contractor Series blade with 60 teeth and a dedicated 30 mm bore for precision aluminium cutting The Tork Craft Contractor TCT Circular Saw Blade 185 mm × 60 T × 30 mm (Aluminium) is built for tradespeople who cut aluminium sheets, extrusions, profiles and light non-ferrous materials. With 60 tungsten-carbide tipped teeth, it provides smooth, burr-reduced cuts that minimise finishing work while maintaining the reliability expected from the Contractor Series. This version features a fixed 30 mm bore with no reducing bushes, ensuring a solid, stable fit on saws designed for 30 mm arbors. With its Contractor-grade construction, the blade is designed to withstand demanding daily use where precision and consistency matter. What is the Tork Craft Contractor Series TCT aluminium blade? This blade forms part of the Tork Craft Contractor Series — a professional range created for tradespeople who rely on dependable, repeatable cutting performance. Designed for aluminium rather than timber, it offers specialised tooth geometry and construction for clean, accurate cutting on non-ferrous materials...

Tork Craft Contractor TCT Circular Saw Blade 190 mm × 60T × 30/20/16 mm (Aluminium) Highlights: 190 mm diameter Contractor Series blade with 60 carbide-tipped teeth and 30/20/16 mm bore compatibility, specifically optimised for aluminium and light alloy cutting The Tork Craft Contractor TCT Circular Saw Blade 190 mm × 60T × 30/20/16 mm (Aluminium) is part of the Contractor Series — a professional-grade blade designed for demanding trade environments where multiple materials and consistent performance matter. With 60 tungsten carbide-tipped teeth, this blade delivers high-quality, smoother cuts in aluminium sheets, non-ferrous extrusions and joinery, reducing edge burr, chatter and finishing time. Featuring a broad-fit bore configuration (30 mm standard, with reducing bushes for 20 mm and 16 mm), it fits a wide range of circular saws used on site or in the workshop. Built using Contractor Series material and design standards, this blade is not a budget or hobby-grade item — it is engineered for professionals who demand both performance and longevity. What is the Tork Craft Contractor Series TCT blade for aluminium? This blade is part of the Contractor Series, representing a trade-focused line built for regular use, durable construction and reliable results. Unlike economy alternatives, these blades are designed with materials, tooth geometry and build-quality to handle real-world job-site demands and deliver credible edge finish, especially in non-ferrous metal contexts...

Tork Craft Contractor TCT Circular Saw Blade 230 mm × 60 T × 30/20/16 mm (Aluminium) Highlights: 230 mm diameter Contractor Series blade with 60 tungsten-carbide tipped teeth and 30/20/16 mm multi-bore fitment, optimised for aluminium and non-ferrous materials The Tork Craft Contractor TCT Circular Saw Blade 230 mm × 60 T × 30/20/16 mm (Aluminium) is designed for tradespeople working with aluminium sheets, extrusions, profiles and trim. With a high tooth count and Contractor Series construction, it delivers smooth, clean cuts in non-ferrous materials while maintaining the durability and performance expected on-site and in the workshop. Featuring a 30 mm main bore with reducing bushes for 20 mm and 16 mm arbors, this blade offers broad compatibility across your saw fleet. The Contractor Series designation means this blade is not a budget substitute — it’s built for professionals who demand consistent results and long service life. What is the Tork Craft Contractor Series TCT circular saw blade? This blade is part of the Contractor Series from Tork Craft, a professional-grade line designed for trade use. These blades combine carbide-tipped teeth, robust construction and multi-bore fitment options to deliver trusted performance across a variety of job-site and workshop conditions...

Tork Craft Contractor TCT Circular Saw Blade 250 mm × 100 T × 30/25.4/20/16 mm (Aluminium) Highlights: 250 mm diameter Contractor Series blade with 100 precision-tipped carbide teeth and multi-bore fitment (30 mm, 25.4 mm/1″, 20 mm & 16 mm) via included spacers The Tork Craft Contractor TCT Circular Saw Blade 250 mm × 100 T × 30/25.4/20/16 mm (Aluminium) is built for professionals working with sheet- and profile aluminium, non-ferrous metals and trim work where finish and precision matter. With 100 tungsten carbide-tipped teeth, this blade delivers ultra-smooth cuts, minimal burrs and a premium edge quality straight off the saw. Included in the kit are reducing spacers to allow mounting on 1″ (25.4 mm), 20 mm and 16 mm arbors in addition to the main 30 mm bore—offering broad compatibility across tool fleets. As part of the Contractor Series, this blade emphasises trade-grade durability, consistent performance and professional results—not economy compromise. What is the Tork Craft Contractor Series TCT circular saw blade for aluminium? The Contractor Series from Tork Craft is a professional-grade line designed for tradespeople whose tools must perform daily. This aluminium-specific variant adds fine-finish tooth geometry tailored to non-ferrous materials and broad bore-fit flexibility, so you can cut profiles, sheet and trim with cleaner edges and less follow-up finishing...

Tork Craft Contractor TCT Circular Saw Blade 250 mm × 80 T × 30/25.4/20/16 mm Highlights: 250 mm diameter Contractor Series blade with 80 precision-tipped carbide teeth and multi-bore fitment (30 mm, 25.4 mm / 1″, 20 mm & 16 mm) via included spacers The Tork Craft Contractor TCT Circular Saw Blade 250 mm × 80 T × 30/25.4/20/16 mm is engineered for professionals working with sheet goods, laminates, veneer panels and joinery stock where finish and precision matter. The 80 tungsten carbide-tipped teeth deliver a very smooth cut, reducing sanding and clean-up on visible surfaces. Included with the blade are reducing spacers allowing fitment to 25.4 mm (1″), 20 mm and 16 mm arbor sizes in addition to the standard 30 mm bore—ideal for diverse tool fleets. Though part of the Contractor Series, this blade is not a budget variant—it’s built for durability, consistent high performance in demanding environments and long service life. What is the Tork Craft Contractor Series TCT circular saw blade? The Contractor Series from Tork Craft is a professional-grade range designed for tradespeople who rely on their tools day-in, day-out. These blades offer robust construction, carbide-tipped precision and broad fitment flexibility—giving you fewer compromises and more consistent results...

Tork Craft Contractor Circular Saw Blade 300 mm × 96T × 30/25.4/20/16mm TCT (Aluminium) Highlights: 300 mm diameter, 96 tooth extra-fine finish TCT contractor blade designed for aluminium and boards, with spacers for 30 mm, 25.4 mm (1″), 20 mm and 16 mm arbors The Tork Craft TCP30096AL is part of the contractor-quality blade range, precisely engineered for finish work and demanding cuts in aluminium, composite panels, man-made boards and timber. With 96 teeth and tungsten carbide tipped (TCT) construction, it offers exceptional edge finish and long service life, making it ideal for cabinetry, shopfitting and professional trim applications. Supplied with reduction spacers to match arbor sizes of 25.4 mm (1″), 20 mm and 16 mm, this blade gives you maximum compatibility and flexibility across your saw machines. Achieve cleaner results and less chip-out with the high tooth count and specialist aluminium profile. What is the Tork Craft TCP30096AL contractor blade? The Tork Craft TCP30096AL is a 300 mm diameter circular saw blade with 96 teeth, TCT tungsten carbide tips and part of the contractor quality range. It features a 30 mm bore plus included spacers for 25.4 mm (1″), 20 mm and 16 mm arbors, making it compatible with multiple saw setups. Designed for trimmed cross-cuts, fine finish work and smooth edges in aluminium, composite panels and board materials, this blade offers premium cut quality for professional woodworkers and contractors alike...

Tork Craft Contractor Circular Saw Blade 315 mm × 96T × 30/25.4/20/16mm TCT (Aluminium & Board Materials) Highlights: 315 mm diameter, 96-tooth extra-fine TCT contractor blade with spacers for 30 mm, 25.4 mm (1″), 20 mm and 16 mm arbors The Tork Craft TCP31596AL is part of the contractor-quality blade range, engineered for precision and exceptional edge finish when cutting aluminium, laminates, composite boards and fine timber. With a high tooth count of 96 and tungsten carbide tipped (TCT) construction, it delivers a very smooth surface finish and minimal chip-out even on brittle or coated materials. Supplied with reduction spacers for 25.4 mm (1″), 20 mm and 16 mm, this blade offers flexible compatibility across various saw setups. Its 315 mm diameter allows larger sheet cutting and board processing while maintaining the finish quality associated with finish-grade blades. What is the Tork Craft TCP31596AL contractor blade? The Tork Craft TCP31596AL is a 315 mm diameter circular saw blade featuring 96 TCT teeth and a contractor-quality build. It has a standard 30 mm bore with included spacers to reduce to 25.4 mm (1″), 20 mm and 16 mm–great for compatibility across many machines. It is designed for ultra-fine cross-cutting, finishing, and trimming in aluminium, composite panels, laminates and high-grade boards, delivering smooth edges and high reliability...

Tork Craft Contractor Circular Saw Blade 350 mm × 100T × 30/25.4 TCT (Aluminium & Boards) Highlights: 350 mm diameter, 100-tooth TCG (triple-chip grind) negative-angle profile TCT contractor blade with spacers for 30 mm, 25.4 mm (1″), arbors The Tork Craft TCP350100AL is part of our contractor-quality blade range, designed for high-precision finish cutting in aluminium, composite panels, laminates and board materials. With its very high tooth count and TCG negative grind profile, this blade offers a superb surface finish, minimal chip-out and excellent performance even on difficult or brittle materials. Included reduction spacers for 25.4 mm (1″), arbors make the blade compatible with a wide variety of saw machines. The 350 mm size gives the capacity for larger sheet cutting and board processing, while maintaining the professional finish demanded by cabinetry, shop-fitting and aluminium fabrication. What is the Tork Craft TCP350100AL contractor blade? The Tork Craft TCP350100AL is a 350 mm diameter circular saw blade with 100 tungsten carbide tipped teeth, using a TCG negative grind (TCG-Neg) geometry designed for cutting aluminium and board materials with ultra-clean edge quality. It uses a standard 30 mm bore but is supplied with spacer rings to fit 25.4 mm (1″), arbor sizes, making it versatile across many saw setups. As part of the contractor-quality range, it is built for both durability and precision in workshop or on-site environments...

Tork Craft TCT Saw Blade 250 × 80T 30mm Alum TCG Negative Heading: 250 mm diameter, 80 teeth, 30 mm bore, negative hook TCG for aluminium and metal sheets The Tork Craft TCPR25080AL is a specialist 250 mm diameter tungsten-carbide-tipped (TCT) circular saw blade engineered for clean, efficient cutting of aluminium, non-ferrous metals, composite panels and sheet goods. With 80 trapezoidal carbide geometry (TCG) teeth arranged in a negative-hook pattern, it’s designed to minimise edge-chipping, burr creation and heat build-up during high precision cuts. Built for professionals and heavy-duty environments, this blade features a 30 mm bore (suitable for machines with 30 mm arbor) and is pre-balanced for stable rotation at higher speeds. While ideally matched to aluminium and non-ferrous metals, it also supports fine work in wood-based or composite sheet materials when clean edge finish is paramount. Industrial quality range The “Professional / Industrial” label denotes that this blade is part of Tork Craft’s high-duty line, created for workshops and job-sites where frequent cuts, demanding materials and tight tolerances are required...